Pull tracing fix from Steven Rostedt:
 "Fix showing of TASK_COMM_LEN instead of its value

  The TASK_COMM_LEN was converted from a macro into an enum so that BTF
  would have access to it. But this unfortunately caused TASK_COMM_LEN
  to display in the format fields of trace events, as they are created
  by the TRACE_EVENT() macro and such, macros convert to their values,
  where as enums do not.

  To handle this, instead of using the field itself to be display, save
  the value of the array size as another field in the trace_event_fields
  structure, and use that instead.

  Not only does this fix the issue, but also converts the other trace
  events that have this same problem (but were not breaking tooling).

  With this change, the original work around b3bc8547d3be6 ("tracing:
  Have TRACE_DEFINE_ENUM affect trace event types as well") could be
  reverted (but that should be done in the merge window)"

* tag 'trace-v6.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix TASK_COMM_LEN in trace event format file

After commit 3087c61ed2c4 ("tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN"),
the content of the format file under
/sys/kernel/tracing/events/task/task_newtask was changed from
  field:char comm[16];    offset:12;    size:16;    signed:0;
to
  field:char comm[TASK_COMM_LEN];    offset:12;    size:16;    signed:0;

John reported that this change breaks older versions of perfetto.
Then Mathieu pointed out that this behavioral change was caused by the
use of __stringify(_len), which happens to work on macros, but not on enum
labels. And he also gave the suggestion on how to fix it:
  :One possible solution to make this more robust would be to extend
  :struct trace_event_fields with one more field that indicates the length
  :of an array as an actual integer, without storing it in its stringified
  :form in the type, and do the formatting in f_show where it belongs.

The result as follows after this change,
$ cat /sys/kernel/tracing/events/task/task_newtask/format
        field:char comm[16];    offset:12;      size:16;        signed:0;

Link: https://lore.kernel.org/lkml/Y+QaZtz55LIirsUO@google.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230210155921.4610-1-laoar.shao@gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20230212151303.12353-1-laoar.shao@gmail.com

Cc: stable@vger.kernel.org
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Kajetan Puchalski <kajetan.puchalski@arm.com>
CC: Qais Yousef <qyousef@layalina.io>
Fixes: 3087c61ed2c4 ("tools/testing/selftests/bpf: replace open-coded 16 with TASK_COMM_LEN")
Reported-by: John Stultz <jstultz@google.com>
Debugged-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull drm fixes from Dave Airlie:
 "Weekly fixes.

  The amdgpu had a few small fixes to display flicker on certain
  configurations, however it was found the the flicker was lessened but
  there were other unintended consequences, so for now they've been
  reverted and replaced with an option for users to test with so future
  fixes can be developed.

  Otherwise apart from the usual bunch of i915 and amdgpu, there's a
  client, virtio-gpu and an nvidiafb fix that reorders its loading to
  avoid failure.

  client:
   - refcount fix

  amdgpu:
   - a bunch of attempted flicker fixes that regressed turned into a
     user workaround option for now
   - Properly fix S/G display with AGP aperture enabled
   - Fix cursor offset with 180 rotation
   - SMU13 fixes
   - Use TGID for GPUVM traces
   - Fix oops on in fence error path
   - Don't run IB tests on hw rings when sw rings are in use
   - memory leak fix

  i915:
   - Display watermark fix
   - fbdev fix for PSR, FBC, DRRS
   - Move fd_install after last use of fence
   - Initialize the obj flags for shmem objects
   - Fix VBT DSI DVO port handling

  virtio-gpu:
   - fence fix

  nvidiafb:
   - regression fix for driver load when no hw supported"

* tag 'drm-fixes-2023-02-10' of git://anongit.freedesktop.org/drm/drm: (27 commits)
  Revert "drm/amd/display: disable S/G display on DCN 3.1.5"
  Revert "drm/amd/display: disable S/G display on DCN 2.1.0"
  Revert "drm/amd/display: disable S/G display on DCN 3.1.2/3"
  drm/amdgpu: add S/G display parameter
  drm/amdgpu/smu: skip pptable init under sriov
  amd/amdgpu: remove test ib on hw ring
  drm/amdgpu/fence: Fix oops due to non-matching drm_sched init/fini
  drm/amdgpu: Use the TGID for trace_amdgpu_vm_update_ptes
  drm/amdgpu: Add unique_id support for GC 11.0.1/2
  drm/amd/pm: bump SMU 13.0.7 driver_if header version
  drm/amd/pm: bump SMU 13.0.0 driver_if header version
  drm/amd/pm: add SMU 13.0.7 missing GetPptLimit message mapping
  drm/amd/display: fix cursor offset on rotation 180
  drm/amd/amdgpu: enable athub cg 11.0.3
  Revert "drm/amd/display: disable S/G display on DCN 3.1.4"
  drm/amd/display: properly handling AGP aperture in vm setup
  drm/amd/display: disable S/G display on DCN 3.1.2/3
  drm/amd/display: disable S/G display on DCN 2.1.0
  drm/i915: Fix VBT DSI DVO port handling
  drm/client: fix circular reference counting issue
  ...

