Pull drm fixes from Dave Airlie:
 "Regular weekly merge request, mostly amdgpu and misc bits in
  xe/etnaviv/gma500 and some core changes. Nothing too outlandish, seems
  to be about normal for this time of release.

  atomic-helpers:
   - Fix memory leak in drm_format_conv_state_copy()

  fbdev:
   - fbdefio: Fix address calculation

  amdgpu:
   - Suspend/resume fix
   - Don't expose gpu_od directory if it's empty
   - SDMA 4.4.2 fix
   - VPE fix
   - BO eviction fix
   - UMSCH fix
   - SMU 13.0.6 reset fixes
   - GPUVM flush accounting fix
   - SDMA 5.2 fix
   - Fix possible UAF in mes code

  amdkfd:
   - Eviction fence handling fix
   - Fix memory leak when GPU memory allocation fails
   - Fix dma-buf validation
   - Fix rescheduling of restore worker
   - SVM fix

  gma500:
   - Fix crash during boot

  etnaviv:
   - fix GC7000 TX clock gating
   - revert NPU UAPI changes

  xe:
   - Fix error paths on managed allocations
   - Fix PF/VF relay messages"

* tag 'drm-fixes-2024-04-26' of https://gitlab.freedesktop.org/drm/kernel: (23 commits)
  Revert "drm/etnaviv: Expose a few more chipspecs to userspace"
  drm/etnaviv: fix tx clock gating on some GC7000 variants
  drm/xe/guc: Fix arguments passed to relay G2H handlers
  drm/xe: call free_gsc_pkt only once on action add failure
  drm/xe: Remove sysfs only once on action add failure
  fbdev: fix incorrect address computation in deferred IO
  drm/amdgpu/mes: fix use-after-free issue
  drm/amdgpu/sdma5.2: use legacy HDP flush for SDMA2/3
  drm/amdgpu: Fix the ring buffer size for queue VM flush
  drm/amdkfd: Add VRAM accounting for SVM migration
  drm/amd/pm: Restore config space after reset
  drm/amdgpu/umsch: don't execute umsch test when GPU is in reset/suspend
  drm/amdkfd: Fix rescheduling of restore worker
  drm/amdgpu: Update BO eviction priorities
  drm/amdgpu/vpe: fix vpe dpm setup failed
  drm/amdgpu: Assign correct bits for SDMA HDP flush
  drm/amdgpu/pm: Remove gpu_od if it's an empty directory
  drm/amdkfd: make sure VM is ready for updating operations
  drm/amdgpu: Fix leak when GPU memory allocation fails
  drm/amdkfd: Fix eviction fence handling
  ...

- fix GC7000 TX clock gating
- revert NPU UAPI changes

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/c24457dc18ba9eab3ff919b398a25b1af9f1124e.camel@pengutronix.de

This reverts commit 1dccdba084897443d116508a8ed71e0ac8a031a4.

In userspace a different approach was choosen - hwdb. As a result, there
is no need for these values.

Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

This commit cleans up the uapi for vhost_vdpa by
better naming some of the enums which report blk
information to user space, and they are not
in any official releases yet.

Fixes: 1ac61ddfee93 ("vDPA: report virtio-blk flush info to user space")
Fixes: ae1374b7f72c ("vDPA: report virtio-block read-only info to user space")
Fixes: 330b8aea6924 ("vDPA: report virtio-block max segment size to user space")
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240415111047.1047774-1-lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

VDPA_GET_VRING_SIZE by mistake uses the already occupied
ioctl # 0x80 and we never noticed - it happens to work
because the direction and size are different, but confuses
tools such as perf which like to look at just the number,
and breaks the extra robustness of the ioctl numbering macros.

To fix, sort the entries and renumber the ioctl - not too late
since it wasn't in any released kernels yet.

Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 1496c47065f9 ("vhost-vdpa: uapi to support reporting per vq size")
Cc: "Zhu Lingshan" <lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <41c1c5489688abe5bfef9f7cf15584e3fb872ac5.1712092759.git.mst@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

Pull SCSI fixes and updates from James Bottomley:
 "Fully half this pull is updates to lpfc and qla2xxx which got
  committed just as the merge window opened. A sizeable fraction of the
  driver updates are simple bug fixes (and lock reworks for bug fixes in
  the case of lpfc), so rather than splitting the few actual
  enhancements out, we're just adding the drivers to the -rc1 pull.

  The enhancements for lpfc are log message removals, copyright updates
  and three patches redefining types. For qla2xxx it's just removing a
  debug message on module removal and the manufacturer detail update.

  The two major fixes are the sg teardown race and a core error leg
  problem with the procfs directory not being removed if we destroy a
  created host that never got to the running state. The rest are minor
  fixes and constifications"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
  scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
  scsi: core: Fix unremoved procfs host directory regression
  scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
  scsi: sd: Fix TCG OPAL unlock on system resume
  scsi: sg: Avoid sg device teardown race
  scsi: lpfc: Copyright updates for 14.4.0.1 patches
  scsi: lpfc: Update lpfc version to 14.4.0.1
  scsi: lpfc: Define types in a union for generic void *context3 ptr
  scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
  scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
  scsi: lpfc: Use a dedicated lock for ras_fwlog state
  scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
  scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
  scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
  scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
  scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
  scsi: lpfc: Remove unnecessary log message in queuecommand path
  scsi: qla2xxx: Update version to 10.02.09.200-k
  scsi: qla2xxx: Delay I/O Abort on PCI error
  scsi: qla2xxx: Change debug message during driver unload
  ...

Due to a CP interrupt bug, bad packet garbage exception codes are raised.
Do a range check so that the debugger and runtime do not receive garbage
codes.
Update the user api to guard exception code type checking as well.

Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Tested-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When the "storcli2 show" command is executed for eHBA-9600, mpi3mr driver
prints this WARNING message:

  memcpy: detected field-spanning write (size 128) of single field "bsg_reply_buf->reply_buf" at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 (size 1)
  WARNING: CPU: 0 PID: 12760 at drivers/scsi/mpi3mr/mpi3mr_app.c:1658 mpi3mr_bsg_request+0x6b12/0x7f10 [mpi3mr]

The cause of the WARN is 128 bytes memcpy to the 1 byte size array "__u8
replay_buf[1]" in the struct mpi3mr_bsg_in_reply_buf. The array is intended
to be a flexible length array, so the WARN is a false positive.

To suppress the WARN, remove the constant number '1' from the array
declaration and clarify that it has flexible length. Also, adjust the
memory allocation size to match the change.

Suggested-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240323084155.166835-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of TTY/Serial driver updates and cleanups for
  6.9-rc1. Included in here are:

   - more tty cleanups from Jiri

   - loads of 8250 driver cleanups from Andy

   - max310x driver updates

   - samsung serial driver updates

   - uart_prepare_sysrq_char() updates for many drivers

   - platform driver remove callback void cleanups

   - stm32 driver updates

   - other small tty/serial driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  dt-bindings: serial: stm32: add power-domains property
  serial: 8250_dw: Replace ACPI device check by a quirk
  serial: Lock console when calling into driver before registration
  serial: 8250_uniphier: Switch to use uart_read_port_properties()
  serial: 8250_tegra: Switch to use uart_read_port_properties()
  serial: 8250_pxa: Switch to use uart_read_port_properties()
  serial: 8250_omap: Switch to use uart_read_port_properties()
  serial: 8250_of: Switch to use uart_read_port_properties()
  serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
  serial: 8250_ingenic: Switch to use uart_read_port_properties()
  serial: 8250_dw: Switch to use uart_read_port_properties()
  serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
  serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
  serial: port: Introduce a common helper to read properties
  serial: core: Add UPIO_UNKNOWN constant for unknown port type
  serial: core: Move struct uart_port::quirks closer to possible values
  serial: sh-sci: Call sci_serial_{in,out}() directly
  serial: core: only stop transmit when HW fifo is empty
  serial: pch: Use uart_prepare_sysrq_char().
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
  of tiny changes and forward progress to support new hardware and
  better support for existing devices. Included in here are:

   - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
     people start to use the hardware

   - default USB authentication mode Kconfig and documentation update to
     make it more obvious what is going on

   - USB typec updates and enhancements

   - usual dwc3 driver updates

   - usual xhci driver updates

   - function USB (i.e. gadget) driver updates and additions

   - new device ids for lots of drivers

   - loads of other small updates, full details in the shortlog

  All of these, including a "last minute regression fix" have been in
  linux-next with no reported issues"

* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
  usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
  usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
  usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
  phy: tegra: xusb: Add API to retrieve the port number of phy
  USB: gadget: pxa27x_udc: Remove unused of_gpio.h
  usb: gadget/snps_udc_plat: Remove unused of_gpio.h
  usb: ohci-pxa27x: Remove unused of_gpio.h
  usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
  usb: Clarify expected behavior of dev_bin_attrs_are_visible()
  xhci: Allow RPM on the USB controller (1022:43f7) by default
  usb: isp1760: remove SLAB_MEM_SPREAD flag usage
  usb: misc: onboard_hub: use pointer consistently in the probe function
  usb: gadget: fsl: Increase size of name buffer for endpoints
  usb: gadget: fsl: Add of device table to enable module autoloading
  usb: typec: tcpm: add support to set tcpc connector orientatition
  usb: typec: tcpci: add generic tcpci fallback compatible
  dt-bindings: usb: typec-tcpci: add tcpci fallback binding
  usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
  usb: core: Set connect_type of ports based on DT node
  dt-bindings: usb: Add downstream facing ports to realtek binding
  ...