linux-toradex.git/include, branch v4.9.27

net: phy: fix auto-negotiation stall due to unavailable interrupt

2017-05-03T15:36:37+00:00

[ Upstream commit f555f34fdc586a56204cd16d9a7c104ec6cb6650 ]

The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet
cable was plugged before the Ethernet interface was brought up.

The patch trigger PHY state machine to update link state if PHY was requested to
do auto-negotiation and auto-negotiation complete flag already set.

During power-up cycle the PHY do auto-negotiation, generate interrupt and set
auto-negotiation complete flag. Interrupt is handled by PHY state machine but
doesn't update link state because PHY is in PHY_READY state. After some time
MAC bring up, start and request PHY to do auto-negotiation. If there are no new
settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation.
PHY continue to stay in auto-negotiation complete state and doesn't fire
interrupt. At the same time PHY state machine expect that PHY started
auto-negotiation and is waiting for interrupt from PHY and it won't get it.

Fixes: 321beec5047a ("net: phy: Use interrupts when available in NOLINK state")
Signed-off-by: Alexander Kochetkov 
Cc: stable  # v4.9+
Tested-by: Roger Quadros 
Tested-by: Alexandre Belloni 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

net: ipv6: RTF_PCPU should not be settable from userspace

2017-05-03T15:36:36+00:00

[ Upstream commit 557c44be917c322860665be3d28376afa84aa936 ]

Andrey reported a fault in the IPv6 route code:

kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Modules linked in:
CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff880069809600 task.stack: ffff880062dc8000
RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975
RSP: 0018:ffff880062dced30 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006
RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018
RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000
FS:  00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0
Call Trace:
 ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128
 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212
...

Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit
set. Flags passed to the kernel are blindly copied to the allocated
rt6_info by ip6_route_info_create making a newly inserted route appear
as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set
and expects rt->dst.from to be set - which it is not since it is not
really a per-cpu copy. The subsequent call to __ip6_dst_alloc then
generates the fault.

Fix by checking for the flag and failing with EINVAL.

Fixes: d52d3997f843f ("ipv6: Create percpu rt6_info")
Reported-by: Andrey Konovalov 
Signed-off-by: David Ahern 
Acked-by: Martin KaFai Lau 
Tested-by: Andrey Konovalov 
Signed-off-by: David S. Miller 
Signed-off-by: Greg Kroah-Hartman

crypto: ahash - Fix EINPROGRESS notification callback

2017-04-21T07:31:23+00:00

commit ef0579b64e93188710d48667cb5e014926af9f1b upstream.

The ahash API modifies the request's callback function in order
to clean up after itself in some corner cases (unaligned final
and missing finup).

When the request is complete ahash will restore the original
callback and everything is fine.  However, when the request gets
an EBUSY on a full queue, an EINPROGRESS callback is made while
the request is still ongoing.

In this case the ahash API will incorrectly call its own callback.

This patch fixes the problem by creating a temporary request
object on the stack which is used to relay EINPROGRESS back to
the original completion function.

This patch also adds code to preserve the original flags value.

Fixes: ab6bf4e5e5e4 ("crypto: hash - Fix the pointer voodoo in...")
Reported-by: Sabrina Dubroca 
Tested-by: Sabrina Dubroca 
Signed-off-by: Herbert Xu 
Signed-off-by: Greg Kroah-Hartman

new privimitive: iov_iter_revert()

2017-04-21T07:31:21+00:00

commit 27c0e3748e41ca79171ffa3e97415a20af6facd0 upstream.

opposite to iov_iter_advance(); the caller is responsible for never
using it to move back past the initial position.

Signed-off-by: Al Viro 
Signed-off-by: Greg Kroah-Hartman

target: Avoid mappedlun symlink creation during lun shutdown

2017-04-21T07:31:21+00:00

commit 49cb77e297dc611a1b795cfeb79452b3002bd331 upstream.

This patch closes a race between se_lun deletion during configfs
unlink in target_fabric_port_unlink() -> core_dev_del_lun()
-> core_tpg_remove_lun(), when transport_clear_lun_ref() blocks
waiting for percpu_ref RCU grace period to finish, but a new
NodeACL mappedlun is added before the RCU grace period has
completed.

This can happen in target_fabric_mappedlun_link() because it
only checks for se_lun->lun_se_dev, which is not cleared until
after transport_clear_lun_ref() percpu_ref RCU grace period
finishes.

This bug originally manifested as NULL pointer dereference
OOPsen in target_stat_scsi_att_intr_port_show_attr_dev() on
v4.1.y code, because it dereferences lun->lun_se_dev without
a explicit NULL pointer check.

In post v4.1 code with target-core RCU conversion, the code
in target_stat_scsi_att_intr_port_show_attr_dev() no longer
uses se_lun->lun_se_dev, but the same race still exists.

To address the bug, go ahead and set se_lun>lun_shutdown as
early as possible in core_tpg_remove_lun(), and ensure new
NodeACL mappedlun creation in target_fabric_mappedlun_link()
fails during se_lun shutdown.

