<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/init/initramfs.c, branch v5.17-rc1</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>memblock: use memblock_free for freeing virtual pointers</title>
<updated>2021-11-06T20:30:41+00:00</updated>
<author>
<name>Mike Rapoport</name>
<email>rppt@linux.ibm.com</email>
</author>
<published>2021-11-05T20:43:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=4421cca0a3e4833b3bf0f20de98eb580ab8c7290'/>
<id>4421cca0a3e4833b3bf0f20de98eb580ab8c7290</id>
<content type='text'>
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()

The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.

    @@
    identifier vaddr;
    expression size;
    @@
    (
    - memblock_phys_free(__pa(vaddr), size);
    + memblock_free(vaddr, size);
    |
    - memblock_free_ptr(vaddr, size);
    + memblock_free(vaddr, size);
    )

[sfr@canb.auug.org.au: fixup]
  Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au

Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Signed-off-by: Stephen Rothwell &lt;sfr@canb.auug.org.au&gt;
Cc: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
Cc: Juergen Gross &lt;jgross@suse.com&gt;
Cc: Shahab Vahedi &lt;Shahab.Vahedi@synopsys.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()

The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.

    @@
    identifier vaddr;
    expression size;
    @@
    (
    - memblock_phys_free(__pa(vaddr), size);
    + memblock_free(vaddr, size);
    |
    - memblock_free_ptr(vaddr, size);
    + memblock_free(vaddr, size);
    )

[sfr@canb.auug.org.au: fixup]
  Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au

Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Signed-off-by: Stephen Rothwell &lt;sfr@canb.auug.org.au&gt;
Cc: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
Cc: Juergen Gross &lt;jgross@suse.com&gt;
Cc: Shahab Vahedi &lt;Shahab.Vahedi@synopsys.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>memblock: rename memblock_free to memblock_phys_free</title>
<updated>2021-11-06T20:30:41+00:00</updated>
<author>
<name>Mike Rapoport</name>
<email>rppt@linux.ibm.com</email>
</author>
<published>2021-11-05T20:43:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=3ecc68349bbab6bff1d12cbc7951ca6019b2faf6'/>
<id>3ecc68349bbab6bff1d12cbc7951ca6019b2faf6</id>
<content type='text'>
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().

The callers are updated with the below semantic patch:

    @@
    expression addr;
    expression size;
    @@
    - memblock_free(addr, size);
    + memblock_phys_free(addr, size);

Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Cc: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
Cc: Juergen Gross &lt;jgross@suse.com&gt;
Cc: Shahab Vahedi &lt;Shahab.Vahedi@synopsys.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().

The callers are updated with the below semantic patch:

    @@
    expression addr;
    expression size;
    @@
    - memblock_free(addr, size);
    + memblock_phys_free(addr, size);

Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport &lt;rppt@linux.ibm.com&gt;
Cc: Christophe Leroy &lt;christophe.leroy@csgroup.eu&gt;
Cc: Juergen Gross &lt;jgross@suse.com&gt;
Cc: Shahab Vahedi &lt;Shahab.Vahedi@synopsys.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>init: move usermodehelper_enable() to populate_rootfs()</title>
<updated>2021-09-08T18:50:27+00:00</updated>
<author>
<name>Rasmus Villemoes</name>
<email>linux@rasmusvillemoes.dk</email>
</author>
<published>2021-09-08T03:00:03+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b234ed6d629420827e2839c8c8935be85a0867fd'/>
<id>b234ed6d629420827e2839c8c8935be85a0867fd</id>
<content type='text'>
Currently, usermodehelper is enabled right before PID1 starts going
through the initcalls. However, any call of a usermodehelper from a
pure_, core_, postcore_, arch_, subsys_ or fs_ initcall is futile, as
there is no filesystem contents yet.

Up until commit e7cb072eb988 ("init/initramfs.c: do unpacking
asynchronously"), such calls, whether via some request_module(), a
legacy uevent "/sbin/hotplug" notification or something else, would
just fail silently with (presumably) -ENOENT from
kernel_execve(). However, that commit introduced the
wait_for_initramfs() synchronization hook which must be called from
the usermodehelper exec path right before the kernel_execve, in order
that request_module() et al done from *after* rootfs_initcall()
time (i.e. device_ and late_ initcalls) would continue to find a
populated initramfs as they used to.

Any call of wait_for_initramfs() done before the unpacking has been
scheduled (i.e. before rootfs_initcall time) must just return
immediately [and let the caller find an empty file system] in order
not to deadlock the machine. I mistakenly thought, and my limited
testing confirmed, that there were no such calls, so I added a
pr_warn_once() in wait_for_initramfs(). It turns out that one can
indeed hit request_module() as well as kobject_uevent_env() during
those early init calls, leading to a user-visible warning in the
kernel log emitted consistently for certain configurations.

We could just remove the pr_warn_once(), but I think it's better to
postpone enabling the usermodehelper framework until there is at least
some chance of finding the executable. That is also a little more
efficient in that a lot of work done in umh.c will be elided. However,
it does change the error seen by those early callers from -ENOENT to
-EBUSY, so there is a risk of a regression if any caller care about
the exact error value.

Link: https://lkml.kernel.org/r/20210728134638.329060-1-linux@rasmusvillemoes.dk
Fixes: e7cb072eb988 ("init/initramfs.c: do unpacking asynchronously")
Signed-off-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Reported-by: Alexander Egorenkov &lt;egorenar@linux.ibm.com&gt;
Reported-by: Bruno Goncalves &lt;bgoncalv@redhat.com&gt;
Reported-by: Heiner Kallweit &lt;hkallweit1@gmail.com&gt;
Cc: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Currently, usermodehelper is enabled right before PID1 starts going
through the initcalls. However, any call of a usermodehelper from a
pure_, core_, postcore_, arch_, subsys_ or fs_ initcall is futile, as
there is no filesystem contents yet.

Up until commit e7cb072eb988 ("init/initramfs.c: do unpacking
asynchronously"), such calls, whether via some request_module(), a
legacy uevent "/sbin/hotplug" notification or something else, would
just fail silently with (presumably) -ENOENT from
kernel_execve(). However, that commit introduced the
wait_for_initramfs() synchronization hook which must be called from
the usermodehelper exec path right before the kernel_execve, in order
that request_module() et al done from *after* rootfs_initcall()
time (i.e. device_ and late_ initcalls) would continue to find a
populated initramfs as they used to.

Any call of wait_for_initramfs() done before the unpacking has been
scheduled (i.e. before rootfs_initcall time) must just return
immediately [and let the caller find an empty file system] in order
not to deadlock the machine. I mistakenly thought, and my limited
testing confirmed, that there were no such calls, so I added a
pr_warn_once() in wait_for_initramfs(). It turns out that one can
indeed hit request_module() as well as kobject_uevent_env() during
those early init calls, leading to a user-visible warning in the
kernel log emitted consistently for certain configurations.

We could just remove the pr_warn_once(), but I think it's better to
postpone enabling the usermodehelper framework until there is at least
some chance of finding the executable. That is also a little more
efficient in that a lot of work done in umh.c will be elided. However,
it does change the error seen by those early callers from -ENOENT to
-EBUSY, so there is a risk of a regression if any caller care about
the exact error value.

Link: https://lkml.kernel.org/r/20210728134638.329060-1-linux@rasmusvillemoes.dk
Fixes: e7cb072eb988 ("init/initramfs.c: do unpacking asynchronously")
Signed-off-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Reported-by: Alexander Egorenkov &lt;egorenar@linux.ibm.com&gt;
Reported-by: Bruno Goncalves &lt;bgoncalv@redhat.com&gt;
Reported-by: Heiner Kallweit &lt;hkallweit1@gmail.com&gt;
Cc: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>init/initramfs.c: do unpacking asynchronously</title>
<updated>2021-05-07T07:26:33+00:00</updated>
<author>
<name>Rasmus Villemoes</name>
<email>linux@rasmusvillemoes.dk</email>
</author>
<published>2021-05-07T01:05:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=e7cb072eb988e46295512617c39d004f9e1c26f8'/>
<id>e7cb072eb988e46295512617c39d004f9e1c26f8</id>
<content type='text'>
Patch series "background initramfs unpacking, and CONFIG_MODPROBE_PATH", v3.

These two patches are independent, but better-together.

The second is a rather trivial patch that simply allows the developer to
change "/sbin/modprobe" to something else - e.g.  the empty string, so
that all request_module() during early boot return -ENOENT early, without
even spawning a usermode helper, needlessly synchronizing with the
initramfs unpacking.

The first patch delegates decompressing the initramfs to a worker thread,
allowing do_initcalls() in main.c to proceed to the device_ and late_
initcalls without waiting for that decompression (and populating of
rootfs) to finish.  Obviously, some of those later calls may rely on the
initramfs being available, so I've added synchronization points in the
firmware loader and usermodehelper paths - there might be other places
that would need this, but so far no one has been able to think of any
places I have missed.

There's not much to win if most of the functionality needed during boot is
only available as modules.  But systems with a custom-made .config and
initramfs can boot faster, partly due to utilizing more than one cpu
earlier, partly by avoiding known-futile modprobe calls (which would still
trigger synchronization with the initramfs unpacking, thus eliminating
most of the first benefit).

This patch (of 2):

Most of the boot process doesn't actually need anything from the
initramfs, until of course PID1 is to be executed.  So instead of doing
the decompressing and populating of the initramfs synchronously in
populate_rootfs() itself, push that off to a worker thread.

This is primarily motivated by an embedded ppc target, where unpacking
even the rather modest sized initramfs takes 0.6 seconds, which is long
enough that the external watchdog becomes unhappy that it doesn't get
attention soon enough.  By doing the initramfs decompression in a worker
thread, we get to do the device_initcalls and hence start petting the
watchdog much sooner.

Normal desktops might benefit as well.  On my mostly stock Ubuntu kernel,
my initramfs is a 26M xz-compressed blob, decompressing to around 126M.
That takes almost two seconds:

[    0.201454] Trying to unpack rootfs image as initramfs...
[    1.976633] Freeing initrd memory: 29416K

Before this patch, these lines occur consecutively in dmesg.  With this
patch, the timestamps on these two lines is roughly the same as above, but
with 172 lines inbetween - so more than one cpu has been kept busy doing
work that would otherwise only happen after the populate_rootfs()
finished.

Should one of the initcalls done after rootfs_initcall time (i.e., device_
and late_ initcalls) need something from the initramfs (say, a kernel
module or a firmware blob), it will simply wait for the initramfs
unpacking to be done before proceeding, which should in theory make this
completely safe.

But if some driver pokes around in the filesystem directly and not via one
of the official kernel interfaces (i.e.  request_firmware*(),
call_usermodehelper*) that theory may not hold - also, I certainly might
have missed a spot when sprinkling wait_for_initramfs().  So there is an
escape hatch in the form of an initramfs_async= command line parameter.

Link: https://lkml.kernel.org/r/20210313212528.2956377-1-linux@rasmusvillemoes.dk
Link: https://lkml.kernel.org/r/20210313212528.2956377-2-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Reviewed-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
Cc: Jessica Yu &lt;jeyu@kernel.org&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Jonathan Corbet &lt;corbet@lwn.net&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Cc: Nick Desaulniers &lt;ndesaulniers@google.com&gt;
Cc: Takashi Iwai &lt;tiwai@suse.de&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Patch series "background initramfs unpacking, and CONFIG_MODPROBE_PATH", v3.

These two patches are independent, but better-together.

The second is a rather trivial patch that simply allows the developer to
change "/sbin/modprobe" to something else - e.g.  the empty string, so
that all request_module() during early boot return -ENOENT early, without
even spawning a usermode helper, needlessly synchronizing with the
initramfs unpacking.

The first patch delegates decompressing the initramfs to a worker thread,
allowing do_initcalls() in main.c to proceed to the device_ and late_
initcalls without waiting for that decompression (and populating of
rootfs) to finish.  Obviously, some of those later calls may rely on the
initramfs being available, so I've added synchronization points in the
firmware loader and usermodehelper paths - there might be other places
that would need this, but so far no one has been able to think of any
places I have missed.

There's not much to win if most of the functionality needed during boot is
only available as modules.  But systems with a custom-made .config and
initramfs can boot faster, partly due to utilizing more than one cpu
earlier, partly by avoiding known-futile modprobe calls (which would still
trigger synchronization with the initramfs unpacking, thus eliminating
most of the first benefit).

This patch (of 2):

Most of the boot process doesn't actually need anything from the
initramfs, until of course PID1 is to be executed.  So instead of doing
the decompressing and populating of the initramfs synchronously in
populate_rootfs() itself, push that off to a worker thread.

This is primarily motivated by an embedded ppc target, where unpacking
even the rather modest sized initramfs takes 0.6 seconds, which is long
enough that the external watchdog becomes unhappy that it doesn't get
attention soon enough.  By doing the initramfs decompression in a worker
thread, we get to do the device_initcalls and hence start petting the
watchdog much sooner.

Normal desktops might benefit as well.  On my mostly stock Ubuntu kernel,
my initramfs is a 26M xz-compressed blob, decompressing to around 126M.
That takes almost two seconds:

[    0.201454] Trying to unpack rootfs image as initramfs...
[    1.976633] Freeing initrd memory: 29416K

Before this patch, these lines occur consecutively in dmesg.  With this
patch, the timestamps on these two lines is roughly the same as above, but
with 172 lines inbetween - so more than one cpu has been kept busy doing
work that would otherwise only happen after the populate_rootfs()
finished.

Should one of the initcalls done after rootfs_initcall time (i.e., device_
and late_ initcalls) need something from the initramfs (say, a kernel
module or a firmware blob), it will simply wait for the initramfs
unpacking to be done before proceeding, which should in theory make this
completely safe.

But if some driver pokes around in the filesystem directly and not via one
of the official kernel interfaces (i.e.  request_firmware*(),
call_usermodehelper*) that theory may not hold - also, I certainly might
have missed a spot when sprinkling wait_for_initramfs().  So there is an
escape hatch in the form of an initramfs_async= command line parameter.

Link: https://lkml.kernel.org/r/20210313212528.2956377-1-linux@rasmusvillemoes.dk
Link: https://lkml.kernel.org/r/20210313212528.2956377-2-linux@rasmusvillemoes.dk
Signed-off-by: Rasmus Villemoes &lt;linux@rasmusvillemoes.dk&gt;
Reviewed-by: Luis Chamberlain &lt;mcgrof@kernel.org&gt;
Cc: Jessica Yu &lt;jeyu@kernel.org&gt;
Cc: Borislav Petkov &lt;bp@alien8.de&gt;
Cc: Jonathan Corbet &lt;corbet@lwn.net&gt;
Cc: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
Cc: Nick Desaulniers &lt;ndesaulniers@google.com&gt;
Cc: Takashi Iwai &lt;tiwai@suse.de&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux</title>
<updated>2021-02-26T18:28:35+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2021-02-26T18:28:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=8b83369ddcb3fb9cab5c1088987ce477565bb630'/>
<id>8b83369ddcb3fb9cab5c1088987ce477565bb630</id>
<content type='text'>
Pull RISC-V updates from Palmer Dabbelt:
 "A handful of new RISC-V related patches for this merge window:

   - A check to ensure drivers are properly using uaccess. This isn't
     manifesting with any of the drivers I'm currently using, but may
     catch errors in new drivers.

   - Some preliminary support for the FU740, along with the HiFive
     Unleashed it will appear on.

   - NUMA support for RISC-V, which involves making the arm64 code
     generic.

   - Support for kasan on the vmalloc region.

   - A handful of new drivers for the Kendryte K210, along with the DT
     plumbing required to boot on a handful of K210-based boards.

   - Support for allocating ASIDs.

   - Preliminary support for kernels larger than 128MiB.

   - Various other improvements to our KASAN support, including the
     utilization of huge pages when allocating the KASAN regions.

  We may have already found a bug with the KASAN_VMALLOC code, but it's
  passing my tests. There's a fix in the works, but that will probably
  miss the merge window.

* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
  riscv: Improve kasan population by using hugepages when possible
  riscv: Improve kasan population function
  riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
  riscv: Improve kasan definitions
  riscv: Get rid of MAX_EARLY_MAPPING_SIZE
  soc: canaan: Sort the Makefile alphabetically
  riscv: Disable KSAN_SANITIZE for vDSO
  riscv: Remove unnecessary declaration
  riscv: Add Canaan Kendryte K210 SD card defconfig
  riscv: Update Canaan Kendryte K210 defconfig
  riscv: Add Kendryte KD233 board device tree
  riscv: Add SiPeed MAIXDUINO board device tree
  riscv: Add SiPeed MAIX GO board device tree
  riscv: Add SiPeed MAIX DOCK board device tree
  riscv: Add SiPeed MAIX BiT board device tree
  riscv: Update Canaan Kendryte K210 device tree
  dt-bindings: add resets property to dw-apb-timer
  dt-bindings: fix sifive gpio properties
  dt-bindings: update sifive uart compatible string
  dt-bindings: update sifive clint compatible string
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull RISC-V updates from Palmer Dabbelt:
 "A handful of new RISC-V related patches for this merge window:

   - A check to ensure drivers are properly using uaccess. This isn't
     manifesting with any of the drivers I'm currently using, but may
     catch errors in new drivers.

   - Some preliminary support for the FU740, along with the HiFive
     Unleashed it will appear on.

   - NUMA support for RISC-V, which involves making the arm64 code
     generic.

   - Support for kasan on the vmalloc region.

   - A handful of new drivers for the Kendryte K210, along with the DT
     plumbing required to boot on a handful of K210-based boards.

   - Support for allocating ASIDs.

   - Preliminary support for kernels larger than 128MiB.

   - Various other improvements to our KASAN support, including the
     utilization of huge pages when allocating the KASAN regions.

  We may have already found a bug with the KASAN_VMALLOC code, but it's
  passing my tests. There's a fix in the works, but that will probably
  miss the merge window.

* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
  riscv: Improve kasan population by using hugepages when possible
  riscv: Improve kasan population function
  riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
  riscv: Improve kasan definitions
  riscv: Get rid of MAX_EARLY_MAPPING_SIZE
  soc: canaan: Sort the Makefile alphabetically
  riscv: Disable KSAN_SANITIZE for vDSO
  riscv: Remove unnecessary declaration
  riscv: Add Canaan Kendryte K210 SD card defconfig
  riscv: Update Canaan Kendryte K210 defconfig
  riscv: Add Kendryte KD233 board device tree
  riscv: Add SiPeed MAIXDUINO board device tree
  riscv: Add SiPeed MAIX GO board device tree
  riscv: Add SiPeed MAIX DOCK board device tree
  riscv: Add SiPeed MAIX BiT board device tree
  riscv: Update Canaan Kendryte K210 device tree
  dt-bindings: add resets property to dw-apb-timer
  dt-bindings: fix sifive gpio properties
  dt-bindings: update sifive uart compatible string
  dt-bindings: update sifive clint compatible string
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>initramfs: panic with memory information</title>
<updated>2021-02-26T17:41:05+00:00</updated>
<author>
<name>Florian Fainelli</name>
<email>f.fainelli@gmail.com</email>
</author>
<published>2021-02-26T01:22:46+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=dd23e8098f33a55b22b869bc7fc0a795ccbb9f87'/>
<id>dd23e8098f33a55b22b869bc7fc0a795ccbb9f87</id>
<content type='text'>
On systems with large amounts of reserved memory we may fail to
successfully complete unpack_to_rootfs() and be left with:

 Kernel panic - not syncing: write error

this is not too helpful to understand what happened, so let's wrap the
panic() calls with a surrounding show_mem() such that we have a chance of
understanding the memory conditions leading to these allocation failures.

[akpm@linux-foundation.org: replace macro with C function]

Link: https://lkml.kernel.org/r/20210114231517.1854379-1-f.fainelli@gmail.com
Signed-off-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: Barret Rhoden &lt;brho@google.com&gt;
Cc: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
On systems with large amounts of reserved memory we may fail to
successfully complete unpack_to_rootfs() and be left with:

 Kernel panic - not syncing: write error

this is not too helpful to understand what happened, so let's wrap the
panic() calls with a surrounding show_mem() such that we have a chance of
understanding the memory conditions leading to these allocation failures.

[akpm@linux-foundation.org: replace macro with C function]

Link: https://lkml.kernel.org/r/20210114231517.1854379-1-f.fainelli@gmail.com
Signed-off-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;
Cc: Barret Rhoden &lt;brho@google.com&gt;
Cc: Arnd Bergmann &lt;arnd@arndb.de&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>initramfs: Provide a common initrd reserve function</title>
<updated>2021-02-19T07:17:57+00:00</updated>
<author>
<name>Kefeng Wang</name>
<email>wangkefeng.wang@huawei.com</email>
</author>
<published>2021-01-15T05:46:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=c72160fe05fb978ad859ba053c4462c2bb960b13'/>
<id>c72160fe05fb978ad859ba053c4462c2bb960b13</id>
<content type='text'>
Some architectures(eg, ARM and riscv) have similar logic to
check and reserve the memory of initrd, let's provide a common
function reserve_initrd_mem() to reduce duplicated code.

Signed-off-by: Kefeng Wang &lt;wangkefeng.wang@huawei.com&gt;
Signed-off-by: Palmer Dabbelt &lt;palmerdabbelt@google.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Some architectures(eg, ARM and riscv) have similar logic to
check and reserve the memory of initrd, let's provide a common
function reserve_initrd_mem() to reduce duplicated code.

Signed-off-by: Kefeng Wang &lt;wangkefeng.wang@huawei.com&gt;
Signed-off-by: Palmer Dabbelt &lt;palmerdabbelt@google.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>initramfs: fix clang build failure</title>
<updated>2020-12-11T22:02:14+00:00</updated>
<author>
<name>Arnd Bergmann</name>
<email>arnd@arndb.de</email>
</author>
<published>2020-12-11T21:36:42+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=55d5b7dd6451b58489ce384282ca5a4a289eb8d5'/>
<id>55d5b7dd6451b58489ce384282ca5a4a289eb8d5</id>
<content type='text'>
There is only one function in init/initramfs.c that is in the .text
section, and it is marked __weak.  When building with clang-12 and the
integrated assembler, this leads to a bug with recordmcount:

  ./scripts/recordmcount  "init/initramfs.o"
  Cannot find symbol for section 2: .text.
  init/initramfs.o: failed

I'm not quite sure what exactly goes wrong, but I notice that this
function is only ever called from an __init function, and normally
inlined.  Marking it __init as well is clearly correct and it leads to
recordmcount no longer complaining.

Link: https://lkml.kernel.org/r/20201204165742.3815221-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Cc: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Cc: Nick Desaulniers &lt;ndesaulniers@google.com&gt;
Cc: Barret Rhoden &lt;brho@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
There is only one function in init/initramfs.c that is in the .text
section, and it is marked __weak.  When building with clang-12 and the
integrated assembler, this leads to a bug with recordmcount:

  ./scripts/recordmcount  "init/initramfs.o"
  Cannot find symbol for section 2: .text.
  init/initramfs.o: failed

I'm not quite sure what exactly goes wrong, but I notice that this
function is only ever called from an __init function, and normally
inlined.  Marking it __init as well is clearly correct and it leads to
recordmcount no longer complaining.

Link: https://lkml.kernel.org/r/20201204165742.3815221-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Cc: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Cc: Nick Desaulniers &lt;ndesaulniers@google.com&gt;
Cc: Barret Rhoden &lt;brho@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>init: fix error check in clean_path()</title>
<updated>2020-09-04T16:16:58+00:00</updated>
<author>
<name>Barret Rhoden</name>
<email>brho@google.com</email>
</author>
<published>2020-09-04T13:53:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=7b81ce7cdcef3a3ae71eb3fb863433c646b4a2f4'/>
<id>7b81ce7cdcef3a3ae71eb3fb863433c646b4a2f4</id>
<content type='text'>
init_stat() returns 0 on success, same as vfs_lstat().  When it replaced
vfs_lstat(), the '!' was dropped.

Fixes: 716308a5331b ("init: add an init_stat helper")
Signed-off-by: Barret Rhoden &lt;brho@google.com&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
init_stat() returns 0 on success, same as vfs_lstat().  When it replaced
vfs_lstat(), the '!' was dropped.

Fixes: 716308a5331b ("init: add an init_stat helper")
Signed-off-by: Barret Rhoden &lt;brho@google.com&gt;
Reviewed-by: Christoph Hellwig &lt;hch@lst.de&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>init: add an init_utimes helper</title>
<updated>2020-07-31T06:17:54+00:00</updated>
<author>
<name>Christoph Hellwig</name>
<email>hch@lst.de</email>
</author>
<published>2020-07-21T14:05:31+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=235e57935bf328c4cce371ffc4dd1d8fab4885cd'/>
<id>235e57935bf328c4cce371ffc4dd1d8fab4885cd</id>
<content type='text'>
Add a simple helper to set timestamps with a kernel space file name and
switch the early init code over to it.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a simple helper to set timestamps with a kernel space file name and
switch the early init code over to it.

Signed-off-by: Christoph Hellwig &lt;hch@lst.de&gt;
</pre>
</div>
</content>
</entry>
</feed>
