linux-toradex.git/include, branch v3.14.18

svcrdma: Select NFSv4.1 backchannel transport based on forward channel

2014-09-05T23:34:18+00:00

commit 3c45ddf823d679a820adddd53b52c6699c9a05ac upstream.

The current code always selects XPRT_TRANSPORT_BC_TCP for the back
channel, even when the forward channel was not TCP (eg, RDMA). When
a 4.1 mount is attempted with RDMA, the server panics in the TCP BC
code when trying to send CB_NULL.

Instead, construct the transport protocol number from the forward
channel transport or'd with XPRT_TRANSPORT_BC. Transports that do
not support bi-directional RPC will not have registered a "BC"
transport, causing create_backchannel_client() to fail immediately.

Fixes: https://bugzilla.linux-nfs.org/show_bug.cgi?id=265
Signed-off-by: Chuck Lever 
Signed-off-by: J. Bruce Fields 
Signed-off-by: Greg Kroah-Hartman

jbd2: fix descriptor block size handling errors with journal_csum

2014-09-05T23:34:17+00:00

commit db9ee220361de03ee86388f9ea5e529eaad5323c upstream.

It turns out that there are some serious problems with the on-disk
format of journal checksum v2.  The foremost is that the function to
calculate descriptor tag size returns sizes that are too big.  This
causes alignment issues on some architectures and is compounded by the
fact that some parts of jbd2 use the structure size (incorrectly) to
determine the presence of a 64bit journal instead of checking the
feature flags.

Therefore, introduce journal checksum v3, which enlarges the
descriptor block tag format to allow for full 32-bit checksums of
journal blocks, fix the journal tag function to return the correct
sizes, and fix the jbd2 recovery code to use feature flags to
determine 64bitness.

Add a few function helpers so we don't have to open-code quite so
many pieces.

Switching to a 16-byte block size was found to increase journal size
overhead by a maximum of 0.1%, to convert a 32-bit journal with no
checksumming to a 32-bit journal with checksum v3 enabled.

Signed-off-by: Darrick J. Wong 
Reported-by: TR Reardon 
Signed-off-by: Theodore Ts'o 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: add additional SI pci ids

2014-09-05T23:34:15+00:00

commit 37dbeab788a8f23fd946c0be083e5484d6f929a1 upstream.

Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: add new bonaire pci ids

2014-09-05T23:34:15+00:00

commit 5fc540edc8ea1297c76685f74bc82a2107fe6731 upstream.

Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: add new KV pci id

2014-09-05T23:34:15+00:00

commit 6dc14baf4ced769017c7a7045019c7a19f373865 upstream.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=82912

Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

ip_tunnel(ipv4): fix tunnels with "local any remote $remote_ip"

2014-08-14T01:38:23+00:00

[ Upstream commit 95cb5745983c222867cc9ac593aebb2ad67d72c0 ]

Ipv4 tunnels created with "local any remote $ip" didn't work properly since
7d442fab0 (ipv4: Cache dst in tunnels). 99% of packets sent via those tunnels
had src addr = 0.0.0.0. That was because only dst_entry was cached, although
fl4.saddr has to be cached too. Every time ip_tunnel_xmit used cached dst_entry
(tunnel_rtable_get returned non-NULL), fl4.saddr was initialized with
tnl_params->saddr (= 0 in our case), and wasn't changed until iptunnel_xmit().

This patch adds saddr to ip_tunnel->dst_cache, fixing this issue.

Reported-by: Sergey Popov 
Signed-off-by: Dmitry Popov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

ip: make IP identifiers less predictable

2014-08-14T01:38:23+00:00

[ Upstream commit 04ca6973f7c1a0d8537f2d9906a0cf8e69886d75 ]

In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and
Jedidiah describe ways exploiting linux IP identifier generation to
infer whether two machines are exchanging packets.

With commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count"), we
changed IP id generation, but this does not really prevent this
side-channel technique.

This patch adds a random amount of perturbation so that IP identifiers
for a given destination [1] are no longer monotonically increasing after
an idle period.

Note that prandom_u32_max(1) returns 0, so if generator is used at most
once per jiffy, this patch inserts no hole in the ID suite and do not
increase collision probability.

This is jiffies based, so in the worst case (HZ=1000), the id can
rollover after ~65 seconds of idle time, which should be fine.

We also change the hash used in __ip_select_ident() to not only hash
on daddr, but also saddr and protocol, so that ICMP probes can not be
used to infer information for other protocols.

For IPv6, adds saddr into the hash as well, but not nexthdr.

If I ping the patched target, we can see ID are now hard to predict.

21:57:11.008086 IP (...)
    A > target: ICMP echo request, seq 1, length 64
21:57:11.010752 IP (... id 2081 ...)
    target > A: ICMP echo reply, seq 1, length 64

21:57:12.013133 IP (...)
    A > target: ICMP echo request, seq 2, length 64
21:57:12.015737 IP (... id 3039 ...)
    target > A: ICMP echo reply, seq 2, length 64

21:57:13.016580 IP (...)
    A > target: ICMP echo request, seq 3, length 64
21:57:13.019251 IP (... id 3437 ...)
    target > A: ICMP echo reply, seq 3, length 64

[1] TCP sessions uses a per flow ID generator not changed by this patch.

Signed-off-by: Eric Dumazet 
Reported-by: Jeffrey Knockel 
Reported-by: Jedidiah R. Crandall 
Cc: Willy Tarreau 
Cc: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

inetpeer: get rid of ip_id_count

2014-08-14T01:38:23+00:00

[ Upstream commit 73f156a6e8c1074ac6327e0abd1169e95eb66463 ]

Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.

Signed-off-by: Eric Dumazet 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

pinctrl: dra: dt-bindings: Fix pull enable/disable

2014-08-07T21:52:38+00:00

commit 23d9cec07c589276561c13b180577c0b87930140 upstream.

The DRA74/72 control module pins have a weak pull up and pull down.
This is configured by bit offset 17. if BIT(17) is 1, a pull up is
selected, else a pull down is selected.

However, this pull resisstor is applied based on BIT(16) -
PULLUDENABLE - if BIT(18) is *0*, then pull as defined in BIT(17) is
applied, else no weak pulls are applied. We defined this in reverse.

Reference: Table 18-5 (Description of the pad configuration register
bits) in Technical Reference Manual Revision (DRA74x revision Q:
SPRUHI2Q Revised June 2014 and DRA72x revision F: SPRUHP2F - Revised
June 2014)

Fixes: 6e58b8f1daaf1a ("ARM: dts: DRA7: Add the dts files for dra7 SoC and dra7-evm board")
Signed-off-by: Nishanth Menon 
Tested-by: Felipe Balbi 
Acked-by: Felipe Balbi 
Signed-off-by: Tony Lindgren 
Signed-off-by: Greg Kroah-Hartman

printk: rename printk_sched to printk_deferred

2014-08-07T21:52:37+00:00

commit aac74dc495456412c4130a1167ce4beb6c1f0b38 upstream.

After learning we'll need some sort of deferred printk functionality in
the timekeeping core, Peter suggested we rename the printk_sched function
so it can be reused by needed subsystems.

This only changes the function name. No logic changes.

Signed-off-by: John Stultz 
Reviewed-by: Steven Rostedt 
Cc: Jan Kara 
Cc: Peter Zijlstra 
Cc: Jiri Bohac 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman