linux-toradex.git/ipc/shm.c, branch v5.5-rc7

ipc: rename old-style shmctl/semctl/msgctl syscalls

2019-01-25T16:22:50+00:00

The behavior of these system calls is slightly different between
architectures, as determined by the CONFIG_ARCH_WANT_IPC_PARSE_VERSION
symbol. Most architectures that implement the split IPC syscalls don't set
that symbol and only get the modern version, but alpha, arm, microblaze,
mips-n32, mips-n64 and xtensa expect the caller to pass the IPC_64 flag.

For the architectures that so far only implement sys_ipc(), i.e. m68k,
mips-o32, powerpc, s390, sh, sparc, and x86-32, we want the new behavior
when adding the split syscalls, so we need to distinguish between the
two groups of architectures.

The method I picked for this distinction is to have a separate system call
entry point: sys_old_*ctl() now uses ipc_parse_version, while sys_*ctl()
does not. The system call tables of the five architectures are changed
accordingly.

As an additional benefit, we no longer need the configuration specific
definition for ipc_parse_version(), it always does the same thing now,
but simply won't get called on architectures with the modern interface.

A small downside is that on architectures that do set
ARCH_WANT_IPC_PARSE_VERSION, we now have an extra set of entry points
that are never called. They only add a few bytes of bloat, so it seems
better to keep them compared to adding yet another Kconfig symbol.
I considered adding new syscall numbers for the IPC_64 variants for
consistency, but decided against that for now.

Signed-off-by: Arnd Bergmann

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-10-25T18:14:36+00:00

Pull timekeeping updates from Thomas Gleixner:
 "The timers and timekeeping departement provides:

   - Another large y2038 update with further preparations for providing
     the y2038 safe timespecs closer to the syscalls.

   - An overhaul of the SHCMT clocksource driver

   - SPDX license identifier updates

   - Small cleanups and fixes all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  tick/sched : Remove redundant cpu_online() check
  clocksource/drivers/dw_apb: Add reset control
  clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE
  clocksource/drivers: Unify the names to timer-* format
  clocksource/drivers/sh_cmt: Add R-Car gen3 support
  dt-bindings: timer: renesas: cmt: document R-Car gen3 support
  clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer
  clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines
  clocksource/drivers/sh_cmt: Fixup for 64-bit machines
  clocksource/drivers/sh_tmu: Convert to SPDX identifiers
  clocksource/drivers/sh_mtu2: Convert to SPDX identifiers
  clocksource/drivers/sh_cmt: Convert to SPDX identifiers
  clocksource/drivers/renesas-ostm: Convert to SPDX identifiers
  clocksource: Convert to using %pOFn instead of device_node.name
  tick/broadcast: Remove redundant check
  RISC-V: Request newstat syscalls
  y2038: signal: Change rt_sigtimedwait to use __kernel_timespec
  y2038: socket: Change recvmmsg to use __kernel_timespec
  y2038: sched: Change sched_rr_get_interval to use __kernel_timespec
  y2038: utimes: Rework #ifdef guards for compat syscalls
  ...

ipc/shm.c: use ERR_CAST() for shm_lock() error return

2018-10-05T23:32:04+00:00

This uses ERR_CAST() instead of an open-coded cast, as it is casting
across structure pointers, which upsets __randomize_layout:

ipc/shm.c: In function `shm_lock':
ipc/shm.c:209:9: note: randstruct: casting between randomized structure pointer types (ssa): `struct shmid_kernel' and `struct kern_ipc_perm'

  return (void *)ipcp;
         ^~~~~~~~~~~~

Link: http://lkml.kernel.org/r/20180919180722.GA15073@beast
Fixes: 82061c57ce93 ("ipc: drop ipc_lock()")
Signed-off-by: Kees Cook 
Cc: Davidlohr Bueso 
Cc: Manfred Spraul 
Cc: Arnd Bergmann 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

ipc/shm: properly return EIDRM in shm_lock()

2018-09-04T23:45:02+00:00

When getting rid of the general ipc_lock(), this was missed furthermore,
making the comment around the ipc object validity check bogus.  Under
EIDRM conditions, callers will in turn not see the error and continue
with the operation.

Link: http://lkml.kernel.org/r/20180824030920.GD3677@linux-r8p5
Link: http://lkml.kernel.org/r/20180823024051.GC13343@shao2-debian
Fixes: 82061c57ce9 ("ipc: drop ipc_lock()")
Signed-off-by: Davidlohr Bueso 
Reported-by: kernel test robot 
Cc: Manfred Spraul 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

y2038: globally rename compat_time to old_time32

2018-08-27T12:48:48+00:00

Christoph Hellwig suggested a slightly different path for handling
backwards compatibility with the 32-bit time_t based system calls:

Rather than simply reusing the compat_sys_* entry points on 32-bit
architectures unchanged, we get rid of those entry points and the
compat_time types by renaming them to something that makes more sense
on 32-bit architectures (which don't have a compat mode otherwise),
and then share the entry points under the new name with the 64-bit
architectures that use them for implementing the compatibility.

