linux-toradex.git/include, branch v6.13-rc1 Linux kernel for Apalis and Colibri modules Merge tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 2024-12-01T21:38:24+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-12-01T21:38:24+00:00 a14bf463e7dfa389850b9d47d38dda4fa71c8ade Pull i2c component probing support from Wolfram Sang: "Add OF component probing. Some devices are designed and manufactured with some components having multiple drop-in replacement options. These components are often connected to the mainboard via ribbon cables, having the same signals and pin assignments across all options. These may include the display panel and touchscreen on laptops and tablets, and the trackpad on laptops. Sometimes which component option is used in a particular device can be detected by some firmware provided identifier, other times that information is not available, and the kernel has to try to probe each device. Instead of a delicate dance between drivers and device tree quirks, this change introduces a simple I2C component probe function. For a given class of devices on the same I2C bus, it will go through all of them, doing a simple I2C read transfer and see which one of them responds. It will then enable the device that responds" * tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: MAINTAINERS: fix typo in I2C OF COMPONENT PROBER of: base: Document prefix argument for of_get_next_child_with_prefix() i2c: Fix whitespace style issue arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail platform/chrome: Introduce device tree hardware prober i2c: of-prober: Add GPIO support to simple helpers i2c: of-prober: Add simple helpers for regulator support i2c: Introduce OF component probe function of: base: Add for_each_child_of_node_with_prefix() of: dynamic: Add of_changeset_update_prop_string 
Pull i2c component probing support from Wolfram Sang:
 "Add OF component probing.

  Some devices are designed and manufactured with some components having
  multiple drop-in replacement options. These components are often
  connected to the mainboard via ribbon cables, having the same signals
  and pin assignments across all options. These may include the display
  panel and touchscreen on laptops and tablets, and the trackpad on
  laptops. Sometimes which component option is used in a particular
  device can be detected by some firmware provided identifier, other
  times that information is not available, and the kernel has to try to
  probe each device.

  Instead of a delicate dance between drivers and device tree quirks,
  this change introduces a simple I2C component probe function. For a
  given class of devices on the same I2C bus, it will go through all of
  them, doing a simple I2C read transfer and see which one of them
  responds. It will then enable the device that responds"

* tag 'i2c-for-6.13-rc1-part3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: fix typo in I2C OF COMPONENT PROBER
  of: base: Document prefix argument for of_get_next_child_with_prefix()
  i2c: Fix whitespace style issue
  arm64: dts: mediatek: mt8173-elm-hana: Mark touchscreens and trackpads as fail
  platform/chrome: Introduce device tree hardware prober
  i2c: of-prober: Add GPIO support to simple helpers
  i2c: of-prober: Add simple helpers for regulator support
  i2c: Introduce OF component probe function
  of: base: Add for_each_child_of_node_with_prefix()
  of: dynamic: Add of_changeset_update_prop_string
Merge tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace 2024-12-01T21:10:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-12-01T21:10:51+00:00 88862eeb476375687a1de5f45528a437ea598338 Pull bprintf() removal from Steven Rostedt: - Remove unused bprintf() function, that was added with the rest of the "bin-printf" functions. These are functions that are used by trace_printk() that allows to quickly save the format and arguments into the ring buffer without the expensive processing of converting numbers to ASCII. Then on output, at a much later time, the ring buffer is read and the string processing occurs then. The bprintf() was added for consistency but was never used. It can be safely removed. * tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: printf: Remove unused 'bprintf' 
Pull bprintf() removal from Steven Rostedt:

 - Remove unused bprintf() function, that was added with the rest of the
   "bin-printf" functions.

   These are functions that are used by trace_printk() that allows to
   quickly save the format and arguments into the ring buffer without
   the expensive processing of converting numbers to ASCII. Then on
   output, at a much later time, the ring buffer is read and the string
   processing occurs then. The bprintf() was added for consistency but
   was never used. It can be safely removed.

* tag 'trace-printf-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  printf: Remove unused 'bprintf'
Merge tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2024-12-01T20:41:21+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-12-01T20:41:21+00:00 f788b5ef1ca9b1c2f8d4e1beb2b25edc2db43ef4 Pull timer fixes from Borislav Petkov: - Fix a case where posix timers with a thread-group-wide target would miss signals if some of the group's threads are exiting - Fix a hang caused by ndelay() calling the wrong delay function __udelay() - Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO (microsecond resolution) and a negative offset * tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: posix-timers: Target group sigqueue to current task only if not exiting delay: Fix ndelay() spuriously treated as udelay() ntp: Remove invalid cast in time offset math 
Pull timer fixes from Borislav Petkov:

 - Fix a case where posix timers with a thread-group-wide target would
   miss signals if some of the group's threads are exiting

 - Fix a hang caused by ndelay() calling the wrong delay function
   __udelay()

 - Fix a wrong offset calculation in adjtimex(2) when using ADJ_MICRO
   (microsecond resolution) and a negative offset

* tag 'timers_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-timers: Target group sigqueue to current task only if not exiting
  delay: Fix ndelay() spuriously treated as udelay()
  ntp: Remove invalid cast in time offset math
printf: Remove unused 'bprintf' 2024-12-01T03:41:35+00:00 Dr. David Alan Gilbert linux@treblig.org 2024-10-02T17:31:47+00:00 f69e63756f7822fcdad8a34f9967e8b243e883ee bprintf() is unused. Remove it. It was added in the commit 4370aa4aa753 ("vsprintf: add binary printf") but as far as I can see was never used, unlike the other two functions in that patch. Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org Reviewed-by: Andy Shevchenko <andy@kernel.org> Acked-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> 
bprintf() is unused. Remove it. It was added in the commit 4370aa4aa753
("vsprintf: add binary printf") but as far as I can see was never used,
unlike the other two functions in that patch.

Link: https://lore.kernel.org/20241002173147.210107-1-linux@treblig.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Merge tag 'block-6.13-20242901' of git://git.kernel.dk/linux 2024-11-30T23:47:29+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-30T23:47:29+00:00 cfd47302ac64b595beb0a67a337b81942146448a Pull more block updates from Jens Axboe: - NVMe pull request via Keith: - Use correct srcu list traversal (Breno) - Scatter-gather support for metadata (Keith) - Fabrics shutdown race condition fix (Nilay) - Persistent reservations updates (Guixin) - Add the required bits for MD atomic write support for raid0/1/10 - Correct return value for unknown opcode in ublk - Fix deadlock with zone revalidation - Fix for the io priority request vs bio cleanups - Use the correct unsigned int type for various limit helpers - Fix for a race in loop - Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make it easier for actual humans to read - Fix potential UAF when iterating tags - A few fixes for bfq-iosched UAF issues - Fix for brd discard not decrementing the allocated page count - Various little fixes and cleanups * tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits) brd: decrease the number of allocated pages which discarded block, bfq: fix bfqq uaf in bfq_limit_depth() block: Don't allow an atomic write be truncated in blkdev_write_iter() mq-deadline: don't call req_get_ioprio from the I/O completion handler block: Prevent potential deadlock in blk_revalidate_disk_zones() block: Remove extra part pointer NULLify in blk_rq_init() nvme: tuning pr code by using defined structs and macros nvme: introduce change ptpl and iekey definition block: return bool from get_disk_ro and bdev_read_only block: remove a duplicate definition for bdev_read_only block: return bool from blk_rq_aligned block: return unsigned int from blk_lim_dma_alignment_and_pad block: return unsigned int from queue_dma_alignment block: return unsigned int from bdev_io_opt block: req->bio is always set in the merge code block: don't bother checking the data direction for merges block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()" md/raid10: Atomic write support md/raid1: Atomic write support ... 
Pull more block updates from Jens Axboe:

 - NVMe pull request via Keith:
      - Use correct srcu list traversal (Breno)
      - Scatter-gather support for metadata (Keith)
      - Fabrics shutdown race condition fix (Nilay)
      - Persistent reservations updates (Guixin)

 - Add the required bits for MD atomic write support for raid0/1/10

 - Correct return value for unknown opcode in ublk

 - Fix deadlock with zone revalidation

 - Fix for the io priority request vs bio cleanups

 - Use the correct unsigned int type for various limit helpers

 - Fix for a race in loop

 - Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
   it easier for actual humans to read

 - Fix potential UAF when iterating tags

 - A few fixes for bfq-iosched UAF issues

 - Fix for brd discard not decrementing the allocated page count

 - Various little fixes and cleanups

* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
  brd: decrease the number of allocated pages which discarded
  block, bfq: fix bfqq uaf in bfq_limit_depth()
  block: Don't allow an atomic write be truncated in blkdev_write_iter()
  mq-deadline: don't call req_get_ioprio from the I/O completion handler
  block: Prevent potential deadlock in blk_revalidate_disk_zones()
  block: Remove extra part pointer NULLify in blk_rq_init()
  nvme: tuning pr code by using defined structs and macros
  nvme: introduce change ptpl and iekey definition
  block: return bool from get_disk_ro and bdev_read_only
  block: remove a duplicate definition for bdev_read_only
  block: return bool from blk_rq_aligned
  block: return unsigned int from blk_lim_dma_alignment_and_pad
  block: return unsigned int from queue_dma_alignment
  block: return unsigned int from bdev_io_opt
  block: req->bio is always set in the merge code
  block: don't bother checking the data direction for merges
  block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
  Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
  md/raid10: Atomic write support
  md/raid1: Atomic write support
  ...
Merge tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux 2024-11-30T23:43:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-30T23:43:02+00:00 dd54fcced81d479d77acbeb4eea74b9ab9276bff Pull more io_uring updates from Jens Axboe: - Remove a leftover struct from when the cqwait registered waiting was transitioned to regions. - Fix for an issue introduced in this merge window, where nop->fd might be used uninitialized. Ensure it's always set. - Add capping of the task_work run in local task_work mode, to prevent bursty and long chains from adding too much latency. - Work around xa_store() leaving ->head non-NULL if it encounters an allocation error during storing. Just a debug trigger, and can go away once xa_store() behaves in a more expected way for this condition. Not a major thing as it basically requires fault injection to trigger it. - Fix a few mapping corner cases - Fix KCSAN complaint on reading the table size post unlock. Again not a "real" issue, but it's easy to silence by just keeping the reading inside the lock that protects it. * tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux: io_uring/tctx: work around xa_store() allocation error issue io_uring: fix corner case forgetting to vunmap io_uring: fix task_work cap overshooting io_uring: check for overflows in io_pin_pages io_uring/nop: ensure nop->fd is always initialized io_uring: limit local tw done io_uring: add io_local_work_pending() io_uring/region: return negative -E2BIG in io_create_region() io_uring: protect register tracing io_uring: remove io_uring_cqwait_reg_arg 
Pull more io_uring updates from Jens Axboe:

 - Remove a leftover struct from when the cqwait registered waiting was
   transitioned to regions.

 - Fix for an issue introduced in this merge window, where nop->fd might
   be used uninitialized. Ensure it's always set.

 - Add capping of the task_work run in local task_work mode, to prevent
   bursty and long chains from adding too much latency.

 - Work around xa_store() leaving ->head non-NULL if it encounters an
   allocation error during storing. Just a debug trigger, and can go
   away once xa_store() behaves in a more expected way for this
   condition. Not a major thing as it basically requires fault injection
   to trigger it.

 - Fix a few mapping corner cases

 - Fix KCSAN complaint on reading the table size post unlock. Again not
   a "real" issue, but it's easy to silence by just keeping the reading
   inside the lock that protects it.

* tag 'io_uring-6.13-20242901' of git://git.kernel.dk/linux:
  io_uring/tctx: work around xa_store() allocation error issue
  io_uring: fix corner case forgetting to vunmap
  io_uring: fix task_work cap overshooting
  io_uring: check for overflows in io_pin_pages
  io_uring/nop: ensure nop->fd is always initialized
  io_uring: limit local tw done
  io_uring: add io_local_work_pending()
  io_uring/region: return negative -E2BIG in io_create_region()
  io_uring: protect register tracing
  io_uring: remove io_uring_cqwait_reg_arg
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm 2024-11-30T22:51:08+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-30T22:51:08+00:00 c4bb3a2d641c02ac2c7aa45534b4cefdf9bf416b Pull more kvm updates from Paolo Bonzini: - ARM fixes - RISC-V Svade and Svadu (accessed and dirty bit) extension support for host and guest * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM dt-bindings: riscv: Add Svade and Svadu Entries RISC-V: Add Svade and Svadu Extensions Support KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition KVM: arm64: vgic: Make vgic_get_irq() more robust KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR 
Pull more kvm updates from Paolo Bonzini:

 - ARM fixes

 - RISC-V Svade and Svadu (accessed and dirty bit) extension support for
   host and guest

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: riscv: selftests: Add Svade and Svadu Extension to get-reg-list test
  RISC-V: KVM: Add Svade and Svadu Extensions Support for Guest/VM
  dt-bindings: riscv: Add Svade and Svadu Entries
  RISC-V: Add Svade and Svadu Extensions Support
  KVM: arm64: Use MDCR_EL2.HPME to evaluate overflow of hyp counters
  KVM: arm64: Ignore PMCNTENSET_EL0 while checking for overflow status
  KVM: arm64: Mark set_sysreg_masks() as inline to avoid build failure
  KVM: arm64: vgic-its: Add stronger type-checking to the ITS entry sizes
  KVM: arm64: vgic: Kill VGIC_MAX_PRIVATE definition
  KVM: arm64: vgic: Make vgic_get_irq() more robust
  KVM: arm64: vgic-v3: Sanitise guest writes to GICR_INVLPIR
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2024-11-30T21:41:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-30T21:41:50+00:00 6a34dfa15d6edf7e78b8118d862d2db0889cf669 Pull Kbuild updates from Masahiro Yamada: - Add generic support for built-in boot DTB files - Enable TAB cycling for dialog buttons in nconfig - Fix issues in streamline_config.pl - Refactor Kconfig - Add support for Clang's AutoFDO (Automatic Feedback-Directed Optimization) - Add support for Clang's Propeller, a profile-guided optimization. - Change the working directory to the external module directory for M= builds - Support building external modules in a separate output directory - Enable objtool for *.mod.o and additional kernel objects - Use lz4 instead of deprecated lz4c - Work around a performance issue with "git describe" - Refactor modpost * tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits) kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms gitignore: Don't ignore 'tags' directory kbuild: add dependency from vmlinux to resolve_btfids modpost: replace tdb_hash() with hash_str() kbuild: deb-pkg: add python3:native to build dependency genksyms: reduce indentation in export_symbol() modpost: improve error messages in device_id_check() modpost: rename alias symbol for MODULE_DEVICE_TABLE() modpost: rename variables in handle_moddevtable() modpost: move strstarts() to modpost.h modpost: convert do_usb_table() to a generic handler modpost: convert do_of_table() to a generic handler modpost: convert do_pnp_device_entry() to a generic handler modpost: convert do_pnp_card_entries() to a generic handler modpost: call module_alias_printf() from all do_*_entry() functions modpost: pass (struct module *) to do_*_entry() functions modpost: remove DEF_FIELD_ADDR_VAR() macro modpost: deduplicate MODULE_ALIAS() for all drivers modpost: introduce module_alias_printf() helper modpost: remove unnecessary check in do_acpi_entry() ... 
Pull Kbuild updates from Masahiro Yamada:

 - Add generic support for built-in boot DTB files

 - Enable TAB cycling for dialog buttons in nconfig

 - Fix issues in streamline_config.pl

 - Refactor Kconfig

 - Add support for Clang's AutoFDO (Automatic Feedback-Directed
   Optimization)

 - Add support for Clang's Propeller, a profile-guided optimization.

 - Change the working directory to the external module directory for M=
   builds

 - Support building external modules in a separate output directory

 - Enable objtool for *.mod.o and additional kernel objects

 - Use lz4 instead of deprecated lz4c

 - Work around a performance issue with "git describe"

 - Refactor modpost

* tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits)
  kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms
  gitignore: Don't ignore 'tags' directory
  kbuild: add dependency from vmlinux to resolve_btfids
  modpost: replace tdb_hash() with hash_str()
  kbuild: deb-pkg: add python3:native to build dependency
  genksyms: reduce indentation in export_symbol()
  modpost: improve error messages in device_id_check()
  modpost: rename alias symbol for MODULE_DEVICE_TABLE()
  modpost: rename variables in handle_moddevtable()
  modpost: move strstarts() to modpost.h
  modpost: convert do_usb_table() to a generic handler
  modpost: convert do_of_table() to a generic handler
  modpost: convert do_pnp_device_entry() to a generic handler
  modpost: convert do_pnp_card_entries() to a generic handler
  modpost: call module_alias_printf() from all do_*_entry() functions
  modpost: pass (struct module *) to do_*_entry() functions
  modpost: remove DEF_FIELD_ADDR_VAR() macro
  modpost: deduplicate MODULE_ALIAS() for all drivers
  modpost: introduce module_alias_printf() helper
  modpost: remove unnecessary check in do_acpi_entry()
  ...
Merge tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux 2024-11-30T19:18:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-30T19:18:16+00:00 0e287d31b62bb53ad81d5e59778384a40f8b6f56 Pull RTC updates from Alexandre Belloni: "New drivers: - Amlogic A4 and A5 RTC - Marvell 88PM886 PMIC RTC - Renesas RTCA-3 for Renesas RZ/G3S Driver updates: - ab-eoz9: fix temperature and alarm support - cmos: improve locking behaviour - isl12022: add alarm support - m48t59: improve epoch handling - mt6359: add range - rzn1: fix BCD conversions and simplify driver" * tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits) rtc: ab-eoz9: don't fail temperature reads on undervoltage notification rtc: rzn1: reduce register access rtc: rzn1: drop superfluous wday calculation m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly rtc: m48t59: Use platform_data struct for year offset value rtc: ab-eoz9: fix abeoz9_rtc_read_alarm rtc: rv3028: fix RV3028_TS_COUNT type rtc: rzn1: update Michel's email rtc: rzn1: fix BCD to rtc_time conversion errors rtc: amlogic-a4: fix compile error rtc: amlogic-a4: drop error messages MAINTAINERS: Add an entry for Amlogic RTC driver rtc: support for the Amlogic on-chip RTC dt-bindings: rtc: Add Amlogic A4 and A5 RTC rtc: add driver for Marvell 88PM886 PMIC RTC rtc: check if __rtc_read_time was successful in rtc_timer_do_work() rtc: pcf8563: Switch to regmap rtc: pcf8563: Sort headers alphabetically rtc: abx80x: Fix WDT bit position of the status register ... 
Pull RTC updates from Alexandre Belloni:
 "New drivers:
   - Amlogic A4 and A5 RTC
   - Marvell 88PM886 PMIC RTC
   - Renesas RTCA-3 for Renesas RZ/G3S

  Driver updates:
   - ab-eoz9: fix temperature and alarm support
   - cmos: improve locking behaviour
   - isl12022: add alarm support
   - m48t59: improve epoch handling
   - mt6359: add range
   - rzn1: fix BCD conversions and simplify driver"

* tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits)
  rtc: ab-eoz9: don't fail temperature reads on undervoltage notification
  rtc: rzn1: reduce register access
  rtc: rzn1: drop superfluous wday calculation
  m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver
  rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly
  rtc: m48t59: Use platform_data struct for year offset value
  rtc: ab-eoz9: fix abeoz9_rtc_read_alarm
  rtc: rv3028: fix RV3028_TS_COUNT type
  rtc: rzn1: update Michel's email
  rtc: rzn1: fix BCD to rtc_time conversion errors
  rtc: amlogic-a4: fix compile error
  rtc: amlogic-a4: drop error messages
  MAINTAINERS: Add an entry for Amlogic RTC driver
  rtc: support for the Amlogic on-chip RTC
  dt-bindings: rtc: Add Amlogic A4 and A5 RTC
  rtc: add driver for Marvell 88PM886 PMIC RTC
  rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
  rtc: pcf8563: Switch to regmap
  rtc: pcf8563: Sort headers alphabetically
  rtc: abx80x: Fix WDT bit position of the status register
  ...
Merge tag 'ceph-for-6.13-rc1' of https://github.com/ceph/ceph-client 2024-11-30T18:22:38+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-11-30T18:22:38+00:00 9d0ad045533ee37a208991ac5baaf6641e60a9ed Pull ceph updates from Ilya Dryomov: "A fix for the mount "device" string parser from Patrick and two cred reference counting fixups from Max, marked for stable. Also included a number of cleanups and a tweak to MAINTAINERS to avoid unnecessarily CCing netdev list" * tag 'ceph-for-6.13-rc1' of https://github.com/ceph/ceph-client: ceph: fix cred leak in ceph_mds_check_access() ceph: pass cred pointer to ceph_mds_auth_match() ceph: improve caps debugging output ceph: correct ceph_mds_cap_peer field name ceph: correct ceph_mds_cap_item field name ceph: miscellaneous spelling fixes ceph: Use strscpy() instead of strcpy() in __get_snap_name() ceph: Use str_true_false() helper in status_show() ceph: requalify some char pointers as const ceph: extract entity name from device id MAINTAINERS: exclude net/ceph from networking ceph: Remove fs/ceph deadcode libceph: Remove unused ceph_crypto_key_encode libceph: Remove unused ceph_osdc_watch_check libceph: Remove unused pagevec functions libceph: Remove unused ceph_pagelist functions 
Pull ceph updates from Ilya Dryomov:
 "A fix for the mount "device" string parser from Patrick and two cred
  reference counting fixups from Max, marked for stable.

  Also included a number of cleanups and a tweak to MAINTAINERS to avoid
  unnecessarily CCing netdev list"

* tag 'ceph-for-6.13-rc1' of https://github.com/ceph/ceph-client:
  ceph: fix cred leak in ceph_mds_check_access()
  ceph: pass cred pointer to ceph_mds_auth_match()
  ceph: improve caps debugging output
  ceph: correct ceph_mds_cap_peer field name
  ceph: correct ceph_mds_cap_item field name
  ceph: miscellaneous spelling fixes
  ceph: Use strscpy() instead of strcpy() in __get_snap_name()
  ceph: Use str_true_false() helper in status_show()
  ceph: requalify some char pointers as const
  ceph: extract entity name from device id
  MAINTAINERS: exclude net/ceph from networking
  ceph: Remove fs/ceph deadcode
  libceph: Remove unused ceph_crypto_key_encode
  libceph: Remove unused ceph_osdc_watch_check
  libceph: Remove unused pagevec functions
  libceph: Remove unused ceph_pagelist functions