Reported-by: James Shen 
Cc: James Shen 
Tested-by: James Shen 
Signed-off-by: Nicholas Bellinger 
Signed-off-by: Greg Kroah-Hartman

cgroup, kthread: close race window where new kthreads can be migrated to non-root cgroups

2017-04-21T07:31:18+00:00

commit 77f88796cee819b9c4562b0b6b44691b3b7755b1 upstream.

Creation of a kthread goes through a couple interlocked stages between
the kthread itself and its creator.  Once the new kthread starts
running, it initializes itself and wakes up the creator.  The creator
then can further configure the kthread and then let it start doing its
job by waking it up.

In this configuration-by-creator stage, the creator is the only one
that can wake it up but the kthread is visible to userland.  When
altering the kthread's attributes from userland is allowed, this is
fine; however, for cases where CPU affinity is critical,
kthread_bind() is used to first disable affinity changes from userland
and then set the affinity.  This also prevents the kthread from being
migrated into non-root cgroups as that can affect the CPU affinity and
many other things.

Unfortunately, the cgroup side of protection is racy.  While the
PF_NO_SETAFFINITY flag prevents further migrations, userland can win
the race before the creator sets the flag with kthread_bind() and put
the kthread in a non-root cgroup, which can lead to all sorts of
problems including incorrect CPU affinity and starvation.

This bug got triggered by userland which periodically tries to migrate
all processes in the root cpuset cgroup to a non-root one.  Per-cpu
workqueue workers got caught while being created and ended up with
incorrected CPU affinity breaking concurrency management and sometimes
stalling workqueue execution.

This patch adds task->no_cgroup_migration which disallows the task to
be migrated by userland.  kthreadd starts with the flag set making
every child kthread start in the root cgroup with migration
disallowed.  The flag is cleared after the kthread finishes
initialization by which time PF_NO_SETAFFINITY is set if the kthread
should stay in the root cgroup.

It'd be better to wait for the initialization instead of failing but I
couldn't think of a way of implementing that without adding either a
new PF flag, or sleeping and retrying from waiting side.  Even if
userland depends on changing cgroup membership of a kthread, it either
has to be synchronized with kthread_create() or periodically repeat,
so it's unlikely that this would break anything.

v2: Switch to a simpler implementation using a new task_struct bit
    field suggested by Oleg.

Signed-off-by: Tejun Heo 
Suggested-by: Oleg Nesterov 
Cc: Linus Torvalds 
Cc: Andrew Morton 
Cc: Peter Zijlstra (Intel) 
Cc: Thomas Gleixner 
Reported-and-debugged-by: Chris Mason 
Signed-off-by: Tejun Heo 
Signed-off-by: Greg Kroah-Hartman

PCI: Disable MSI for HiSilicon Hip06/Hip07 Root Ports

2017-04-12T10:41:21+00:00

[ Upstream commit 72f2ff0deb870145a5a2d24cd75b4f9936159a62 ]

The PCIe Root Port in Hip06/Hip07 SoCs advertises an MSI capability, but it
cannot generate MSIs.  It can transfer MSI/MSI-X from downstream devices,
but does not support MSI/MSI-X itself.

Add a quirk to prevent use of MSI/MSI-X by the Root Port.

[bhelgaas: changelog, sort vendor ID #define, drop device ID #define]
Signed-off-by: Dongdong Liu 
Signed-off-by: Bjorn Helgaas 
Reviewed-by: Gabriele Paoloni 
Reviewed-by: Zhou Wang 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

ARM: smccc: Update HVC comment to describe new quirk parameter

2017-04-12T10:41:21+00:00

[ Upstream commit 3046ec674d441562c6bb3e4284cd866743042ef3 ]

Commit 680a0873e193 ("arm: kernel: Add SMC structure parameter") added
a new "quirk" parameter to the SMC and HVC SMCCC backends, but only
updated the comment for the SMC version. This patch adds the new
paramater to the comment describing the HVC version too.

Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

firmware: qcom: scm: Fix interrupted SCM calls

2017-04-12T10:41:21+00:00

[ Upstream commit 82bcd087029f6056506ea929f11af02622230901 ]

This patch adds a Qualcomm specific quirk to the arm_smccc_smc call.

On Qualcomm ARM64 platforms, the SMC call can return before it has
completed.  If this occurs, the call can be restarted, but it requires
using the returned session ID value from the interrupted SMC call.

The quirk stores off the session ID from the interrupted call in the
quirk structure so that it can be used by the caller.

This patch folds in a fix given by Sricharan R:
https://lkml.org/lkml/2016/9/28/272

Signed-off-by: Andy Gross 
Reviewed-by: Will Deacon 
Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

arm: kernel: Add SMC structure parameter

2017-04-12T10:41:21+00:00

[ Upstream commit 680a0873e193bae666439f4b5e32c758e68f114c ]

This patch adds a quirk parameter to the arm_smccc_(smc/hvc) calls.
The quirk structure allows for specialized SMC operations due to SoC
specific requirements.  The current arm_smccc_(smc/hvc) is renamed and
macros are used instead to specify the standard arm_smccc_(smc/hvc) or
the arm_smccc_(smc/hvc)_quirk function.

This patch and partial implementation was suggested by Will Deacon.

Signed-off-by: Andy Gross 
Reviewed-by: Will Deacon 
Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman