linux-toradex.git/include, branch v5.12-rc7

Merge branch 'akpm' (patches from Andrew)

2021-04-10T00:06:32+00:00

Merge misc fixes from Andrew Morton:
 "14 patches.

  Subsystems affected by this patch series: mm (kasan, gup, pagecache,
  and kfence), MAINTAINERS, mailmap, nds32, gcov, ocfs2, ia64, and lib"

* emailed patches from Andrew Morton :
  lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS
  kfence, x86: fix preemptible warning on KPTI-enabled systems
  lib/test_kasan_module.c: suppress unused var warning
  kasan: fix conflict with page poisoning
  fs: direct-io: fix missing sdio->boundary
  ia64: fix user_stack_pointer() for ptrace()
  ocfs2: fix deadlock between setattr and dio_end_io_write
  gcov: re-fix clang-11+ support
  nds32: flush_dcache_page: use page_mapping_file to avoid races with swapoff
  mm/gup: check page posion status for coredump.
  .mailmap: fix old email addresses
  mailmap: update email address for Jordan Crouse
  treewide: change my e-mail address, fix my name
  MAINTAINERS: update CZ.NIC's Turris information

Merge tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2021-04-09T22:26:51+00:00

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.12-rc7, including fixes from can, ipsec,
  mac80211, wireless, and bpf trees.

  No scary regressions here or in the works, but small fixes for 5.12
  changes keep coming.

  Current release - regressions:

   - virtio: do not pull payload in skb->head

   - virtio: ensure mac header is set in virtio_net_hdr_to_skb()

   - Revert "net: correct sk_acceptq_is_full()"

   - mptcp: revert "mptcp: provide subflow aware release function"

   - ethernet: lan743x: fix ethernet frame cutoff issue

   - dsa: fix type was not set for devlink port

   - ethtool: remove link_mode param and derive link params from driver

   - sched: htb: fix null pointer dereference on a null new_q

   - wireless: iwlwifi: Fix softirq/hardirq disabling in
     iwl_pcie_enqueue_hcmd()

   - wireless: iwlwifi: fw: fix notification wait locking

   - wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
     rtnl dependency

  Current release - new code bugs:

   - napi: fix hangup on napi_disable for threaded napi

   - bpf: take module reference for trampoline in module

   - wireless: mt76: mt7921: fix airtime reporting and related tx hangs

   - wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
     config command

  Previous releases - regressions:

   - rfkill: revert back to old userspace API by default

   - nfc: fix infinite loop, refcount & memory leaks in LLCP sockets

   - let skb_orphan_partial wake-up waiters

   - xfrm/compat: Cleanup WARN()s that can be user-triggered

   - vxlan, geneve: do not modify the shared tunnel info when PMTU
     triggers an ICMP reply

   - can: fix msg_namelen values depending on CAN_REQUIRED_SIZE

   - can: uapi: mark union inside struct can_frame packed

   - sched: cls: fix action overwrite reference counting

   - sched: cls: fix err handler in tcf_action_init()

   - ethernet: mlxsw: fix ECN marking in tunnel decapsulation

   - ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx

   - ethernet: i40e: fix receiving of single packets in xsk zero-copy
     mode

   - ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic

  Previous releases - always broken:

   - bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET

   - bpf: Refcount task stack in bpf_get_task_stack

   - bpf, x86: Validate computation of branch displacements

   - ieee802154: fix many similar syzbot-found bugs
       - fix NULL dereferences in netlink attribute handling
       - reject unsupported operations on monitor interfaces
       - fix error handling in llsec_key_alloc()

   - xfrm: make ipv4 pmtu check honor ip header df

   - xfrm: make hash generation lock per network namespace

   - xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
     offload

   - ethtool: fix incorrect datatype in set_eee ops

   - xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
     model

   - openvswitch: fix send of uninitialized stack memory in ct limit
     reply

  Misc:

   - udp: add get handling for UDP_GRO sockopt"

* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
  net: fix hangup on napi_disable for threaded napi
  net: hns3: Trivial spell fix in hns3 driver
  lan743x: fix ethernet frame cutoff issue
  net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
  net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
  net: dsa: lantiq_gswip: Don't use PHY auto polling
  net: sched: sch_teql: fix null-pointer dereference
  ipv6: report errors for iftoken via netlink extack
  net: sched: fix err handler in tcf_action_init()
  net: sched: fix action overwrite reference counting
  Revert "net: sched: bump refcount for new action in ACT replace mode"
  ice: fix memory leak of aRFS after resuming from suspend
  i40e: Fix sparse warning: missing error code 'err'
  i40e: Fix sparse error: 'vsi->netdev' could be null
  i40e: Fix sparse error: uninitialized symbol 'ring'
  i40e: Fix sparse errors in i40e_txrx.c
  i40e: Fix parameters in aq_get_phy_register()
  nl80211: fix beacon head validation
  bpf, x86: Validate computation of branch displacements for x86-32
  bpf, x86: Validate computation of branch displacements for x86-64
  ...

treewide: change my e-mail address, fix my name

2021-04-09T21:54:23+00:00

Change my e-mail address to kabel@kernel.org, and fix my name in
non-code parts (add diacritical mark).

Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org
Signed-off-by: Marek Behún 
Cc: Bartosz Golaszewski 
Cc: Greg Kroah-Hartman 
Cc: Jassi Brar 
Cc: Linus Walleij 
Cc: Pavel Machek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf

2021-04-08T21:10:53+00:00

Daniel Borkmann says:

====================
pull-request: bpf 2021-04-08

The following pull-request contains BPF updates for your *net* tree.

We've added 4 non-merge commits during the last 2 day(s) which contain
a total of 4 files changed, 31 insertions(+), 10 deletions(-).

The main changes are:

1) Validate and reject invalid JIT branch displacements, from Piotr Krysiuk.

2) Fix incorrect unhash restore as well as fwd_alloc memory accounting in
   sock map, from John Fastabend.

====================

Signed-off-by: David S. Miller

Merge tag 'mac80211-for-net-2021-04-08.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

2021-04-08T21:08:37+00:00

Johannes berg says:

====================
Various small fixes:
 * S1G beacon validation
 * potential leak in nl80211
 * fast-RX confusion with 4-addr mode
 * erroneous WARN_ON that userspace can trigger
 * wrong time units in virt_wifi
 * rfkill userspace API breakage
 * TXQ AC confusing that led to traffic stopped forever
 * connection monitoring time after/before confusion
 * netlink beacon head validation buffer overrun
====================

Signed-off-by: David S. Miller

ipv6: report errors for iftoken via netlink extack

2021-04-08T20:52:36+00:00

Setting iftoken can fail for several different reasons but there
and there was no report to user as to the cause. Add netlink
extended errors to the processing of the request.

This requires adding additional argument through rtnl_af_ops
set_link_af callback.

Reported-by: Hongren Zheng 
Signed-off-by: Stephen Hemminger 
Reviewed-by: David Ahern 
Signed-off-by: David S. Miller

net: sched: fix err handler in tcf_action_init()

2021-04-08T20:47:33+00:00

With recent changes that separated action module load from action
initialization tcf_action_init() function error handling code was modified
to manually release the loaded modules if loading/initialization of any
further action in same batch failed. For the case when all modules
successfully loaded and some of the actions were initialized before one of
them failed in init handler. In this case for all previous actions the
module will be released twice by the error handler: First time by the loop
that manually calls module_put() for all ops, and second time by the action
destroy code that puts the module after destroying the action.

Reproduction:

$ sudo tc actions add action simple sdata \"2\" index 2
$ sudo tc actions add action simple sdata \"1\" index 1 \
                      action simple sdata \"2\" index 2
RTNETLINK answers: File exists
We have an error talking to the kernel
$ sudo tc actions ls action simple
total acts 1

        action order 0: Simple <"2">
         index 2 ref 1 bind 0
$ sudo tc actions flush action simple
$ sudo tc actions ls action simple
$ sudo tc actions add action simple sdata \"2\" index 2
Error: Failed to load TC action module.
We have an error talking to the kernel
$ lsmod | grep simple
act_simple             20480  -1

Fix the issue by modifying module reference counting handling in action
initialization code:

- Get module reference in tcf_idr_create() and put it in tcf_idr_release()
instead of taking over the reference held by the caller.

- Modify users of tcf_action_init_1() to always release the module
reference which they obtain before calling init function instead of
assuming that created action takes over the reference.

- Finally, modify tcf_action_init_1() to not release the module reference
when overwriting existing action as this is no longer necessary since both
upper and lower layers obtain and manage their own module references
independently.

Fixes: d349f9976868 ("net_sched: fix RTNL deadlock again caused by request_module()")
Suggested-by: Cong Wang 
Signed-off-by: Vlad Buslov 
Signed-off-by: David S. Miller

net: sched: fix action overwrite reference counting

2021-04-08T20:47:33+00:00

Action init code increments reference counter when it changes an action.
This is the desired behavior for cls API which needs to obtain action
reference for every classifier that points to action. However, act API just
needs to change the action and releases the reference before returning.
This sequence breaks when the requested action doesn't exist, which causes
act API init code to create new action with specified index, but action is
still released before returning and is deleted (unless it was referenced
concurrently by cls API).

Reproduction:

$ sudo tc actions ls action gact
$ sudo tc actions change action gact drop index 1
$ sudo tc actions ls action gact

Extend tcf_action_init() to accept 'init_res' array and initialize it with
action->ops->init() result. In tcf_action_add() remove pointers to created
actions from actions array before passing it to tcf_action_put_many().

Fixes: cae422f379f3 ("net: sched: use reference counting action init")
Reported-by: Kumar Kartikeya Dwivedi 
Signed-off-by: Vlad Buslov 
Signed-off-by: David S. Miller

rfkill: revert back to old userspace API by default

2021-04-08T08:14:45+00:00

Recompiling with the new extended version of struct rfkill_event
broke systemd in *two* ways:
 - It used "sizeof(struct rfkill_event)" to read the event, but
   then complained if it actually got something != 8, this broke
   it on new kernels (that include the updated API);
 - It used sizeof(struct rfkill_event) to write a command, but
   didn't implement the intended expansion protocol where the
   kernel returns only how many bytes it accepted, and errored
   out due to the unexpected smaller size on kernels that didn't
   include the updated API.

