linux-toradex.git/include/uapi/linux/xfrm.h, branch v5.1-rc1

xfrm: Add a new lookup key to match xfrm interfaces.

2018-06-23T14:07:15+00:00

This patch adds the xfrm interface id as a lookup key
for xfrm states and policies. With this we can assign
states and policies to virtual xfrm interfaces.

Signed-off-by: Steffen Klassert 
Acked-by: Shannon Nelson 
Acked-by: Benedict Wong 
Tested-by: Benedict Wong 
Tested-by: Antony Antony 
Reviewed-by: Eyal Birger

xfrm: Extend the output_mark to support input direction and masking.

2018-06-23T14:06:57+00:00

We already support setting an output mark at the xfrm_state,
unfortunately this does not support the input direction and
masking the marks that will be applied to the skb. This change
adds support applying a masked value in both directions.

The existing XFRMA_OUTPUT_MARK number is reused for this purpose
and as it is now bi-directional, it is renamed to XFRMA_SET_MARK.

An additional XFRMA_SET_MARK_MASK attribute is added for setting the
mask. If the attribute mask not provided, it is set to 0xffffffff,
keeping the XFRMA_OUTPUT_MARK existing 'full mask' semantics.

Co-developed-by: Tobias Brunner 
Co-developed-by: Eyal Birger 
Co-developed-by: Lorenzo Colitti 
Signed-off-by: Steffen Klassert 
Signed-off-by: Tobias Brunner 
Signed-off-by: Eyal Birger 
Signed-off-by: Lorenzo Colitti

License cleanup: add SPDX license identifier to uapi header files with no license

2017-11-02T10:19:54+00:00

Many user space API headers are missing licensing information, which
makes it hard for compliance tools to determine the correct license.

By default are files without license information under the default
license of the kernel, which is GPLV2.  Marking them GPLV2 would exclude
them from being included in non GPLV2 code, which is obviously not
intended. The user space API headers fall under the syscall exception
which is in the kernels COPYING file:

   NOTE! This copyright does *not* cover user programs that use kernel
   services by normal system calls - this is merely considered normal use
   of the kernel, and does *not* fall under the heading of "derived work".

otherwise syscall usage would not be possible.

Update the files which contain no license information with an SPDX
license identifier.  The chosen identifier is 'GPL-2.0 WITH
Linux-syscall-note' which is the officially assigned identifier for the
Linux syscall exception.  SPDX license identifiers are a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.  See the previous patch in this series for the
methodology of how this patch was researched.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

net: xfrm: support setting an output mark.

2017-08-11T05:03:00+00:00

On systems that use mark-based routing it may be necessary for
routing lookups to use marks in order for packets to be routed
correctly. An example of such a system is Android, which uses
socket marks to route packets via different networks.

Currently, routing lookups in tunnel mode always use a mark of
zero, making routing incorrect on such systems.

This patch adds a new output_mark element to the xfrm state and
a corresponding XFRMA_OUTPUT_MARK netlink attribute. The output
mark differs from the existing xfrm mark in two ways:

1. The xfrm mark is used to match xfrm policies and states, while
   the xfrm output mark is used to set the mark (and influence
   the routing) of the packets emitted by those states.
2. The existing mark is constrained to be a subset of the bits of
   the originating socket or transformed packet, but the output
   mark is arbitrary and depends only on the state.

The use of a separate mark provides additional flexibility. For
example:

- A packet subject to two transforms (e.g., transport mode inside
  tunnel mode) can have two different output marks applied to it,
  one for the transport mode SA and one for the tunnel mode SA.
- On a system where socket marks determine routing, the packets
  emitted by an IPsec tunnel can be routed based on a mark that
  is determined by the tunnel, not by the marks of the
  unencrypted packets.
- Support for setting the output marks can be introduced without
  breaking any existing setups that employ both mark-based
  routing and xfrm tunnel mode. Simply changing the code to use
  the xfrm mark for routing output packets could xfrm mark could
  change behaviour in a way that breaks these setups.

If the output mark is unspecified or set to zero, the mark is not
set or changed.

Tested: make allyesconfig; make -j64
Tested: https://android-review.googlesource.com/452776
Signed-off-by: Lorenzo Colitti 
Signed-off-by: Steffen Klassert

xfrm: Add an IPsec hardware offloading API

2017-04-14T08:06:10+00:00

This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.

Joint work with:
Ilan Tayari 
Guy Shapiro 
Yossi Kuperman 

Signed-off-by: Guy Shapiro 
Signed-off-by: Ilan Tayari 
Signed-off-by: Yossi Kuperman 
Signed-off-by: Steffen Klassert

xfrm: fix header file comment reference to struct xfrm_replay_state_esn

2016-09-09T07:10:07+00:00

Reported-by: Paul Wouters 
Signed-off-by: Richard Guy Briggs 
Signed-off-by: Steffen Klassert

xfrm: align nlattr properly when needed

2016-04-24T00:13:25+00:00

Signed-off-by: Nicolas Dichtel 
Signed-off-by: David S. Miller

xfrm: simplify xfrm_address_t use

2015-03-31T17:58:35+00:00

In many places, the a6 field is typecasted to struct in6_addr. As the
fields are in union anyway, just add in6_addr type to the union and
get rid of the typecasting.

Modifying the uapi header is okay, the union has still the same size.

Signed-off-by: Jiri Benc 
Signed-off-by: David S. Miller

xfrm: configure policy hash table thresholds by netlink

2014-09-02T11:37:56+00:00

Enable to specify local and remote prefix length thresholds for the
policy hash table via a netlink XFRM_MSG_NEWSPDINFO message.

prefix length thresholds are specified by XFRMA_SPD_IPV4_HTHRESH and
XFRMA_SPD_IPV6_HTHRESH optional attributes (struct xfrmu_spdhthresh).

example:

    struct xfrmu_spdhthresh thresh4 = {
        .lbits = 0;
        .rbits = 24;
    };
    struct xfrmu_spdhthresh thresh6 = {
        .lbits = 0;
        .rbits = 56;
    };
    struct nlmsghdr *hdr;
    struct nl_msg *msg;

    msg = nlmsg_alloc();
    hdr = nlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, XFRMA_SPD_IPV4_HTHRESH, sizeof(__u32), NLM_F_REQUEST);
    nla_put(msg, XFRMA_SPD_IPV4_HTHRESH, sizeof(thresh4), &thresh4);
    nla_put(msg, XFRMA_SPD_IPV6_HTHRESH, sizeof(thresh6), &thresh6);
    nla_send_auto(sk, msg);

The numbers are the policy selector minimum prefix lengths to put a
policy in the hash table.

- lbits is the local threshold (source address for out policies,
  destination address for in and fwd policies).

- rbits is the remote threshold (destination address for out
  policies, source address for in and fwd policies).

The default values are:

XFRMA_SPD_IPV4_HTHRESH: 32 32
XFRMA_SPD_IPV6_HTHRESH: 128 128

Dynamic re-building of the SPD is performed when the thresholds values
are changed.

The current thresholds can be read via a XFRM_MSG_GETSPDINFO request:
the kernel replies to XFRM_MSG_GETSPDINFO requests by an
XFRM_MSG_NEWSPDINFO message, with both attributes
XFRMA_SPD_IPV4_HTHRESH and XFRMA_SPD_IPV6_HTHRESH.

Signed-off-by: Christophe Gouault 
Signed-off-by: Steffen Klassert

xfrm: rename struct xfrm_filter

2014-03-07T07:12:37+00:00

iproute2 already defines a structure with that name, let's use another one to
avoid any conflict.

CC: Stephen Hemminger 
Signed-off-by: Nicolas Dichtel 
Signed-off-by: Steffen Klassert