Pull libnvdimm updates from Dan Williams:
 "The bulk of this has been in -next since before the merge window
  opened, with no known collisions / issues reported.

  The only detail worth noting, outside the summary below, is that the
  "libnvdimm-start-pad" topic has been truncated to just cleanups and
  small fixes. The full topic branch would have doubled down on hacks
  around the "section alignment" limitation of the core-mm, instead
  effort is now being spent to address that root issue in the memory
  hotplug implementation for v5.2.

   - Fix nfit-bus command submission regression

   - Support retrieval of short-ARS results if the ARS state is
     "requires continuation", and even if the "no_init_ars" module
     parameter is specified

   - Allow busy-polling of the kernel ARS state by allowing root to
     reset the exponential back-off timer

   - Filter potentially stale ARS results by tracking query-ARS relative
     to the previous start-ARS

   - Enhance dax_device alignment checks

   - Add support for the Hyper-V family of device-specific-methods
     (DSMs)

   - Add several fixes and workarounds for Hyper-V compatibility

   - Fix support to cache the dirty-shutdown-count at init"

* tag 'libnvdimm-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (25 commits)
  libnvdimm/namespace: Clean up holder_class_store()
  libnvdimm/of_pmem: Fix platform_no_drv_owner.cocci warnings
  acpi/nfit: Update NFIT flags error message
  libnvdimm/btt: Fix LBA masking during 'free list' population
  libnvdimm/btt: Remove unnecessary code in btt_freelist_init
  libnvdimm/pfn: Remove dax_label_reserve
  dax: Check the end of the block-device capacity with dax_direct_access()
  nfit/ars: Avoid stale ARS results
  nfit/ars: Allow root to busy-poll the ARS state machine
  nfit/ars: Introduce scrub_flags
  nfit/ars: Remove ars_start_flags
  nfit/ars: Attempt short-ARS even in the no_init_ars case
  nfit/ars: Attempt a short-ARS whenever the ARS state is idle at boot
  acpi/nfit: Require opt-in for read-only label configurations
  libnvdimm/pmem: Honor force_raw for legacy pmem regions
  libnvdimm/pfn: Account for PAGE_SIZE > info-block-size in nd_pfn_init()
  libnvdimm: Fix altmap reservation size calculation
  libnvdimm, pfn: Fix over-trim in trim_pfn_device()
  acpi/nfit: Fix bus command validation
  libnvdimm/dimm: Add a no-BLK quirk based on NVDIMM family
  ...

Pull fuse updates from Miklos Szeredi:
 "Scalability and performance improvements, as well as minor bug fixes
  and cleanups"

* tag 'fuse-update-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (25 commits)
  fuse: cache readdir calls if filesystem opts out of opendir
  fuse: support clients that don't implement 'opendir'
  fuse: lift bad inode checks into callers
  fuse: multiplex cached/direct_io file operations
  fuse add copy_file_range to direct io fops
  fuse: use iov_iter based generic splice helpers
  fuse: Switch to using async direct IO for FOPEN_DIRECT_IO
  fuse: use atomic64_t for khctr
  fuse: clean up aborted
  fuse: Protect ff->reserved_req via corresponding fi->lock
  fuse: Protect fi->nlookup with fi->lock
  fuse: Introduce fi->lock to protect write related fields
  fuse: Convert fc->attr_version into atomic64_t
  fuse: Add fuse_inode argument to fuse_prepare_release()
  fuse: Verify userspace asks to requeue interrupt that we really sent
  fuse: Do some refactoring in fuse_dev_do_write()
  fuse: Wake up req->waitq of only if not background
  fuse: Optimize request_end() by not taking fiq->waitq.lock
  fuse: Kill fasync only if interrupt is queued in queue_interrupt()
  fuse: Remove stale comment in end_requests()
  ...

Merge several updates to the ARS implementation. Highlights include:

* Support retrieval of short-ARS results if the ARS state is "requires
  continuation", and even if the "no_init_ars" module parameter is
  specified.
* Allow busy-polling of the kernel ARS state by allowing root to reset
  the exponential back-off timer.
* Filter potentially stale ARS results by tracking query-ARS relative to
  the previous start-ARS.

Merge miscellaneous libnvdimm sub-system updates for v5.1. Highlights
include:

* Support for the Hyper-V family of device-specific-methods (DSMs)
* Several fixes and workarounds for Hyper-V compatibility.
* Fix for the support to cache the dirty-shutdown-count at init.

Pull IOMMU updates from Joerg Roedel:

 - A big cleanup and optimization patch-set for the Tegra GART driver

 - Documentation updates and fixes for the IOMMU-API

 - Support for page request in Intel VT-d scalable mode

 - Intel VT-d dma_[un]map_resource() support

 - Updates to the ATS enabling code for PCI (acked by Bjorn) and Intel
   VT-d to align with the latest version of the ATS spec

 - Relaxed IRQ source checking in the Intel VT-d driver for some aliased
   devices, needed for future devices which send IRQ messages from more
   than on request-ID

 - IRQ remapping driver for Hyper-V

 - Patches to make generic IOVA and IO-Page-Table code usable outside of
   the IOMMU code

 - Various other small fixes and cleanups

* tag 'iommu-updates-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits)
  iommu/vt-d: Get domain ID before clear pasid entry
  iommu/vt-d: Fix NULL pointer reference in intel_svm_bind_mm()
  iommu/vt-d: Set context field after value initialized
  iommu/vt-d: Disable ATS support on untrusted devices
  iommu/mediatek: Fix semicolon code style issue
  MAINTAINERS: Add Hyper-V IOMMU driver into Hyper-V CORE AND DRIVERS scope
  iommu/hyper-v: Add Hyper-V stub IOMMU driver
  x86/Hyper-V: Set x2apic destination mode to physical when x2apic is available
  PCI/ATS: Add inline to pci_prg_resp_pasid_required()
  iommu/vt-d: Check identity map for hot-added devices
  iommu: Fix IOMMU debugfs fallout
  iommu: Document iommu_ops.is_attach_deferred()
  iommu: Document iommu_ops.iotlb_sync_map()
  iommu/vt-d: Enable ATS only if the device uses page aligned address.
  PCI/ATS: Add pci_ats_page_aligned() interface
  iommu/vt-d: Fix PRI/PASID dependency issue.
  PCI/ATS: Add pci_prg_resp_pasid_required() interface.
  iommu/vt-d: Allow interrupts from the entire bus for aliased devices
  iommu/vt-d: Add helper to set an IRTE to verify only the bus number
  iommu: Fix flush_tlb_all typo
  ...

Pull arm64 updates from Catalin Marinas:

 - Pseudo NMI support for arm64 using GICv3 interrupt priorities

 - uaccess macros clean-up (unsafe user accessors also merged but
   reverted, waiting for objtool support on arm64)

 - ptrace regsets for Pointer Authentication (ARMv8.3) key management

 - inX() ordering w.r.t. delay() on arm64 and riscv (acks in place by
   the riscv maintainers)

 - arm64/perf updates: PMU bindings converted to json-schema, unused
   variable and misleading comment removed

 - arm64/debug fixes to ensure checking of the triggering exception
   level and to avoid the propagation of the UNKNOWN FAR value into the
   si_code for debug signals

 - Workaround for Fujitsu A64FX erratum 010001

 - lib/raid6 ARM NEON optimisations

 - NR_CPUS now defaults to 256 on arm64

 - Minor clean-ups (documentation/comments, Kconfig warning, unused
   asm-offsets, clang warnings)

 - MAINTAINERS update for list information to the ARM64 ACPI entry

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  arm64: mmu: drop paging_init comments
  arm64: debug: Ensure debug handlers check triggering exception level
  arm64: debug: Don't propagate UNKNOWN FAR into si_code for debug signals
  Revert "arm64: uaccess: Implement unsafe accessors"
  arm64: avoid clang warning about self-assignment
  arm64: Kconfig.platforms: fix warning unmet direct dependencies
  lib/raid6: arm: optimize away a mask operation in NEON recovery routine
  lib/raid6: use vdupq_n_u8 to avoid endianness warnings
  arm64: io: Hook up __io_par() for inX() ordering
  riscv: io: Update __io_[p]ar() macros to take an argument
  asm-generic/io: Pass result of I/O accessor to __io_[p]ar()
  arm64: Add workaround for Fujitsu A64FX erratum 010001
  arm64: Rename get_thread_info()
  arm64: Remove documentation about TIF_USEDFPU
  arm64: irqflags: Fix clang build warnings
  arm64: Enable the support of pseudo-NMIs
  arm64: Skip irqflags tracing for NMI in IRQs disabled context
  arm64: Skip preemption when exiting an NMI
  arm64: Handle serror in NMI context
  irqchip/gic-v3: Allow interrupts to be set as pseudo-NMI
  ...

