Pull tracing and bootconfig updates:
 "Fixes and changes to bootconfig before it goes live in a release.

  Change in API of bootconfig (before it comes live in a release):
  - Have a magic value "BOOTCONFIG" in initrd to know a bootconfig
    exists
  - Set CONFIG_BOOT_CONFIG to 'n' by default
  - Show error if "bootconfig" on cmdline but not compiled in
  - Prevent redefining the same value
  - Have a way to append values
  - Added a SELECT BLK_DEV_INITRD to fix a build failure

  Synthetic event fixes:
  - Switch to raw_smp_processor_id() for recording CPU value in preempt
    section. (No care for what the value actually is)
  - Fix samples always recording u64 values
  - Fix endianess
  - Check number of values matches number of fields
  - Fix a printing bug

  Fix of trace_printk() breaking postponed start up tests

  Make a function static that is only used in a single file"

* tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue
  bootconfig: Add append value operator support
  bootconfig: Prohibit re-defining value on same key
  bootconfig: Print array as multiple commands for legacy command line
  bootconfig: Reject subkey and value on same parent key
  tools/bootconfig: Remove unneeded error message silencer
  bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
  bootconfig: Set CONFIG_BOOT_CONFIG=n by default
  tracing: Clear trace_state when starting trace
  bootconfig: Mark boot_config_checksum() static
  tracing: Disable trace_printk() on post poned tests
  tracing: Have synthetic event test use raw_smp_processor_id()
  tracing: Fix number printing bug in print_synth_event()
  tracing: Check that number of vals matches number of synth event fields
  tracing: Make synth_event trace functions endian-correct
  tracing: Make sure synth_event_trace() example always uses u64

Since commit d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by
default") also changed the CONFIG_BOOTTIME_TRACING to select
CONFIG_BOOT_CONFIG to show the boot-time tracing on the menu,
it introduced wrong dependencies with BLK_DEV_INITRD as below.

WARNING: unmet direct dependencies detected for BOOT_CONFIG
  Depends on [n]: BLK_DEV_INITRD [=n]
  Selected by [y]:
  - BOOTTIME_TRACING [=y] && TRACING_SUPPORT [=y] && FTRACE [=y] && TRACING [=y]

This makes the CONFIG_BOOT_CONFIG selects CONFIG_BLK_DEV_INITRD to
fix this error and make CONFIG_BOOTTIME_TRACING=n by default, so
that both boot-time tracing and boot configuration off but those
appear on the menu list.

Link: http://lkml.kernel.org/r/158264140162.23842.11237423518607465535.stgit@devnote2

Fixes: d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Compiled-tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add bootconfig magic word to the end of bootconfig on initrd
image for indicating explicitly the bootconfig is there.
Also tools/bootconfig treats wrong size or wrong checksum or
parse error as an error, because if there is a bootconfig magic
word, there must be a bootconfig.

The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word.
Thus the block image of the initrd file with bootconfig is
as follows.

[Initrd][bootconfig][size][csum][#BOOTCONFIG\n]

Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Set CONFIG_BOOT_CONFIG=n by default. This also warns
user if CONFIG_BOOT_CONFIG=n but "bootconfig" is given
in the kernel command line.

Link: http://lkml.kernel.org/r/158220111291.26565.9036889083940367969.stgit@devnote2

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull tracing fixes from Steven Rostedt:
 "Various fixes:

   - Fix an uninitialized variable

   - Fix compile bug to bootconfig userspace tool (in tools directory)

   - Suppress some error messages of bootconfig userspace tool

   - Remove unneded CONFIG_LIBXBC from bootconfig

   - Allocate bootconfig xbc_nodes dynamically. To ease complaints about
     taking up static memory at boot up

   - Use of parse_args() to parse bootconfig instead of strstr() usage
     Prevents issues of double quotes containing the interested string

   - Fix missing ring_buffer_nest_end() on synthetic event error path

   - Return zero not -EINVAL on soft disabled synthetic event (soft
     disabling must be the same as hard disabling, which returns zero)

   - Consolidate synthetic event code (remove duplicate code)"

* tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Consolidate trace() functions
  tracing: Don't return -EINVAL when tracing soft disabled synth events
  tracing: Add missing nest end to synth_event_trace_start() error case
  tools/bootconfig: Suppress non-error messages
  bootconfig: Allocate xbc_nodes array dynamically
  bootconfig: Use parse_args() to find bootconfig and '--'
  tracing/kprobe: Fix uninitialized variable bug
  bootconfig: Remove unneeded CONFIG_LIBXBC
  tools/bootconfig: Fix wrong __VA_ARGS__ usage

Since there is no user except CONFIG_BOOT_CONFIG and no plan
to use it from other functions, CONFIG_LIBXBC can be removed
and we can use CONFIG_BOOT_CONFIG directly.

Link: http://lkml.kernel.org/r/158098769281.939.16293492056419481105.stgit@devnote2

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull tracing updates from Steven Rostedt:

 - Added new "bootconfig".

   This looks for a file appended to initrd to add boot config options,
   and has been discussed thoroughly at Linux Plumbers.

   Very useful for adding kprobes at bootup.

   Only enabled if "bootconfig" is on the real kernel command line.

 - Created dynamic event creation.

   Merges common code between creating synthetic events and kprobe
   events.

 - Rename perf "ring_buffer" structure to "perf_buffer"

 - Rename ftrace "ring_buffer" structure to "trace_buffer"

   Had to rename existing "trace_buffer" to "array_buffer"

 - Allow trace_printk() to work withing (some) tracing code.

 - Sort of tracing configs to be a little better organized

 - Fixed bug where ftrace_graph hash was not being protected properly

 - Various other small fixes and clean ups

* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
  bootconfig: Show the number of nodes on boot message
  tools/bootconfig: Show the number of bootconfig nodes
  bootconfig: Add more parse error messages
  bootconfig: Use bootconfig instead of boot config
  ftrace: Protect ftrace_graph_hash with ftrace_sync
  ftrace: Add comment to why rcu_dereference_sched() is open coded
  tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
  tracing: Annotate ftrace_graph_hash pointer with __rcu
  bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
  tracing: Use seq_buf for building dynevent_cmd string
  tracing: Remove useless code in dynevent_arg_pair_add()
  tracing: Remove check_arg() callbacks from dynevent args
  tracing: Consolidate some synth_event_trace code
  tracing: Fix now invalid var_ref_vals assumption in trace action
  tracing: Change trace_boot to use synth_event interface
  tracing: Move tracing selftests to bottom of menu
  tracing: Move mmio tracer config up with the other tracers
  tracing: Move tracing test module configs together
  tracing: Move all function tracing configs together
  tracing: Documentation for in-kernel synthetic event API
  ...

Pull UML updates from Anton Ivanov:
 "I am sending this on behalf of Richard who is traveling.

  This contains the following changes for UML:

   - Fix for time travel mode

   - Disable CONFIG_CONSTRUCTORS again

   - A new command line option to have an non-raw serial line

   - Preparations to remove obsolete UML network drivers"

* tag 'for-linus-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Fix time-travel=inf-cpu with xor/raid6
  Revert "um: Enable CONFIG_CONSTRUCTORS"
  um: Mark non-vector net transports as obsolete
  um: Add an option to make serial driver non-raw

Pull networking updates from David Miller:

 1) Add WireGuard

 2) Add HE and TWT support to ath11k driver, from John Crispin.

 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.

 4) Add variable window congestion control to TIPC, from Jon Maloy.

 5) Add BCM84881 PHY driver, from Russell King.

 6) Start adding netlink support for ethtool operations, from Michal
    Kubecek.

 7) Add XDP drop and TX action support to ena driver, from Sameeh
    Jubran.

 8) Add new ipv4 route notifications so that mlxsw driver does not have
    to handle identical routes itself. From Ido Schimmel.

 9) Add BPF dynamic program extensions, from Alexei Starovoitov.

10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.

11) Add support for macsec HW offloading, from Antoine Tenart.

12) Add initial support for MPTCP protocol, from Christoph Paasch,
    Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.

13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
    Cherian, and others.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
  net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
  udp: segment looped gso packets correctly
  netem: change mailing list
  qed: FW 8.42.2.0 debug features
  qed: rt init valid initialization changed
  qed: Debug feature: ilt and mdump
  qed: FW 8.42.2.0 Add fw overlay feature
  qed: FW 8.42.2.0 HSI changes
  qed: FW 8.42.2.0 iscsi/fcoe changes
  qed: Add abstraction for different hsi values per chip
  qed: FW 8.42.2.0 Additional ll2 type
  qed: Use dmae to write to widebus registers in fw_funcs
  qed: FW 8.42.2.0 Parser offsets modified
  qed: FW 8.42.2.0 Queue Manager changes
  qed: FW 8.42.2.0 Expose new registers and change windows
  qed: FW 8.42.2.0 Internal ram offsets modifications
  MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
  Documentation: net: octeontx2: Add RVU HW and drivers overview
  octeontx2-pf: ethtool RSS config support
  octeontx2-pf: Add basic ethtool support
  ...

Pull objtool updates from Ingo Molnar:
 "The main changes are to move the ORC unwind table sorting from early
  init to build-time - this speeds up booting.

  No change in functionality intended"

* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Fix !CONFIG_MODULES build warning
  x86/unwind/orc: Remove boot-time ORC unwind tables sorting
  scripts/sorttable: Implement build-time ORC unwind table sorting
  scripts/sorttable: Rename 'sortextable' to 'sorttable'
  scripts/sortextable: Refactor the do_func() function
  scripts/sortextable: Remove dead code
  scripts/sortextable: Clean up the code to meet the kernel coding style better
  scripts/sortextable: Rewrite error/success handling