linux-toradex.git/include, branch kk4.4.2_1.0.0-beta

ENGR00303824 audio: Headphone hotplug not work in mx6sl_evk

2014-03-25T10:43:06+00:00

When hotplug, user will close and reopen the device, shutdown()
will be called, MCLK will be disabled, then I2C access to wm8962
will have issue. so the drive didn't switch to headphone.
Move the clk enable and disable to codec driver to fix this issue.

Signed-off-by: Shengjiu Wang

net: ipv6: Add IPv6 support to the ping socket.

2014-03-11T01:25:50+00:00

[backport of net-next 6d0bfe22611602f36617bc7aa2ffa1bbb2f54c67]

This adds the ability to send ICMPv6 echo requests without a
raw socket. The equivalent ability for ICMPv4 was added in
2011.

Instead of having separate code paths for IPv4 and IPv6, make
most of the code in net/ipv4/ping.c dual-stack and only add a
few IPv6-specific bits (like the protocol definition) to a new
net/ipv6/ping.c. Hopefully this will reduce divergence and/or
duplication of bugs in the future.

Caveats:

- Setting options via ancillary data (e.g., using IPV6_PKTINFO
  to specify the outgoing interface) is not yet supported.
- There are no separate security settings for IPv4 and IPv6;
  everything is controlled by /proc/net/ipv4/ping_group_range.
- The proc interface does not yet display IPv6 ping sockets
  properly.

Tested with a patched copy of ping6 and using raw socket calls.
Compiles and works with all of CONFIG_IPV6={n,m,y}.

Change-Id: Ia359af556021344fc7f890c21383aadf950b6498
Signed-off-by: Lorenzo Colitti 
Signed-off-by: David S. Miller 
[lorenzo@google.com: backported to 3.0]
Signed-off-by: Lorenzo Colitti

ipv6: introdcue __ipv6_addr_needs_scope_id and ipv6_iface_scope_id helper functions

2014-03-11T01:25:39+00:00

[net-next commit b7ef213ef65256168df83ddfbb8131ed9adc10f9]

__ipv6_addr_needs_scope_id checks if an ipv6 address needs to supply
a 'sin6_scope_id != 0'. 'sin6_scope_id != 0' was enforced in case
of link-local addresses. To support interface-local multicast these
checks had to be enhanced and are now consolidated into these new helper
functions.

v2:
a) migrated to struct ipv6_addr_props

v3:
a) reverted changes for ipv6_addr_props
b) test for address type instead of comparing scope

v4:
a) unchanged

Change-Id: Id6fc54cec61f967928e08a9eba4f857157d973a3
Suggested-by: YOSHIFUJI Hideaki 
Cc: YOSHIFUJI Hideaki 
Acked-by: YOSHIFUJI Hideaki 
Signed-off-by: Hannes Frederic Sowa 
Acked-by: YOSHIFUJI Hideaki 
Signed-off-by: David S. Miller

inet: limit length of fragment queue hash table bucket lists

2014-03-10T05:58:22+00:00

[ Upstream commit 5a3da1fe9561828d0ca7eca664b16ec2b9bf0055 ]

This patch introduces a constant limit of the fragment queue hash
table bucket list lengths. Currently the limit 128 is choosen somewhat
arbitrary and just ensures that we can fill up the fragment cache with
empty packets up to the default ip_frag_high_thresh limits. It should
just protect from list iteration eating considerable amounts of cpu.

If we reach the maximum length in one hash bucket a warning is printed.
This is implemented on the caller side of inet_frag_find to distinguish
between the different users of inet_fragment.c.

I dropped the out of memory warning in the ipv4 fragment lookup path,
because we already get a warning by the slab allocator.

Cc: Eric Dumazet 
Cc: Jesper Dangaard Brouer 
Signed-off-by: Hannes Frederic Sowa 
Acked-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

rtnetlink: Compute and store minimum ifinfo dump size

2014-03-10T05:57:53+00:00

commit c7ac8679bec9397afe8918f788cbcef88c38da54 upstream.

The message size allocated for rtnl ifinfo dumps was limited to
a single page.  This is not enough for additional interface info
available with devices that support SR-IOV and caused a bug in
which VF info would not be displayed if more than approximately
40 VFs were created per interface.

Implement a new function pointer for the rtnl_register service that will
calculate the amount of data required for the ifinfo dump and allocate
enough data to satisfy the request.

Signed-off-by: Greg Rose 
Signed-off-by: Jeff Kirsher 
Cc: Ben Hutchings 
Signed-off-by: Greg Kroah-Hartman

iosched: prevent aliased requests from starving other I/O

2014-03-04T02:08:23+00:00

Hi, Jens,

If you recall, I posted an RFC patch for this back in July of last year:
http://lkml.org/lkml/2010/7/13/279

The basic problem is that a process can issue a never-ending stream of
async direct I/Os to the same sector on a device, thus starving out
other I/O in the system (due to the way the alias handling works in both
cfq and deadline).  The solution I proposed back then was to start
dispatching from the fifo after a certain number of aliases had been
dispatched.  Vivek asked why we had to treat aliases differently at all,
and I never had a good answer.  So, I put together a simple patch which
allows aliases to be added to the rb tree (it adds them to the right,
though that doesn't matter as the order isn't guaranteed anyway).  I
think this is the preferred solution, as it doesn't break up time slices
in CFQ or batches in deadline.  I've tested it, and it does solve the
starvation issue.  Let me know what you think.

Cheers,
Jeff

Signed-off-by: Jeff Moyer 
Signed-off-by: Jens Axboe

ENGR00292372 Add consumer IR support in android 4.4

2013-12-19T04:17:06+00:00

Add IR char driver,mx6_ir driver,epit driver and update configuration
for support IR.

Signed-off-by: Ke Qinghua

ENGR00292598 Enable EPIT driver

2013-12-18T10:05:34+00:00

Add EPIT driver

Signed-off-by: Ke Qinghua

Merge remote-tracking branch 'fsl-linux-sdk/imx_3.0.35_4.1.0' into imx_3.0.35_android

2013-08-12T05:12:19+00:00

ENGR00273973-1 Revert "ENGR00270573-2 [MX6SL]Add support for dynamic Power Gati

2013-08-08T04:22:05+00:00

This reverts commit 881e21c1275dcc40ccd63fb4fa46b990eeb4fb00.

With the commit 881e21c1 and 7b60e285, the system will hang when do suspend
and resume stress test continuouly while run edpc test in the background.
Revert it now and revisit it later.

Signed-off-by: Robby Cai