Pull device mapper updates from Mike Snitzer:

 - Update bio-based DM core to always call blk_queue_split() and update
   DM targets to properly advertise discard limits that
   blk_queue_split() looks at when dtermining to split discard. Whereby
   allowing DM core's own 'split_discard_bios' to be removed.

 - Improve DM cache target to provide support for discard passdown to
   the origin device.

 - Introduce support to directly boot to a DM mapped device from init by
   using dm-mod.create= module param. This eliminates the need for an
   elaborate initramfs that is otherwise needed to create DM devices.

   This feature's implementation has been worked on for quite some time
   (got up to v12) and is of particular interest to Android and other
   more embedded platforms (e.g. ARM).

 - Rate limit errors from the DM integrity target that were identified
   as the cause for recent NMI hangs due to console limitations.

 - Add sanity checks for user input to thin-pool and external snapshot
   creation.

 - Remove some unused leftover kmem caches from when old .request_fn
   request-based support was removed.

 - Various small cleanups and fixes to targets (e.g. typos, needless
   unlikely() annotations, use struct_size(), remove needless
   .direct_access method from dm-snapshot)

* tag 'for-5.1/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm integrity: limit the rate of error messages
  dm snapshot: don't define direct_access if we don't support it
  dm cache: add support for discard passdown to the origin device
  dm writecache: fix typo in name for writeback_wq
  dm: add support to directly boot to a mapped device
  dm thin: add sanity checks to thin-pool and external snapshot creation
  dm block manager: remove redundant unlikely annotation
  dm verity fec: remove redundant unlikely annotation
  dm integrity: remove redundant unlikely annotation
  dm: always call blk_queue_split() in dm_process_bio()
  dm: fix to_sector() for 32bit
  dm switch: use struct_size() in kzalloc()
  dm: remove unused _rq_tio_cache and _rq_cache
  dm: eliminate 'split_discard_bios' flag from DM target interface
  dm: update dm_process_bio() to split bio if in ->make_request_fn()

Pull media updates from Mauro Carvalho Chehab:

 - remove sensor drivers that got converted from soc_camera

 - remaining soc_camera drivers got moved to staging

 - some documentation cleanups and improvements

 - the imx staging driver now supports imx7

 - the ov9640, mt9m001 and mt9m111 got converted from soc_camera

 - the vim2m driver now does what a m2m convert driver expects to do

 - epoll() fixes on media subsystems

 - several drivers fixes, typos, cleanups and improvements

* tag 'media/v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (346 commits)
  media: dvb/earth-pt1: fix wrong initialization for demod blocks
  media: vim2m: Address some coding style issues
  media: vim2m: don't use BUG()
  media: vim2m: speedup passthrough copy
  media: vim2m: add an horizontal scaler
  media: vim2m: don't accept YUYV anymore as output format
  media: vim2m: add vertical linear scaler
  media: vim2m: better handle cap/out buffers with different sizes
  media: vim2m: use different framesizes for bayer formats
  media: vim2m: add support for VIDIOC_ENUM_FRAMESIZES
  media: vim2m: ensure that width is multiple of two
  media: vim2m: improve debug messages
  media: vim2m: add bayer capture formats
  media: a few more typos at staging, pci, platform, radio and usb
  media: Documentation: fix several typos
  media: staging: fix several typos
  media: include: fix several typos
  media: common: fix several typos
  media: v4l2-core: fix several typos
  media: usb: fix several typos
  ...

Pull io_uring IO interface from Jens Axboe:
 "Second attempt at adding the io_uring interface.

  Since the first one, we've added basic unit testing of the three
  system calls, that resides in liburing like the other unit tests that
  we have so far. It'll take a while to get full coverage of it, but
  we're working towards it. I've also added two basic test programs to
  tools/io_uring. One uses the raw interface and has support for all the
  various features that io_uring supports outside of standard IO, like
  fixed files, fixed IO buffers, and polled IO. The other uses the
  liburing API, and is a simplified version of cp(1).

  This adds support for a new IO interface, io_uring.

  io_uring allows an application to communicate with the kernel through
  two rings, the submission queue (SQ) and completion queue (CQ) ring.
  This allows for very efficient handling of IOs, see the v5 posting for
  some basic numbers:

    https://lore.kernel.org/linux-block/20190116175003.17880-1-axboe@kernel.dk/

  Outside of just efficiency, the interface is also flexible and
  extendable, and allows for future use cases like the upcoming NVMe
  key-value store API, networked IO, and so on. It also supports async
  buffered IO, something that we've always failed to support in the
  kernel.

