linux-toradex.git/init, branch v2.6.19-rc1

Remove all inclusions of

2006-10-04T07:38:54+00:00

kbuild explicitly includes this at build time.

Signed-off-by: Dave Jones

[PATCH] md: remove MAX_MD_DEVS which is an arbitrary limit

2006-10-03T15:04:18+00:00

Once upon a time we needed to fixed limit to the number of md devices,
probably because we preallocated some array.  This need no longer exists, but
we still have an arbitrary limit.

So remove MAX_MD_DEVS and allow as many devices as we can fit into the 'minor'
part of a device number.

Also remove some useless noise at init time (which reports MAX_MD_DEVS) and
remove MD_THREAD_NAME_MAX which hasn't been used for a while.

Signed-off-by: Neil Brown 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] replace cad_pid by a struct pid

2006-10-02T14:57:25+00:00

There are a few places in the kernel where the init task is signaled.  The
ctrl+alt+del sequence is one them.  It kills a task, usually init, using a
cached pid (cad_pid).

This patch replaces the pid_t by a struct pid to avoid pid wrap around
problem.  The struct pid is initialized at boot time in init() and can be
modified through systctl with

	/proc/sys/kernel/cad_pid

[ I haven't found any distro using it ? ]

It also introduces a small helper routine kill_cad_pid() which is used
where it seemed ok to use cad_pid instead of pid 1.

[akpm@osdl.org: cleanups, build fix]
Signed-off-by: Cedric Le Goater 
Cc: Eric W. Biederman 
Cc: Martin Schwidefsky 
Cc: Paul Mackerras 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] introduce kernel_execve

2006-10-02T14:57:23+00:00

The use of execve() in the kernel is dubious, since it relies on the
__KERNEL_SYSCALLS__ mechanism that stores the result in a global errno
variable.  As a first step of getting rid of this, change all users to a
global kernel_execve function that returns a proper error code.

This function is a terrible hack, and a later patch removes it again after the
kernel syscalls are gone.

Signed-off-by: Arnd Bergmann 
Cc: Andi Kleen 
Cc: Paul Mackerras 
Cc: Benjamin Herrenschmidt 
Cc: Richard Henderson 
Cc: Ivan Kokshaysky 
Cc: Russell King 
Cc: Ian Molton 
Cc: Mikael Starvik 
Cc: David Howells 
Cc: Yoshinori Sato 
Cc: Hirokazu Takata 
Cc: Ralf Baechle 
Cc: Kyle McMartin 
Cc: Heiko Carstens 
Cc: Martin Schwidefsky 
Cc: Paul Mundt 
Cc: Kazumoto Kojima 
Cc: Richard Curnow 
Cc: William Lee Irwin III 
Cc: "David S. Miller" 
Cc: Jeff Dike 
Cc: Paolo 'Blaisorblade' Giarrusso 
Cc: Miles Bader 
Cc: Chris Zankel 
Cc: "Luck, Tony" 
Cc: Geert Uytterhoeven 
Cc: Roman Zippel 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] IPC namespace core

2006-10-02T14:57:22+00:00

This patch set allows to unshare IPCs and have a private set of IPC objects
(sem, shm, msg) inside namespace.  Basically, it is another building block of
containers functionality.

This patch implements core IPC namespace changes:
- ipc_namespace structure
- new config option CONFIG_IPC_NS
- adds CLONE_NEWIPC flag
- unshare support

[clg@fr.ibm.com: small fix for unshare of ipc namespace]
[akpm@osdl.org: build fix]
Signed-off-by: Pavel Emelianov 
Signed-off-by: Kirill Korotaev 
Signed-off-by: Cedric Le Goater 
Cc: "Eric W. Biederman" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] namespaces: utsname: implement utsname namespaces

2006-10-02T14:57:21+00:00

This patch defines the uts namespace and some manipulators.
Adds the uts namespace to task_struct, and initializes a
system-wide init namespace.

It leaves a #define for system_utsname so sysctl will compile.
This define will be removed in a separate patch.

[akpm@osdl.org: build fix, cleanup]
Signed-off-by: Serge Hallyn 
Cc: Kirill Korotaev 
Cc: "Eric W. Biederman" 
Cc: Herbert Poetzl 
Cc: Andrey Savochkin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] csa: Extended system accounting over taskstats

2006-10-01T07:39:29+00:00

Add extended system accounting handling over taskstats interface.  A
CONFIG_TASK_XACCT flag is created to enable the extended accounting code.

Signed-off-by: Jay Lan 
Cc: Shailabh Nagar 
Cc: Balbir Singh 
Cc: Jes Sorensen 
Cc: Chris Sturtivant 
Cc: Tony Ernst 
Cc: Guillaume Thouvenin 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] fix EMBEDDED + SYSCTL menu

2006-10-01T07:39:25+00:00

SYSCTL should still depend on EMBEDDED.  This unbreaks the EMBEDDED menu
(from the recent SYSCTL_SYCALL menu option patch).

Fix typos in new SYSCTL_SYSCALL menu.

Signed-off-by: Randy Dunlap 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] allow /proc/config.gz to be built as a module

2006-10-01T07:39:20+00:00

The driver for /proc/config.gz consumes rather a lot of memory and it is in
fact possible to build it as a module.

In some ways this is a bit risky, because the .config which is used for
compiling kernel/configs.c isn't necessarily the same as the .config which was
used to build vmlinux.

But OTOH the potential memory savings are decent, and it'd be fairly dumb to
build your configs.o with a different .config.

Signed-off-by: Andrew Morton 
Cc: "Randy.Dunlap" 
Cc: Sam Ravnborg 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] BLOCK: Make it possible to disable the block layer [try #6]

2006-09-30T18:52:31+00:00

Make it possible to disable the block layer.  Not all embedded devices require
it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require
the block layer to be present.

This patch does the following:

 (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev
     support.

 (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls
     an item that uses the block layer.  This includes:

     (*) Block I/O tracing.

     (*) Disk partition code.

     (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS.

     (*) The SCSI layer.  As far as I can tell, even SCSI chardevs use the
     	 block layer to do scheduling.  Some drivers that use SCSI facilities -
     	 such as USB storage - end up disabled indirectly from this.

     (*) Various block-based device drivers, such as IDE and the old CDROM
     	 drivers.

     (*) MTD blockdev handling and FTL.

     (*) JFFS - which uses set_bdev_super(), something it could avoid doing by
     	 taking a leaf out of JFFS2's book.

 (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and
     linux/elevator.h contingent on CONFIG_BLOCK being set.  sector_div() is,
     however, still used in places, and so is still available.

 (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and
     parts of linux/fs.h.

 (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK.

 (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK.

 (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK
     is not enabled.

 (*) fs/no-block.c is created to hold out-of-line stubs and things that are
     required when CONFIG_BLOCK is not set:

     (*) Default blockdev file operations (to give error ENODEV on opening).

 (*) Makes some /proc changes:

     (*) /proc/devices does not list any blockdevs.

     (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK.

 (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK.

 (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if
     given command other than Q_SYNC or if a special device is specified.

 (*) In init/do_mounts.c, no reference is made to the blockdev routines if
     CONFIG_BLOCK is not defined.  This does not prohibit NFS roots or JFFS2.

 (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return
     error ENOSYS by way of cond_syscall if so).

 (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if
     CONFIG_BLOCK is not set, since they can't then happen.

Signed-Off-By: David Howells 
Signed-off-by: Jens Axboe