Pull tracing and bootconfig updates:
 "Fixes and changes to bootconfig before it goes live in a release.

  Change in API of bootconfig (before it comes live in a release):
  - Have a magic value "BOOTCONFIG" in initrd to know a bootconfig
    exists
  - Set CONFIG_BOOT_CONFIG to 'n' by default
  - Show error if "bootconfig" on cmdline but not compiled in
  - Prevent redefining the same value
  - Have a way to append values
  - Added a SELECT BLK_DEV_INITRD to fix a build failure

  Synthetic event fixes:
  - Switch to raw_smp_processor_id() for recording CPU value in preempt
    section. (No care for what the value actually is)
  - Fix samples always recording u64 values
  - Fix endianess
  - Check number of values matches number of fields
  - Fix a printing bug

  Fix of trace_printk() breaking postponed start up tests

  Make a function static that is only used in a single file"

* tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue
  bootconfig: Add append value operator support
  bootconfig: Prohibit re-defining value on same key
  bootconfig: Print array as multiple commands for legacy command line
  bootconfig: Reject subkey and value on same parent key
  tools/bootconfig: Remove unneeded error message silencer
  bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
  bootconfig: Set CONFIG_BOOT_CONFIG=n by default
  tracing: Clear trace_state when starting trace
  bootconfig: Mark boot_config_checksum() static
  tracing: Disable trace_printk() on post poned tests
  tracing: Have synthetic event test use raw_smp_processor_id()
  tracing: Fix number printing bug in print_synth_event()
  tracing: Check that number of vals matches number of synth event fields
  tracing: Make synth_event trace functions endian-correct
  tracing: Make sure synth_event_trace() example always uses u64

Print arraied values as multiple same options for legacy
kernel command line. With this rule, if the "kernel.*" and
"init.*" array entries in bootconfig are printed out as
multiple same options, e.g.

kernel {
 console = "ttyS0,115200"
 console += "tty0"
}

will be correctly converted to

console="ttyS0,115200" console="tty0"

in the kernel command line.

Link: http://lkml.kernel.org/r/158220118213.26565.8163300497009463916.stgit@devnote2

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add bootconfig magic word to the end of bootconfig on initrd
image for indicating explicitly the bootconfig is there.
Also tools/bootconfig treats wrong size or wrong checksum or
parse error as an error, because if there is a bootconfig magic
word, there must be a bootconfig.

The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word.
Thus the block image of the initrd file with bootconfig is
as follows.

[Initrd][bootconfig][size][csum][#BOOTCONFIG\n]

Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Set CONFIG_BOOT_CONFIG=n by default. This also warns
user if CONFIG_BOOT_CONFIG=n but "bootconfig" is given
in the kernel command line.

Link: http://lkml.kernel.org/r/158220111291.26565.9036889083940367969.stgit@devnote2

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

In fact, this function is only used in this file, so mark it with 'static'.

Link: http://lkml.kernel.org/r/1581852511-14163-1-git-send-email-hqjagain@gmail.com

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull tracing fixes from Steven Rostedt:
 "Various fixes:

   - Fix an uninitialized variable

   - Fix compile bug to bootconfig userspace tool (in tools directory)

   - Suppress some error messages of bootconfig userspace tool

   - Remove unneded CONFIG_LIBXBC from bootconfig

   - Allocate bootconfig xbc_nodes dynamically. To ease complaints about
     taking up static memory at boot up

   - Use of parse_args() to parse bootconfig instead of strstr() usage
     Prevents issues of double quotes containing the interested string

   - Fix missing ring_buffer_nest_end() on synthetic event error path

   - Return zero not -EINVAL on soft disabled synthetic event (soft
     disabling must be the same as hard disabling, which returns zero)

   - Consolidate synthetic event code (remove duplicate code)"

* tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Consolidate trace() functions
  tracing: Don't return -EINVAL when tracing soft disabled synth events
  tracing: Add missing nest end to synth_event_trace_start() error case
  tools/bootconfig: Suppress non-error messages
  bootconfig: Allocate xbc_nodes array dynamically
  bootconfig: Use parse_args() to find bootconfig and '--'
  tracing/kprobe: Fix uninitialized variable bug
  bootconfig: Remove unneeded CONFIG_LIBXBC
  tools/bootconfig: Fix wrong __VA_ARGS__ usage

The current implementation does a naive search of "bootconfig" on the kernel
command line. But this could find "bootconfig" that is part of another
option in quotes (although highly unlikely). But it also needs to find '--'
on the kernel command line to know if it should append a '--' or not when a
bootconfig in the initrd file has an "init" section. The check uses the
naive strstr() to find to see if it exists. But this can return a false
positive if it exists in an option and then the "init" section in the initrd
will not be appended properly.

Using parse_args() to find both of these will solve both of these problems.

Link: https://lore.kernel.org/r/202002070954.C18E7F58B@keescook

Fixes: 7495e0926fdf3 ("bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline")
Fixes: 1319916209ce8 ("bootconfig: init: Allow admin to use bootconfig for init command line")
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull tracing updates from Steven Rostedt:

 - Added new "bootconfig".

   This looks for a file appended to initrd to add boot config options,
   and has been discussed thoroughly at Linux Plumbers.

   Very useful for adding kprobes at bootup.

   Only enabled if "bootconfig" is on the real kernel command line.

 - Created dynamic event creation.

   Merges common code between creating synthetic events and kprobe
   events.

 - Rename perf "ring_buffer" structure to "perf_buffer"

 - Rename ftrace "ring_buffer" structure to "trace_buffer"

   Had to rename existing "trace_buffer" to "array_buffer"

 - Allow trace_printk() to work withing (some) tracing code.

 - Sort of tracing configs to be a little better organized

 - Fixed bug where ftrace_graph hash was not being protected properly

 - Various other small fixes and clean ups

* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
  bootconfig: Show the number of nodes on boot message
  tools/bootconfig: Show the number of bootconfig nodes
  bootconfig: Add more parse error messages
  bootconfig: Use bootconfig instead of boot config
  ftrace: Protect ftrace_graph_hash with ftrace_sync
  ftrace: Add comment to why rcu_dereference_sched() is open coded
  tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
  tracing: Annotate ftrace_graph_hash pointer with __rcu
  bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
  tracing: Use seq_buf for building dynevent_cmd string
  tracing: Remove useless code in dynevent_arg_pair_add()
  tracing: Remove check_arg() callbacks from dynevent args
  tracing: Consolidate some synth_event_trace code
  tracing: Fix now invalid var_ref_vals assumption in trace action
  tracing: Change trace_boot to use synth_event interface
  tracing: Move tracing selftests to bottom of menu
  tracing: Move mmio tracer config up with the other tracers
  tracing: Move tracing test module configs together
  tracing: Move all function tracing configs together
  tracing: Documentation for in-kernel synthetic event API
  ...

Show the number of bootconfig nodes on boot message.

Link: http://lkml.kernel.org/r/158091062297.27924.9051634676068550285.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Use "bootconfig" (1 word) instead of "boot config" (2 words)
in the boot message.

Link: http://lkml.kernel.org/r/158091059459.27924.14414336187441539879.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>