The following types and interfaces are renamed here, and moved
from linux/compat_time.h to linux/time32.h:

old				new
---				---
compat_time_t			old_time32_t
struct compat_timeval		struct old_timeval32
struct compat_timespec		struct old_timespec32
struct compat_itimerspec	struct old_itimerspec32
ns_to_compat_timeval()		ns_to_old_timeval32()
get_compat_itimerspec64()	get_old_itimerspec32()
put_compat_itimerspec64()	put_old_itimerspec32()
compat_get_timespec64()		get_old_timespec32()
compat_put_timespec64()		put_old_timespec32()

As we already have aliases in place, this patch addresses only the
instances that are relevant to the system call interface in particular,
not those that occur in device drivers and other modules. Those
will get handled separately, while providing the 64-bit version
of the respective interfaces.

I'm not renaming the timex, rusage and itimerval structures, as we are
still debating what the new interface will look like, and whether we
will need a replacement at all.

This also doesn't change the names of the syscall entry points, which can
be done more easily when we actually switch over the 32-bit architectures
to use them, at that point we need to change COMPAT_SYSCALL_DEFINEx to
SYSCALL_DEFINEx with a new name, e.g. with a _time32 suffix.

Suggested-by: Christoph Hellwig 
Link: https://lore.kernel.org/lkml/20180705222110.GA5698@infradead.org/
Signed-off-by: Arnd Bergmann

ipc/util.c: further variable name cleanups

2018-08-22T17:52:52+00:00

The varable names got a mess, thus standardize them again:

id: user space id. Called semid, shmid, msgid if the type is known.
    Most functions use "id" already.
idx: "index" for the idr lookup
    Right now, some functions use lid, ipc_addid() already uses idx as
    the variable name.
seq: sequence number, to avoid quick collisions of the user space id
key: user space key, used for the rhash tree

Link: http://lkml.kernel.org/r/20180712185241.4017-12-manfred@colorfullife.com
Signed-off-by: Manfred Spraul 
Cc: Dmitry Vyukov 
Cc: Davidlohr Bueso 
Cc: Davidlohr Bueso 
Cc: Herbert Xu 
Cc: Kees Cook 
Cc: Michael Kerrisk 
Cc: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ipc: simplify ipc initialization

2018-08-22T17:52:52+00:00

Now that we know that rhashtable_init() will not fail, we can get rid of a
lot of the unnecessary cleanup paths when the call errored out.

[manfred@colorfullife.com: variable name added to util.h to resolve checkpatch warning]
Link: http://lkml.kernel.org/r/20180712185241.4017-11-manfred@colorfullife.com
Signed-off-by: Davidlohr Bueso 
Signed-off-by: Manfred Spraul 
Cc: Dmitry Vyukov 
Cc: Herbert Xu 
Cc: Kees Cook 
Cc: Michael Kerrisk 
Cc: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ipc: drop ipc_lock()

2018-08-22T17:52:52+00:00

ipc/util.c contains multiple functions to get the ipc object pointer given
an id number.

There are two sets of function: One set verifies the sequence counter part
of the id number, other functions do not check the sequence counter.

The standard for function names in ipc/util.c is
- ..._check() functions verify the sequence counter
- ..._idr() functions do not verify the sequence counter

ipc_lock() is an exception: It does not verify the sequence counter value,
but this is not obvious from the function name.

Furthermore, shm.c is the only user of this helper.  Thus, we can simply
move the logic into shm_lock() and get rid of the function altogether.

[manfred@colorfullife.com: most of changelog]
Link: http://lkml.kernel.org/r/20180712185241.4017-7-manfred@colorfullife.com
Signed-off-by: Davidlohr Bueso 
Signed-off-by: Manfred Spraul 
Cc: Dmitry Vyukov 
Cc: Herbert Xu 
Cc: Kees Cook 
Cc: Michael Kerrisk 
Cc: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ipc: rename ipcctl_pre_down_nolock()

2018-08-22T17:52:51+00:00

Both the comment and the name of ipcctl_pre_down_nolock() are misleading:
The function must be called while holdling the rw semaphore.

Therefore the patch renames the function to ipcctl_obtain_check(): This
name matches the other names used in util.c:

- "obtain" function look up a pointer in the idr, without
  acquiring the object lock.
- The caller is responsible for locking.
- _check means that the sequence number is checked.

Link: http://lkml.kernel.org/r/20180712185241.4017-5-manfred@colorfullife.com
Signed-off-by: Manfred Spraul 
Reviewed-by: Davidlohr Bueso 
Cc: Davidlohr Bueso 
Cc: Dmitry Vyukov 
Cc: Herbert Xu 
Cc: Kees Cook 
Cc: Michael Kerrisk 
Cc: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ipc/util.c: use ipc_rcu_putref() for failues in ipc_addid()

2018-08-22T17:52:51+00:00

ipc_addid() is impossible to use:
- for certain failures, the caller must not use ipc_rcu_putref(),
  because the reference counter is not yet initialized.
- for other failures, the caller must use ipc_rcu_putref(),
  because parallel operations could be ongoing already.

The patch cleans that up, by initializing the refcount early, and by
modifying all callers.

The issues is related to the finding of
syzbot+2827ef6b3385deb07eaf@syzkaller.appspotmail.com: syzbot found an
issue with reading kern_ipc_perm.seq, here both read and write to already
released memory could happen.

Link: http://lkml.kernel.org/r/20180712185241.4017-4-manfred@colorfullife.com
Signed-off-by: Manfred Spraul 
Cc: Dmitry Vyukov 
Cc: Kees Cook 
Cc: Davidlohr Bueso 
Cc: Davidlohr Bueso 
Cc: Herbert Xu 
Cc: Michael Kerrisk 
Cc: Michal Hocko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds