linux-toradex.git/include, branch v3.4.77

vlan: Fix header ops passthru when doing TX VLAN offload.

2014-01-15T23:27:11+00:00

[ Upstream commit 2205369a314e12fcec4781cc73ac9c08fc2b47de ]

When the vlan code detects that the real device can do TX VLAN offloads
in hardware, it tries to arrange for the real device's header_ops to
be invoked directly.

But it does so illegally, by simply hooking the real device's
header_ops up to the VLAN device.

This doesn't work because we will end up invoking a set of header_ops
routines which expect a device type which matches the real device, but
will see a VLAN device instead.

Fix this by providing a pass-thru set of header_ops which will arrange
to pass the proper real device instead.

To facilitate this add a dev_rebuild_header().  There are
implementations which provide a ->cache and ->create but not a
->rebuild (f.e. PLIP).  So we need a helper function just like
dev_hard_header() to avoid crashes.

Use this helper in the one existing place where the
header_ops->rebuild was being invoked, the neighbour code.

With lots of help from Florian Westphal.

Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: unix: allow set_peek_off to fail

2014-01-15T23:27:11+00:00

[ Upstream commit 12663bfc97c8b3fdb292428105dd92d563164050 ]

unix_dgram_recvmsg() will hold the readlock of the socket until recv
is complete.

In the same time, we may try to setsockopt(SO_PEEK_OFF) which will hang until
unix_dgram_recvmsg() will complete (which can take a while) without allowing
us to break out of it, triggering a hung task spew.

Instead, allow set_peek_off to fail, this way userspace will not hang.

Signed-off-by: Sasha Levin 
Acked-by: Pavel Emelyanov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

drm/radeon: 0x9649 is SUMO2 not SUMO

2014-01-08T17:42:11+00:00

commit d00adcc8ae9e22eca9d8af5f66c59ad9a74c90ec upstream.

Fixes rendering corruption due to incorrect
gfx configuration.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=63599

Signed-off-by: Alex Deucher 
Signed-off-by: Greg Kroah-Hartman

ALSA: memalloc.h - fix wrong truncation of dma_addr_t

2013-12-20T15:34:19+00:00

commit 932e9dec380c67ec15ac3eb073bb55797d8b4801 upstream.

When running a 32bit kernel the hda_intel driver is still reporting
a 64bit dma_mask if the HW supports it.

From sound/pci/hda/hda_intel.c:

        /* allow 64bit DMA address if supported by H/W */
        if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
                pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
        else {
                pci_set_dma_mask(pci, DMA_BIT_MASK(32));
                pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
        }

which means when there is a call to dma_alloc_coherent from
snd_malloc_dev_pages a machine address bigger than 32bit can be returned.
This can be true in particular if running  the 32bit kernel as a pv dom0
under the Xen Hypervisor or PAE on bare metal.

The problem is that when calling setup_bdle to program the BLE the
dma_addr_t returned from the dma_alloc_coherent is wrongly truncated
from snd_sgbuf_get_addr if running a 32bit kernel:

static inline dma_addr_t snd_sgbuf_get_addr(struct snd_dma_buffer *dmab,
                                           size_t offset)
{
        struct snd_sg_buf *sgbuf = dmab->private_data;
        dma_addr_t addr = sgbuf->table[offset >> PAGE_SHIFT].addr;
        addr &= PAGE_MASK;
        return addr + offset % PAGE_SIZE;
}

where PAGE_MASK in a 32bit kernel is zeroing the upper 32bit af addr.

Without this patch the HW will fetch the 32bit truncated address,
which is not the one obtained from dma_alloc_coherent and will result
to a non working audio but can corrupt host memory at a random location.

The current patch apply to v3.13-rc3-74-g6c843f5

Signed-off-by: Stefano Panella 
Reviewed-by: Frediano Ziglio 
Signed-off-by: Takashi Iwai 
Signed-off-by: Greg Kroah-Hartman

crypto: scatterwalk - Use sg_chain_ptr on chain entries

2013-12-12T06:34:12+00:00

commit 389a5390583a18e45bc4abd4439291abec5e7a63 upstream.

Now that scatterwalk_sg_chain sets the chain pointer bit the sg_page
call in scatterwalk_sg_next hits a BUG_ON when CONFIG_DEBUG_SG is
enabled. Use sg_chain_ptr instead of sg_page on a chain entry.

Signed-off-by: Tom Lendacky 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

crypto: scatterwalk - Set the chain pointer indication bit

2013-12-12T06:34:10+00:00

commit 41da8b5adba77e22584f8b45f9641504fa885308 upstream.

The scatterwalk_crypto_chain function invokes the scatterwalk_sg_chain
function to chain two scatterlists, but the chain pointer indication
bit is not set.  When the resulting scatterlist is used, for example,
by sg_nents to count the number of scatterlist entries, a segfault occurs
because sg_nents does not follow the chain pointer to the chained scatterlist.

Update scatterwalk_sg_chain to set the chain pointer indication bit as is
done by the sg_chain function.

Signed-off-by: Tom Lendacky 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

dm: fix truncated status strings

2013-12-08T15:29:43+00:00

commit fd7c092e711ebab55b2688d3859d95dfd0301f73 upstream.

Avoid returning a truncated table or status string instead of setting
the DM_BUFFER_FULL_FLAG when the last target of a table fills the
buffer.

When processing a table or status request, the function retrieve_status
calls ti->type->status. If ti->type->status returns non-zero,
retrieve_status assumes that the buffer overflowed and sets
DM_BUFFER_FULL_FLAG.

However, targets don't return non-zero values from their status method
on overflow. Most targets returns always zero.

If a buffer overflow happens in a target that is not the last in the
table, it gets noticed during the next iteration of the loop in
retrieve_status; but if a buffer overflow happens in the last target, it
goes unnoticed and erroneously truncated data is returned.

In the current code, the targets behave in the following way:
* dm-crypt returns -ENOMEM if there is not enough space to store the
  key, but it returns 0 on all other overflows.
* dm-thin returns errors from the status method if a disk error happened.
  This is incorrect because retrieve_status doesn't check the error
  code, it assumes that all non-zero values mean buffer overflow.
* all the other targets always return 0.

This patch changes the ti->type->status function to return void (because
most targets don't use the return code). Overflow is detected in
retrieve_status: if the status method fills up the remaining space
completely, it is assumed that buffer overflow happened.

Signed-off-by: Mikulas Patocka 
Signed-off-by: Alasdair G Kergon 
Signed-off-by: Greg Kroah-Hartman

inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions

2013-12-08T15:29:42+00:00

[ Upstream commit 85fbaa75037d0b6b786ff18658ddf0b4014ce2a4 ]

Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage
of uninitialized memory to user in recv syscalls") conditionally updated
addr_len if the msg_name is written to. The recv_error and rxpmtu
functions relied on the recvmsg functions to set up addr_len before.

As this does not happen any more we have to pass addr_len to those
functions as well and set it to the size of the corresponding sockaddr
length.

This broke traceroute and such.

Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")
Reported-by: Brad Spengler 
Reported-by: Tom Labanowski
Cc: mpb 
Cc: David S. Miller 
Cc: Eric Dumazet 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: rework recvmsg handler msg_name and msg_namelen logic

2013-12-08T15:29:41+00:00

[ Upstream commit f3d3342602f8bcbf37d7c46641cb9bca7618eb1c ]

This patch now always passes msg->msg_namelen as 0. recvmsg handlers must
set msg_namelen to the proper size <= sizeof(struct sockaddr_storage)
to return msg_name to the user.

This prevents numerous uninitialized memory leaks we had in the
recvmsg handlers and makes it harder for new code to accidentally leak
uninitialized memory.

Optimize for the case recvfrom is called with NULL as address. We don't
need to copy the address at all, so set it to NULL before invoking the
recvmsg handler. We can do so, because all the recvmsg handlers must
cope with the case a plain read() is called on them. read() also sets
msg_name to NULL.

Also document these changes in include/linux/net.h as suggested by David
Miller.

Changes since RFC:

Set msg->msg_name = NULL if user specified a NULL in msg_name but had a
non-null msg_namelen in verify_iovec/verify_compat_iovec. This doesn't
affect sendto as it would bail out earlier while trying to copy-in the
address. It also more naturally reflects the logic by the callers of
verify_iovec.

With this change in place I could remove "
if (!uaddr || msg_sys->msg_namelen == 0)
	msg->msg_name = NULL
".

This change does not alter the user visible error logic as we ignore
msg_namelen as long as msg_name is NULL.

Also remove two unnecessary curly brackets in ___sys_recvmsg and change
comments to netdev style.

Cc: David Miller 
Suggested-by: Eric Dumazet 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

random32: fix off-by-one in seeding requirement

2013-12-08T15:29:41+00:00

[ Upstream commit 51c37a70aaa3f95773af560e6db3073520513912 ]

For properly initialising the Tausworthe generator [1], we have
a strict seeding requirement, that is, s1 > 1, s2 > 7, s3 > 15.

Commit 697f8d0348 ("random32: seeding improvement") introduced
a __seed() function that imposes boundary checks proposed by the
errata paper [2] to properly ensure above conditions.

However, we're off by one, as the function is implemented as:
"return (x < m) ? x + m : x;", and called with __seed(X, 1),
__seed(X, 7), __seed(X, 15). Thus, an unwanted seed of 1, 7, 15
would be possible, whereas the lower boundary should actually
be of at least 2, 8, 16, just as GSL does. Fix this, as otherwise
an initialization with an unwanted seed could have the effect
that Tausworthe's PRNG properties cannot not be ensured.

Note that this PRNG is *not* used for cryptography in the kernel.

 [1] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme.ps
 [2] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme2.ps

Joint work with Hannes Frederic Sowa.

Fixes: 697f8d0348a6 ("random32: seeding improvement")
Cc: Stephen Hemminger 
Cc: Florian Weimer 
Cc: Theodore Ts'o 
Signed-off-by: Daniel Borkmann 
Signed-off-by: Hannes Frederic Sowa 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman