linux-toradex.git/include, branch v3.2.8

crypto: sha512 - use standard ror64()

2012-02-20T20:46:20+00:00

commit f2ea0f5f04c97b48c88edccba52b0682fbe45087 upstream.

Use standard ror64() instead of hand-written.
There is no standard ror64, so create it.

The difference is shift value being "unsigned int" instead of uint64_t
(for which there is no reason). gcc starts to emit native ROR instructions
which it doesn't do for some reason currently. This should make the code
faster.

Patch survives in-tree crypto test and ping flood with hmac(sha512) on.

Signed-off-by: Alexey Dobriyan 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

mmc: dw_mmc: Fix PIO mode with support of highmem

2012-02-20T20:46:20+00:00

commit f9c2a0dc42a6938ff2a80e55ca2bbd1d5581c72e upstream.

Current PIO mode makes a kernel crash with CONFIG_HIGHMEM.
Highmem pages have a NULL from sg_virt(sg).
This patch fixes the following problem.

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
[00000000] *pgd=00000000
Internal error: Oops: 817 [#1] PREEMPT SMP
Modules linked in:
CPU: 0    Not tainted  (3.0.15-01423-gdbf465f #589)
PC is at dw_mci_pull_data32+0x4c/0x9c
LR is at dw_mci_read_data_pio+0x54/0x1f0
pc : []    lr : []    psr: 20000193
sp : c0619d48  ip : c0619d70  fp : c0619d6c
r10: 00000000  r9 : 00000002  r8 : 00001000
r7 : 00000200  r6 : 00000000  r5 : e1dd3100  r4 : 00000000
r3 : 65622023  r2 : 0000007f  r1 : eeb96000  r0 : e1dd3100
Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment
xkernel
Control: 10c5387d  Table: 61e2004a  DAC: 00000015
Process swapper (pid: 0, stack limit = 0xc06182f0)
Stack: (0xc0619d48 to 0xc061a000)
9d40:                   e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200
9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100
9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8
9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154
9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900
9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08
9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c
9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000
9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68
9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68
9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8
9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff
9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4
9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44
9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4
9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48
9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc
9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8
9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714
9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000
9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a
9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000
Backtrace:
[] (dw_mci_pull_data32+0x0/0x9c) from [] (dw_mci_read_data_pio+0x54/0x1f0)
 r6:00000200 r5:e1a4f000 r4:e1dd3100
 [] (dw_mci_read_data_pio+0x0/0x1f0) from [] (dw_mci_interrupt+0xfc/0x4a4)
[] (dw_mci_interrupt+0x0/0x4a4) from [] (handle_irq_event_percpu+0x7c/0x1b4)
[] (handle_irq_event_percpu+0x0/0x1b4) from [] (handle_irq_event+0x44/0x64)
[] (handle_irq_event+0x0/0x64) from [] (handle_fasteoi_irq+0xb4/0x124)
 r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780
 [] (handle_fasteoi_irq+0x0/0x124) from [] (generic_handle_irq+0x30/0x38)
 r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d
 [] (generic_handle_irq+0x0/0x38) from [] (asm_do_IRQ+0x64/0xe0)
 r5:ffffee38 r4:c00423ac
 [] (asm_do_IRQ+0x0/0xe0) from [] (__irq_svc+0x80/0x14c)
Exception stack(0xc0619ed0 to 0xc0619f18)

Signed-off-by: Seungwon Jeon 
Acked-by: Will Newton 
Signed-off-by: Chris Ball 
Signed-off-by: Greg Kroah-Hartman

writeback: fix dereferencing NULL bdi->dev on trace_writeback_queue

2012-02-20T20:46:17+00:00

commit 977b7e3a52a7421ad33a393a38ece59f3d41c2fa upstream.

When a SD card is hot removed without umount, del_gendisk() will call
bdi_unregister() without destroying/freeing it. This leaves the bdi in
the bdi->dev = NULL, bdi->wb.task = NULL, bdi->bdi_list removed state.

When sync(2) gets the bdi before bdi_unregister() and calls
bdi_queue_work() after the unregister, trace_writeback_queue will be
dereferencing the NULL bdi->dev. Fix it with a simple test for NULL.

LKML-reference: http://lkml.org/lkml/2012/1/18/346
Reported-by: Rabin Vincent 
Tested-by: Namjae Jeon 
Signed-off-by: Wu Fengguang 
Signed-off-by: Greg Kroah-Hartman

writeback: fix NULL bdi->dev in trace writeback_single_inode

2012-02-20T20:46:16+00:00

commit 15eb77a07c714ac80201abd0a9568888bcee6276 upstream.

bdi_prune_sb() resets sb->s_bdi to default_backing_dev_info when the
tearing down the original bdi. Fix trace_writeback_single_inode to
use sb->s_bdi=default_backing_dev_info rather than bdi->dev=NULL for a
teared down bdi.

Reported-by: Rabin Vincent 
Tested-by: Rabin Vincent 
Signed-off-by: Wu Fengguang 
Signed-off-by: Greg Kroah-Hartman

lib: proportion: lower PROP_MAX_SHIFT to 32 on 64-bit kernel

2012-02-20T20:46:16+00:00

commit 3310225dfc71a35a2cc9340c15c0e08b14b3c754 upstream.

PROP_MAX_SHIFT should be set to <=32 on 64-bit box. This fixes two bugs
in the below lines of bdi_dirty_limit():

	bdi_dirty *= numerator;
	do_div(bdi_dirty, denominator);

1) divide error: do_div() only uses the lower 32 bit of the denominator,
   which may trimmed to be 0 when PROP_MAX_SHIFT > 32.

2) overflow: (bdi_dirty * numerator) could easily overflow if numerator
   used up to 48 bits, leaving only 16 bits to bdi_dirty

Cc: Peter Zijlstra 
Reported-by: Ilya Tumaykin 
Tested-by: Ilya Tumaykin 
Signed-off-by: Wu Fengguang 
Signed-off-by: Greg Kroah-Hartman

usb: ch9.h: usb_endpoint_maxp() uses __le16_to_cpu()

2012-02-13T19:17:03+00:00

commit 9c0a835a9d9aed41bcf9c287f5069133a6e2a87b upstream.

The usb/ch9.h will be installed to /usr/include/linux,
and be used from user space.
But le16_to_cpu() is only defined for kernel code.
Without this patch, user space compile will be broken.
Special thanks to Stefan Becker

Reported-by: Stefan Becker 
Signed-off-by: Kuninori Morimoto 
Signed-off-by: Felipe Balbi 
Signed-off-by: Greg Kroah-Hartman

PM / QoS: CPU C-state breakage with PM Qos change

2012-02-13T19:16:55+00:00

commit d020283dc694c9ec31b410f522252f7a8397e67d upstream.

Looks like change "PM QoS: Move and rename the implementation files"
merged during the 3.2 development cycle made PM QoS depend on
CONFIG_PM which depends on (PM_SLEEP || PM_RUNTIME).

That breaks CPU C-states with kernels not having these CONFIGs, causing CPUs
to spend time in Polling loop idle instead of going into deep C-states,
consuming way way more power. This is with either acpi idle or intel idle
enabled.

Either CONFIG_PM should be enabled with any pm_qos users or
the !CONFIG_PM pm_qos_request() should return sane defaults not to break
the existing users. Here's is the patch for the latter option.

[rjw: Modified the changelog slightly.]

Signed-off-by: Venkatesh Pallipadi 
Signed-off-by: Rafael J. Wysocki 
Signed-off-by: Greg Kroah-Hartman

PM / Hibernate: Fix s2disk regression related to freezing workqueues

2012-02-13T19:16:55+00:00

commit 181e9bdef37bfcaa41f3ab6c948a2a0d60a268b5 upstream.

Commit 2aede851ddf08666f68ffc17be446420e9d2a056

  PM / Hibernate: Freeze kernel threads after preallocating memory

introduced a mechanism by which kernel threads were frozen after
the preallocation of hibernate image memory to avoid problems with
frozen kernel threads not responding to memory freeing requests.
However, it overlooked the s2disk code path in which the
SNAPSHOT_CREATE_IMAGE ioctl was run directly after SNAPSHOT_FREE,
which caused freeze_workqueues_begin() to BUG(), because it saw
that worqueues had been already frozen.

Although in principle this issue might be addressed by removing
the relevant BUG_ON() from freeze_workqueues_begin(), that would
reintroduce the very problem that commit 2aede851ddf08666f68ffc17be4
attempted to avoid into that particular code path.  For this reason,
to fix the issue at hand, introduce thaw_kernel_threads() and make
the SNAPSHOT_FREE ioctl execute it.

Special thanks to Srivatsa S. Bhat for detailed analysis of the
problem.

Reported-and-tested-by: Jiri Slaby 
Signed-off-by: Rafael J. Wysocki 
Acked-by: Srivatsa S. Bhat 
Signed-off-by: Greg Kroah-Hartman

PCI: Rework ASPM disable code

2012-02-06T17:41:06+00:00

commit 3c076351c4027a56d5005a39a0b518a4ba393ce2 upstream.

Right now we forcibly clear ASPM state on all devices if the BIOS indicates
that the feature isn't supported. Based on the Microsoft presentation
"PCI Express In Depth for Windows Vista and Beyond", I'm starting to think
that this may be an error. The implication is that unless the platform
grants full control via _OSC, Windows will not touch any PCIe features -
including ASPM. In that case clearing ASPM state would be an error unless
the platform has granted us that control.

This patch reworks the ASPM disabling code such that the actual clearing
of state is triggered by a successful handoff of PCIe control to the OS.
The general ASPM code undergoes some changes in order to ensure that the
ability to clear the bits isn't overridden by ASPM having already been
disabled. Further, this theoretically now allows for situations where
only a subset of PCIe roots hand over control, leaving the others in the
BIOS state.

It's difficult to know for sure that this is the right thing to do -
there's zero public documentation on the interaction between all of these
components. But enough vendors enable ASPM on platforms and then set this
bit that it seems likely that they're expecting the OS to leave them alone.

Measured to save around 5W on an idle Thinkpad X220.

Signed-off-by: Matthew Garrett 
Signed-off-by: Jesse Barnes 
Signed-off-by: Greg Kroah-Hartman

netns: Fail conspicously if someone uses net_generic at an inappropriate time.

2012-02-03T17:22:18+00:00

[ Upstream commit 5ee4433efe99b9f39f6eff5052a177bbcfe72cea ]

By definition net_generic should never be called when it can return
NULL.  Fail conspicously with a BUG_ON to make it clear when people mess
up that a NULL return should never happen.

Recently there was a bug in the CAIF subsystem where it was registered
with register_pernet_device instead of register_pernet_subsys.  It was
erroneously concluded that net_generic could validly return NULL and
that net_assign_generic was buggy (when it was just inefficient).
Hopefully this BUG_ON will prevent people to coming to similar erroneous
conclusions in the futrue.

Signed-off-by: Eric W. Biederman 
Tested-by: Sasha Levin 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman