linux-toradex.git/include/uapi/linux/virtio_ids.h, branch v5.3-rc6

Merge tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2019-07-18T17:52:08+00:00

Pull libnvdimm updates from Dan Williams:
 "Primarily just the virtio_pmem driver:

   - virtio_pmem

     The new virtio_pmem facility introduces a paravirtualized
     persistent memory device that allows a guest VM to use DAX
     mechanisms to access a host-file with host-page-cache. It arranges
     for MAP_SYNC to be disabled and instead triggers a host fsync()
     when a 'write-cache flush' command is sent to the virtual disk
     device.

   - Miscellaneous small fixups"

* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  virtio_pmem: fix sparse warning
  xfs: disable map_sync for async flush
  ext4: disable map_sync for async flush
  dax: check synchronous mapping is supported
  dm: enable synchronous dax
  libnvdimm: add dax_dev sync flag
  virtio-pmem: Add virtio pmem driver
  libnvdimm: nd_region flush callback support
  libnvdimm, namespace: Drop uuid_t implementation detail

virtio-pmem: Add virtio pmem driver

2019-07-05T22:19:10+00:00

This patch adds virtio-pmem driver for KVM guest.

Guest reads the persistent memory range information from
Qemu over VIRTIO and registers it on nvdimm_bus. It also
creates a nd_region object with the persistent memory
range information so that existing 'nvdimm/pmem' driver
can reserve this into system memory map. This way
'virtio-pmem' driver uses existing functionality of pmem
driver to register persistent memory compatible for DAX
capable filesystems.

This also provides function to perform guest flush over
VIRTIO from 'pmem' driver when userspace performs flush
on DAX memory range.

Signed-off-by: Pankaj Gupta 
Reviewed-by: Yuval Shaia 
Acked-by: Michael S. Tsirkin 
Acked-by: Jakub Staron 
Tested-by: Jakub Staron 
Reviewed-by: Cornelia Huck 
Signed-off-by: Dan Williams

iommu: Add virtio-iommu driver

2019-06-06T21:32:13+00:00

The virtio IOMMU is a para-virtualized device, allowing to send IOMMU
requests such as map/unmap over virtio transport without emulating page
tables. This implementation handles ATTACH, DETACH, MAP and UNMAP
requests.

The bulk of the code transforms calls coming from the IOMMU API into
corresponding virtio requests. Mappings are kept in an interval tree
instead of page tables. A little more work is required for modular and x86
support, so for the moment the driver depends on CONFIG_VIRTIO=y and
CONFIG_ARM64.

Tested-by: Bharat Bhushan 
Tested-by: Eric Auger 
Reviewed-by: Eric Auger 
Signed-off-by: Jean-Philippe Brucker 
Signed-off-by: Michael S. Tsirkin

crypto: add virtio-crypto driver

2016-12-15T22:13:32+00:00

This patch introduces virtio-crypto driver for Linux Kernel.

The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The encryption anddecryption requests
are placed in the data queue and are ultimately handled by
thebackend crypto accelerators. The second queue is the
control queue used to create or destroy sessions for
symmetric algorithms and will control some advanced features
in the future. The virtio crypto device provides the following
cryptoservices: CIPHER, MAC, HASH, and AEAD.

For more information about virtio-crypto device, please see:
  http://qemu-project.org/Features/VirtioCrypto

CC: Michael S. Tsirkin 
CC: Cornelia Huck 
CC: Stefan Hajnoczi 
CC: Herbert Xu 
CC: Halil Pasic 
CC: David S. Miller 
CC: Zeng Xin 
Signed-off-by: Gonglei 
Signed-off-by: Michael S. Tsirkin

VSOCK: Introduce virtio_vsock_common.ko

2016-08-01T23:57:29+00:00

This module contains the common code and header files for the following
virtio_transporto and vhost_vsock kernel modules.

Signed-off-by: Asias He 
Signed-off-by: Claudio Imbrenda 
Signed-off-by: Stefan Hajnoczi 
Signed-off-by: Michael S. Tsirkin

Add virtio gpu driver.

2015-06-03T12:17:38+00:00

This patch adds a kms driver for the virtio gpu.  The xorg modesetting
driver can handle the device just fine, the framebuffer for fbcon is
there too.

Qemu patches for the host side are under review currently.

The pci version of the device comes in two variants: with and without
vga compatibility.  The former has a extra memory bar for the vga
framebuffer, the later is a pure virtio device.  The only concern for
this driver is that in the virtio-vga case we have to kick out the
firmware framebuffer.

Initial revision has only 2d support, 3d (virgl) support requires
some more work on the qemu side and will be added later.

Signed-off-by: Dave Airlie 
Signed-off-by: Gerd Hoffmann 
Acked-by: Michael S. Tsirkin

Add virtio-input driver.

2015-03-29T01:43:52+00:00

virtio-input is basically evdev-events-over-virtio, so this driver isn't
much more than reading configuration from config space and forwarding
incoming events to the linux input layer.

Signed-off-by: Gerd Hoffmann 
Acked-by: Michael S. Tsirkin 
Signed-off-by: Rusty Russell

caif_virtio: Introduce caif over virtio

2013-03-20T03:36:06+00:00

Add the CAIF Virtio shared memory driver for talking
to a modem.

This CAIF Link layer communicates to the modem over
shared memory. It is implemented as a virtio_driver.
The underlying virtio device is managed by the remoteproc
framework. The Virtio queue is used for transmitting data
to the modem, and the new vringh is used for receiving data.

Genalloc is used for managing the shared memory used for TX
data. The default dma-alloc-coherent allocator can only
allocate whole pages, and this wastes too much shared memory.

Flow control is implemented by stopping the TX-queues if the
virtio queues go full or we run out of memory. Queued are
reopened when queues are below the watermark.

NAPI is used in RX path, and a dedicated tasklet is used
for releasing TX buffers.

Signed-off-by: Erwan Yvin 
Acked-by: David S. Miller 
Signed-off-by: Rusty Russell  (minor fixes)

virtio_console: Add support for remoteproc serial

2012-12-18T04:50:44+00:00

Add a simple serial connection driver called
VIRTIO_ID_RPROC_SERIAL (11) for communicating with a
remote processor in an asymmetric multi-processing
configuration.

This implementation reuses the existing virtio_console
implementation, and adds support for DMA allocation
of data buffers and disables use of tty console and
the virtio control queue.

Signed-off-by: Sjur Brændeland 
Acked-by: Amit Shah 
Signed-off-by: Rusty Russell

UAPI: (Scripted) Disintegrate include/linux

2012-10-13T09:46:48+00:00

Signed-off-by: David Howells 
Acked-by: Arnd Bergmann 
Acked-by: Thomas Gleixner 
Acked-by: Michael Kerrisk 
Acked-by: Paul E. McKenney 
Acked-by: Dave Jones