Even though systemd has now been fixed, that fix may not be always
deployed, and other applications could potentially have similar
issues.

As such, in the interest of avoiding regressions, revert the
default API "struct rfkill_event" back to the original size.

Instead, add a new "struct rfkill_event_ext" that extends it by
the new field, and even more clearly document that applications
should be prepared for extensions in two ways:
 * write might only accept fewer bytes on older kernels, and
   will return how many to let userspace know which data may
   have been ignored;
 * read might return anything between 8 (the original size) and
   whatever size the application sized its buffer at, indicating
   how much event data was supported by the kernel.

Perhaps that will help avoid such issues in the future and we
won't have to come up with another version of the struct if we
ever need to extend it again.

Applications that want to take advantage of the new field will
have to be modified to use struct rfkill_event_ext instead now,
which comes with the danger of them having already been updated
to use it from 'struct rfkill_event', but I found no evidence
of that, and it's still relatively new.

Cc: stable@vger.kernel.org # 5.11
Reported-by: Takashi Iwai 
Tested-by: Sedat Dilek  # LLVM/Clang v12.0.0-r4 (x86-64)
Link: https://lore.kernel.org/r/20210319232510.f1a139cfdd9c.Ic5c7c9d1d28972059e132ea653a21a427c326678@changeid
Signed-off-by: Johannes Berg

ethtool: Remove link_mode param and derive link params from driver

2021-04-07T21:53:04+00:00

Some drivers clear the 'ethtool_link_ksettings' struct in their
get_link_ksettings() callback, before populating it with actual values.
Such drivers will set the new 'link_mode' field to zero, resulting in
user space receiving wrong link mode information given that zero is a
valid value for the field.

Another problem is that some drivers (notably tun) can report random
values in the 'link_mode' field. This can result in a general protection
fault when the field is used as an index to the 'link_mode_params' array
[1].

This happens because such drivers implement their set_link_ksettings()
callback by simply overwriting their private copy of
'ethtool_link_ksettings' struct with the one they get from the stack,
which is not always properly initialized.

Fix these problems by removing 'link_mode' from 'ethtool_link_ksettings'
and instead have drivers call ethtool_params_from_link_mode() with the
current link mode. The function will derive the link parameters (e.g.,
speed) from the link mode and fill them in the 'ethtool_link_ksettings'
struct.

v3:
	* Remove link_mode parameter and derive the link parameters in
	  the driver instead of passing link_mode parameter to ethtool
	  and derive it there.

v2:
	* Introduce 'cap_link_mode_supported' instead of adding a
	  validity field to 'ethtool_link_ksettings' struct.

[1]
general protection fault, probably for non-canonical address 0xdffffc00f14cc32c: 0000 [#1] PREEMPT SMP KASAN
KASAN: probably user-memory-access in range [0x000000078a661960-0x000000078a661967]
CPU: 0 PID: 8452 Comm: syz-executor360 Not tainted 5.11.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__ethtool_get_link_ksettings+0x1a3/0x3a0 net/ethtool/ioctl.c:446
Code: b7 3e fa 83 fd ff 0f 84 30 01 00 00 e8 16 b0 3e fa 48 8d 3c ed 60 d5 69 8a 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03
+38 d0 7c 08 84 d2 0f 85 b9
RSP: 0018:ffffc900019df7a0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff888026136008 RCX: 0000000000000000
RDX: 00000000f14cc32c RSI: ffffffff873439ca RDI: 000000078a661960
RBP: 00000000ffff8880 R08: 00000000ffffffff R09: ffff88802613606f
R10: ffffffff873439bc R11: 0000000000000000 R12: 0000000000000000
R13: ffff88802613606c R14: ffff888011d0c210 R15: ffff888011d0c210
FS:  0000000000749300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b60f0 CR3: 00000000185c2000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 linkinfo_prepare_data+0xfd/0x280 net/ethtool/linkinfo.c:37
 ethnl_default_notify+0x1dc/0x630 net/ethtool/netlink.c:586
 ethtool_notify+0xbd/0x1f0 net/ethtool/netlink.c:656
 ethtool_set_link_ksettings+0x277/0x330 net/ethtool/ioctl.c:620
 dev_ethtool+0x2b35/0x45d0 net/ethtool/ioctl.c:2842
 dev_ioctl+0x463/0xb70 net/core/dev_ioctl.c:440
 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060
 sock_ioctl+0x477/0x6a0 net/socket.c:1177
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c8907043c6ac9 ("ethtool: Get link mode in use instead of speed and duplex parameters")
Signed-off-by: Danielle Ratson 
Reported-by: Eric Dumazet 
Reviewed-by: Ido Schimmel 
Signed-off-by: David S. Miller