linux-toradex.git/include, branch v3.17.1

USB: Add device quirk for ASUS T100 Base Station keyboard

2014-10-15T10:29:24+00:00

commit ddbe1fca0bcb87ca8c199ea873a456ca8a948567 upstream.

This full-speed USB device generates spurious remote wakeup event
as soon as USB_DEVICE_REMOTE_WAKEUP feature is set. As the result,
Linux can't enter system suspend and S0ix power saving modes once
this keyboard is used.

This patch tries to introduce USB_QUIRK_IGNORE_REMOTE_WAKEUP quirk.
With this quirk set, wakeup capability will be ignored during
device configure.

This patch could be back-ported to kernels as old as 2.6.39.

Signed-off-by: Lu Baolu 
Acked-by: Alan Stern 
Signed-off-by: Greg Kroah-Hartman

uas: Add no-report-opcodes quirk

2014-10-15T10:29:24+00:00

commit 734016b00b50a3c6a0e1fc1b7b217e783f5123a1 upstream.

Besides the ASM1051 (*) needing sdev->no_report_opcodes = 1, it turns out that
the JMicron JMS567 also needs it to work properly with uas (usb-storage always
sets it). Since some of the scsi devs were not to keen on the idea to
outrightly set sdev->no_report_opcodes = 1 for all uas devices, so add a quirk
for this, and set it for the JMS567.

*) Which has become a non-issue since we've completely blacklisted uas on
the ASM1051 for other reasons

Reported-and-tested-by: Claudio Bizzarri 
Signed-off-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

uas: Add a quirk for rejecting ATA_12 and ATA_16 commands

2014-10-15T10:29:23+00:00

commit 593078525c8b234a35a36ff551b8716464e86481 upstream.

And set this quirk for the Seagate Expansion Desk (0bc2:2312), as that one
seems to hang upon receiving an ATA_12 or ATA_16 command.

https://bugzilla.kernel.org/show_bug.cgi?id=79511
https://bbs.archlinux.org/viewtopic.php?id=183190

While at it also add missing documentation for the u value for usb-storage
quirks.

Signed-off-by: Hans de Goede 
Signed-off-by: Greg Kroah-Hartman

irq_work: Force raised irq work to run on irq work interrupt

2014-10-15T10:29:23+00:00

commit 76a33061b9323b7fdb220ae5fa116c10833ec22e upstream.

The nohz full kick, which restarts the tick when any resource depend
on it, can't be executed anywhere given the operation it does on timers.
If it is called from the scheduler or timers code, chances are that
we run into a deadlock.

This is why we run the nohz full kick from an irq work. That way we make
sure that the kick runs on a virgin context.

However if that's the case when irq work runs in its own dedicated
self-ipi, things are different for the big bunch of archs that don't
support the self triggered way. In order to support them, irq works are
also handled by the timer interrupt as fallback.

Now when irq works run on the timer interrupt, the context isn't blank.
More precisely, they can run in the context of the hrtimer that runs the
tick. But the nohz kick cancels and restarts this hrtimer and cancelling
an hrtimer from itself isn't allowed. This is why we run in an endless
loop:

	Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 2
	CPU: 2 PID: 7538 Comm: kworker/u8:8 Not tainted 3.16.0+ #34
	Workqueue: btrfs-endio-write normal_work_helper [btrfs]
	 ffff880244c06c88 000000001b486fe1 ffff880244c06bf0 ffffffff8a7f1e37
	 ffffffff8ac52a18 ffff880244c06c78 ffffffff8a7ef928 0000000000000010
	 ffff880244c06c88 ffff880244c06c20 000000001b486fe1 0000000000000000
	Call Trace:
	 ] dump_stack+0x4e/0x7a
	 [] panic+0xd4/0x207
	 [] watchdog_overflow_callback+0x118/0x120
	 [] __perf_event_overflow+0xae/0x350
	 [] ? perf_event_task_disable+0xa0/0xa0
	 [] ? x86_perf_event_set_period+0xbf/0x150
	 [] perf_event_overflow+0x14/0x20
	 [] intel_pmu_handle_irq+0x206/0x410
	 [] perf_event_nmi_handler+0x2b/0x50
	 [] nmi_handle+0xd2/0x390
	 [] ? nmi_handle+0x5/0x390
	 [] ? match_held_lock+0x8/0x1b0
	 [] default_do_nmi+0x72/0x1c0
	 [] do_nmi+0xb8/0x100
	 [] end_repeat_nmi+0x1e/0x2e
	 [] ? match_held_lock+0x8/0x1b0
	 [] ? match_held_lock+0x8/0x1b0
	 [] ? match_held_lock+0x8/0x1b0
	 <] lock_acquired+0xaf/0x450
	 [] ? lock_hrtimer_base.isra.20+0x25/0x50
	 [] _raw_spin_lock_irqsave+0x78/0x90
	 [] ? lock_hrtimer_base.isra.20+0x25/0x50
	 [] lock_hrtimer_base.isra.20+0x25/0x50
	 [] hrtimer_try_to_cancel+0x33/0x1e0
	 [] hrtimer_cancel+0x1a/0x30
	 [] tick_nohz_restart+0x17/0x90
	 [] __tick_nohz_full_check+0xc3/0x100
	 [] nohz_full_kick_work_func+0xe/0x10
	 [] irq_work_run_list+0x44/0x70
	 [] irq_work_run+0x2a/0x50
	 [] update_process_times+0x5b/0x70
	 [] tick_sched_handle.isra.21+0x25/0x60
	 [] tick_sched_timer+0x41/0x60
	 [] __run_hrtimer+0x72/0x470
	 [] ? tick_sched_do_timer+0xb0/0xb0
	 [] hrtimer_interrupt+0x117/0x270
	 [] local_apic_timer_interrupt+0x37/0x60
	 [] smp_apic_timer_interrupt+0x3f/0x50
	 [] apic_timer_interrupt+0x6f/0x80

To fix this we force non-lazy irq works to run on irq work self-IPIs
when available. That ability of the arch to trigger irq work self IPIs
is available with arch_irq_work_has_interrupt().

Reported-by: Catalin Iacob 
Reported-by: Dave Jones 
Acked-by: Peter Zijlstra (Intel) 
Cc: Ingo Molnar 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Signed-off-by: Frederic Weisbecker 
Signed-off-by: Greg Kroah-Hartman

irq_work: Introduce arch_irq_work_has_interrupt()

2014-10-15T10:29:23+00:00

commit c5c38ef3d70377dc504a6a3f611a3ec814bc757b upstream.

The nohz full code needs irq work to trigger its own interrupt so that
the subsystem can work even when the tick is stopped.

Lets introduce arch_irq_work_has_interrupt() that archs can override to
tell about their support for this ability.

Signed-off-by: Peter Zijlstra 
Cc: Ingo Molnar 
Cc: Paul E. McKenney 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Signed-off-by: Frederic Weisbecker 
Signed-off-by: Greg Kroah-Hartman

sctp: handle association restarts when the socket is closed.

2014-10-15T10:29:23+00:00

[ Upstream commit bdf6fa52f01b941d4a80372d56de465bdbbd1d23 ]

Currently association restarts do not take into consideration the
state of the socket.  When a restart happens, the current assocation
simply transitions into established state.  This creates a condition
where a remote system, through a the restart procedure, may create a
local association that is no way reachable by user.  The conditions
to trigger this are as follows:
  1) Remote does not acknoledge some data causing data to remain
     outstanding.
  2) Local application calls close() on the socket.  Since data
     is still outstanding, the association is placed in SHUTDOWN_PENDING
     state.  However, the socket is closed.
  3) The remote tries to create a new association, triggering a restart
     on the local system.  The association moves from SHUTDOWN_PENDING
     to ESTABLISHED.  At this point, it is no longer reachable by
     any socket on the local system.

This patch addresses the above situation by moving the newly ESTABLISHED
association into SHUTDOWN-SENT state and bundling a SHUTDOWN after
the COOKIE-ACK chunk.  This way, the restarted associate immidiately
enters the shutdown procedure and forces the termination of the
unreachable association.

Reported-by: David Laight 
Signed-off-by: Vlad Yasevich 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-10-02T04:29:06+00:00

Pull networking fixes from David Miller:

 1) Don't halt the firmware in r8152 driver, from Hayes Wang.

 2) Handle full sized 802.1ad frames in bnx2 and tg3 drivers properly,
    from Vlad Yasevich.

 3) Don't sleep while holding tx_clean_lock in netxen driver, fix from
    Manish Chopra.

 4) Certain kinds of ipv6 routes can end up endlessly failing the route
    validation test, causing it to be re-looked up over and over again.
    This particularly kills input route caching in TCP sockets.  Fix
    from Hannes Frederic Sowa.

 5) netvsc_start_xmit() has a use-after-free access to skb->len, fix
    from K Y Srinivasan.

 6) Fix matching of inverted containers in ematch module, from Ignacy
    Gawędzki.

 7) Aggregation of GRO frames via SKB ->frag_list for linear skbs isn't
    handled properly, regression fix from Eric Dumazet.

 8) Don't test return value of ipv4_neigh_lookup(), which returns an
    error pointer, against NULL.  From WANG Cong.

 9) Fix an old regression where we mistakenly allow a double add of the
    same tunnel.  Fixes from Steffen Klassert.

10) macvtap device delete and open can run in parallel and corrupt lists
    etc., fix from Vlad Yasevich.

11) Fix build error with IPV6=m NETFILTER_XT_TARGET_TPROXY=y, from Pablo
    Neira Ayuso.

12) rhashtable_destroy() triggers lockdep splats, fix also from Pablo.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits)
  bna: Update Maintainer Email
  r8152: disable power cut for RTL8153
  r8152: remove clearing bp
  bnx2: Correctly receive full sized 802.1ad fragmes
  tg3: Allow for recieve of full-size 8021AD frames
  r8152: fix setting RTL8152_UNPLUG
  netxen: Fix bug in Tx completion path.
  netxen: Fix BUG "sleeping function called from invalid context"
  ipv6: remove rt6i_genid
  hyperv: Fix a bug in netvsc_start_xmit()
  net: stmmac: fix stmmac_pci_probe failed when CONFIG_HAVE_CLK is selected
  ematch: Fix matching of inverted containers.
  gro: fix aggregation for skb using frag_list
  neigh: check error pointer instead of NULL for ipv4_neigh_lookup()
  ip6_gre: Return an error when adding an existing tunnel.
  ip6_vti: Return an error when adding an existing tunnel.
  ip6_tunnel: Return an error when adding an existing tunnel.
  ip6gre: add a rtnl link alias for ip6gretap
  net/mlx4_core: Allow not to specify probe_vf in SRIOV IB mode
  r8152: fix the carrier off when autoresuming
  ...

ipv6: remove rt6i_genid

2014-09-30T18:00:48+00:00

Eric Dumazet noticed that all no-nonexthop or no-gateway routes which
are already marked DST_HOST (e.g. input routes routes) will always be
invalidated during sk_dst_check. Thus per-socket dst caching absolutely
had no effect and early demuxing had no effect.

Thus this patch removes rt6i_genid: fn_sernum already gets modified during
add operations, so we only must ensure we mutate fn_sernum during ipv6
address remove operations. This is a fairly cost extensive operations,
but address removal should not happen that often. Also our mtu update
functions do the same and we heard no complains so far. xfrm policy
changes also cause a call into fib6_flush_trees. Also plug a hole in
rt6_info (no cacheline changes).

I verified via tracing that this change has effect.

Cc: Eric Dumazet 
Cc: YOSHIFUJI Hideaki 
Cc: Vlad Yasevich 
Cc: Nicolas Dichtel 
Cc: Martin Lau 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2014-09-28T00:05:14+00:00

Pull vfs fixes from Al Viro:
 "Assorted fixes + unifying __d_move() and __d_materialise_dentry() +
  minimal regression fix for d_path() of victims of overwriting rename()
  ported on top of that"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: Don't exchange "short" filenames unconditionally.
  fold swapping ->d_name.hash into switch_names()
  fold unlocking the children into dentry_unlock_parents_for_move()
  kill __d_materialise_dentry()
  __d_materialise_dentry(): flip the order of arguments
  __d_move(): fold manipulations with ->d_child/->d_subdirs
  don't open-code d_rehash() in d_materialise_unique()
  pull rehashing and unlocking the target dentry into __d_materialise_dentry()
  ufs: deal with nfsd/iget races
  fuse: honour max_read and max_write in direct_io mode
  shmem: fix nlink for rename overwrite directory

Merge branch 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup

2014-09-27T23:45:33+00:00

Pull cgroup fixes from Tejun Heo:
 "This is quite late but these need to be backported anyway.

  This is the fix for a long-standing cpuset bug which existed from
  2009.  cpuset makes use of PF_SPREAD_{PAGE|SLAB} flags to modify the
  task's memory allocation behavior according to the settings of the
  cpuset it belongs to; unfortunately, when those flags have to be
  changed, cpuset did so directly even whlie the target task is running,
  which is obviously racy as task->flags may be modified by the task
  itself at any time.  This obscure bug manifested as corrupt
  PF_USED_MATH flag leading to a weird crash.

  The bug is fixed by moving the flag to task->atomic_flags.  The first
  two are prepatory ones to help defining atomic_flags accessors and the
  third one is the actual fix"

* 'for-3.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: PF_SPREAD_PAGE and PF_SPREAD_SLAB should be atomic flags
  sched: add macros to define bitops for task atomic flags
  sched: fix confusing PFA_NO_NEW_PRIVS constant