A fix for a circular refcounting in drm/client, one for a memory leak in
amdgpu and a virtio fence fix when interrupted

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209083600.7hi6roht6xxgldgz@houat

Pull networking fixes from Paolo Abeni:
 "Including fixes from can and ipsec subtrees.

  Current release - regressions:

   - sched: fix off by one in htb_activate_prios()

   - eth: mana: fix accessing freed irq affinity_hint

   - eth: ice: fix out-of-bounds KASAN warning in virtchnl

  Current release - new code bugs:

   - eth: mtk_eth_soc: enable special tag when any MAC uses DSA

  Previous releases - always broken:

   - core: fix sk->sk_txrehash default

   - neigh: make sure used and confirmed times are valid

   - mptcp: be careful on subflow status propagation on errors

   - xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr()

   - phylink: move phy_device_free() to correctly release phy device

   - eth: mlx5:
      - fix crash unsetting rx-vlan-filter in switchdev mode
      - fix hang on firmware reset
      - serialize module cleanup with reload and remove"

* tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
  selftests: forwarding: lib: quote the sysctl values
  net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used
  rds: rds_rm_zerocopy_callback() use list_first_entry()
  net: txgbe: Update support email address
  selftests: Fix failing VXLAN VNI filtering test
  selftests: mptcp: stop tests earlier
  selftests: mptcp: allow more slack for slow test-case
  mptcp: be careful on subflow status propagation on errors
  mptcp: fix locking for in-kernel listener creation
  mptcp: fix locking for setsockopt corner-case
  mptcp: do not wait for bare sockets' timeout
  net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0
  nfp: ethtool: fix the bug of setting unsupported port speed
  txhash: fix sk->sk_txrehash default
  net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg()
  net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA
  net: sched: sch: Fix off by one in htb_activate_prios()
  igc: Add ndo_tx_timeout support
  net: mana: Fix accessing freed irq affinity_hint
  hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC
  ...

Currently, each core device has VF pages counter which stores number of
fw pages used by its VFs and SFs.

The current design led to a hang when performing firmware reset on DPU,
where the DPU PFs stalled in sriov unload flow due to waiting on release
of SFs pages instead of waiting on only VFs pages.

Thus, Add a separate counter for SF firmware pages, which will prevent
the stall scenario described above.

Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently, an independent page counter is used for tracking memory usage
for each function type such as VF, PF and host PF (DPU).

For better code-readibilty, use a single array that stores
the number of allocated memory pages for each function type.

Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

We reference dump buffers both by their handle as well as their
object. The problem is now that when anybody iterates over the DRM
framebuffers and exports the underlying GEM objects through DMA-buf
we run into a circular reference count situation.

The result is that the fbdev handling holds the GEM handle preventing
the DMA-buf in the GEM object to be released. This DMA-buf in turn
holds a reference to the driver module which on unload would release
the fbdev.

Break that loop by releasing the handle as soon as the DRM
framebuffer object is created. The DRM framebuffer and the DRM client
buffer structure still hold a reference to the underlying GEM object
preventing its destruction.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: c76f0f7cb546 ("drm: Begin an API for in-kernel clients")
Cc: <stable@vger.kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126102814.8722-1-christian.koenig@amd.com

An interrupted dma_fence_wait() becomes an -ERESTARTSYS returned
to userspace ioctl(DRM_IOCTL_VIRTGPU_EXECBUFFER) calls, prompting to
retry the ioctl(), but the passed exbuf->fence_fd has been reset to -1,
making the retry attempt fail at sync_file_get_fence().

The uapi for DRM_IOCTL_VIRTGPU_EXECBUFFER is changed to retain the
passed value for exbuf->fence_fd when returning anything besides a
successful result from the ioctl.

Fixes: 2cd7b6f08bc4 ("drm/virtio: add in/out fence support for explicit synchronization")
Signed-off-by: Ryan Neph <ryanneph@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203233345.2477767-1-ryanneph@chromium.org

Since commit 58e0be1ef6118 ("net: use struct_group to copy ip/ipv6
header addresses"), ip and ipv6 headers started to use the __struct_group
definition, which is defined at include/uapi/linux/stddef.h. However,
linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h,
which breaks build of xskxceiver bpf selftest if you install the uapi
headers in the system:

$ make V=1 xskxceiver -C tools/testing/selftests/bpf
...
make: Entering directory '(...)/tools/testing/selftests/bpf'
gcc -g -O0 -rdynamic -Wall -Werror (...)
In file included from xskxceiver.c:79:
/usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’
  103 |         __struct_group(/* no tag */, addrs, /* no attrs */,
      |         ^~~~~~~~~~~~~~
...

Include the missing <linux/stddef.h> dependency in ip.h and do the
same for the ipv6.h header.

Fixes: 58e0be1ef611 ("net: use struct_group to copy ip/ipv6 header addresses")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>