  Outside of basic IO features, it supports async polled IO as well.
  This particular feature has already been tested at Facebook months ago
  for flash storage boxes, with 25-33% improvements. It makes polled IO
  actually useful for real world use cases, where even basic flash sees
  a nice win in terms of efficiency, latency, and performance. These
  boxes were IOPS bound before, now they are not.

  This series adds three new system calls. One for setting up an
  io_uring instance (io_uring_setup(2)), one for submitting/completing
  IO (io_uring_enter(2)), and one for aux functions like registrating
  file sets, buffers, etc (io_uring_register(2)). Through the help of
  Arnd, I've coordinated the syscall numbers so merge on that front
  should be painless.

  Jon did a writeup of the interface a while back, which (except for
  minor details that have been tweaked) is still accurate. Find that
  here:

    https://lwn.net/Articles/776703/

  Huge thanks to Al Viro for helping getting the reference cycle code
  correct, and to Jann Horn for his extensive reviews focused on both
  security and bugs in general.

  There's a userspace library that provides basic functionality for
  applications that don't need or want to care about how to fiddle with
  the rings directly. It has helpers to allow applications to easily set
  up an io_uring instance, and submit/complete IO through it without
  knowing about the intricacies of the rings. It also includes man pages
  (thanks to Jeff Moyer), and will continue to grow support helper
  functions and features as time progresses. Find it here:

    git://git.kernel.dk/liburing

  Fio has full support for the raw interface, both in the form of an IO
  engine (io_uring), but also with a small test application (t/io_uring)
  that can exercise and benchmark the interface"

* tag 'io_uring-2019-03-06' of git://git.kernel.dk/linux-block:
  io_uring: add a few test tools
  io_uring: allow workqueue item to handle multiple buffered requests
  io_uring: add support for IORING_OP_POLL
  io_uring: add io_kiocb ref count
  io_uring: add submission polling
  io_uring: add file set registration
  net: split out functions related to registering inflight socket files
  io_uring: add support for pre-mapped user IO buffers
  block: implement bio helper to add iter bvec pages to bio
  io_uring: batch io_kiocb allocation
  io_uring: use fget/fput_many() for file references
  fs: add fget_many() and fput_many()
  io_uring: support for IO polling
  io_uring: add fsync support
  Add io_uring IO interface

Pull block layer updates from Jens Axboe:
 "Not a huge amount of changes in this round, the biggest one is that we
  finally have Mings multi-page bvec support merged. Apart from that,
  this pull request contains:

   - Small series that avoids quiescing the queue for sysfs changes that
     match what we currently have (Aleksei)

   - Series of bcache fixes (via Coly)

   - Series of lightnvm fixes (via Mathias)

   - NVMe pull request from Christoph. Nothing major, just SPDX/license
     cleanups, RR mp policy (Hannes), and little fixes (Bart,
     Chaitanya).

   - BFQ series (Paolo)

   - Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
     for the fast path (Jianchao)

   - fops->iopoll() added for async IO polling, this is a feature that
     the upcoming io_uring interface will use (Christoph, me)

   - Partition scan loop fixes (Dongli)

   - mtip32xx conversion from managed resource API (Christoph)

   - cdrom registration race fix (Guenter)

   - MD pull from Song, two minor fixes.

   - Various documentation fixes (Marcos)

   - Multi-page bvec feature. This brings a lot of nice improvements
     with it, like more efficient splitting, larger IOs can be supported
     without growing the bvec table size, and so on. (Ming)

   - Various little fixes to core and drivers"

* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
  block: fix updating bio's front segment size
  block: Replace function name in string with __func__
  nbd: propagate genlmsg_reply return code
  floppy: remove set but not used variable 'q'
  null_blk: fix checking for REQ_FUA
  block: fix NULL pointer dereference in register_disk
  fs: fix guard_bio_eod to check for real EOD errors
  blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
  block: optimize bvec iteration in bvec_iter_advance
  block: introduce mp_bvec_for_each_page() for iterating over page
  block: optimize blk_bio_segment_split for single-page bvec
  block: optimize __blk_segment_map_sg() for single-page bvec
  block: introduce bvec_nth_page()
  iomap: wire up the iopoll method
  block: add bio_set_polled() helper
  block: wire up block device iopoll method
  fs: add an iopoll method to struct file_operations
  loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
  loop: do not print warn message if partition scan is successful
  block: bounce: make sure that bvec table is updated
  ...