linux-toradex.git/ipc, branch colibri

Do 'shm_init_ns()' in an early pure_initcall

2011-08-05T05:35:59+00:00

This isn't really critical any more, since other patches (commit
298507d4d2cf: "shm: optimize exit_shm()") have caused us to not actually
need to touch the rw_mutex unless there are actual shm segments
associated with the namespace, but we really should do tne shm_init_ns()
earlier than we do now.

This, together with commit 288d5abec831 ("Boot up with usermodehelper
disabled") will mean that we really do initialize the initial ipc
namespace data structure before we run any tasks.

Tested-by: Marc Zyngier 
Signed-off-by: Linus Torvalds

shm: optimize exit_shm()

2011-08-04T00:45:55+00:00

We may optimistically check .in_use == 0 without holding the rw_mutex:
it's the common case, and if it's zero, there certainly won't be any
segments associated with us.

After taking the lock, the idr_for_each() will do the right thing, so we
could now drop the re-check inside the lock without any real cost.  But
it won't hurt.

Signed-off-by: Vasiliy Kulikov 
Signed-off-by: Linus Torvalds

shm: fix wrong tests

2011-08-04T00:45:55+00:00

Commit 4c677e2eefdb ("shm: optimize locking and ipc_namespace getting")
introduced a copy-paste bug.  Due to the bug cycle optimizations were
disabled.

Signed-off-by: Vasiliy Kulikov 
Signed-off-by: Linus Torvalds

shm: optimize locking and ipc_namespace getting

2011-07-30T18:44:20+00:00

shm_lock() does a lookup of shm segment in shm_ids(ns).ipcs_idr, which
is redundant as we already know shmid_kernel address.  An actual lock is
also not required for reads until we really want to destroy the segment.

exit_shm() and shm_destroy_orphaned() may avoid the loop by checking
whether there is at least one segment in current ipc_namespace.

The check of nsproxy and ipc_ns against NULL is redundant as exit_shm()
is called from do_exit() before the call to exit_notify(), so the
dereferencing current->nsproxy->ipc_ns is guaranteed to be safe.

Reported-by: Oleg Nesterov 
Signed-off-by: Vasiliy Kulikov 
Acked-by: Serge Hallyn 
Signed-off-by: Linus Torvalds

shm: handle separate PID namespaces case

2011-07-30T18:44:19+00:00

shm_try_destroy_orphaned() and shm_try_destroy_current() didn't handle
the case of separate PID namespaces, but a single IPC namespace.  If
there are tasks with the same PID values using the same shmem object,
the wrong destroy decision could be reached.

On shm segment creation store the pointer to the creator task in
shmid_kernel->shm_creator field and zero it on task exit.  Then
use the ->shm_creator insread of shm_cprid in both functions.  As
shmid_kernel object is already locked at this stage, no additional
locking is needed.

Signed-off-by: Vasiliy Kulikov 
Acked-by: Serge Hallyn 
Signed-off-by: Linus Torvalds

ipc: introduce shm_rmid_forced sysctl

2011-07-26T23:49:44+00:00

Add support for the shm_rmid_forced sysctl.  If set to 1, all shared
memory objects in current ipc namespace will be automatically forced to
use IPC_RMID.

The POSIX way of handling shmem allows one to create shm objects and
call shmdt(), leaving shm object associated with no process, thus
consuming memory not counted via rlimits.

With shm_rmid_forced=1 the shared memory object is counted at least for
one process, so OOM killer may effectively kill the fat process holding
the shared memory.

It obviously breaks POSIX - some programs relying on the feature would
stop working.  So set shm_rmid_forced=1 only if you're sure nobody uses
"orphaned" memory.  Use shm_rmid_forced=0 by default for compatability
reasons.

The feature was previously impemented in -ow as a configure option.

[akpm@linux-foundation.org: fix documentation, per Randy]
[akpm@linux-foundation.org: fix warning]
[akpm@linux-foundation.org: readability/conventionality tweaks]
[akpm@linux-foundation.org: fix shm_rmid_forced/shm_forced_rmid confusion, use standard comment layout]
Signed-off-by: Vasiliy Kulikov 
Cc: Randy Dunlap 
Cc: "Eric W. Biederman" 
Cc: "Serge E. Hallyn" 
Cc: Daniel Lezcano 
Cc: Oleg Nesterov 
Cc: Tejun Heo 
Cc: Ingo Molnar 
Cc: Alan Cox 
Cc: Solar Designer 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ipc/mqueue.c: fix mq_open() return value

2011-07-26T23:49:44+00:00

We return ENOMEM from mqueue_get_inode even when we have enough memory.
Namely in case the system rlimit of mqueue was reached.  This error
propagates to mq_queue and user sees the error unexpectedly.  So fix
this up to properly return EMFILE as described in the manpage:

	EMFILE The process already has the maximum number of files and
	       message queues open.

instead of:

	ENOMEM Insufficient memory.

With the previous patch we just switch to ERR_PTR/PTR_ERR/IS_ERR error
handling here.

Signed-off-by: Jiri Slaby 
Cc: Manfred Spraul 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ipc/mqueue.c: refactor failure handling

2011-07-26T23:49:44+00:00

If new_inode fails to allocate an inode we need only to return with
NULL.  But now we test the opposite and have all the work in a nested
block.  So do the opposite to save one indentation level (and remove
unnecessary line breaks).

This is only a preparation/cleanup for the next patch where we fix up
return values from mqueue_get_inode.

Signed-off-by: Jiri Slaby 
Cc: Manfred Spraul 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

ipc/sem.c: fix race with concurrent semtimedop() timeouts and IPC_RMID

2011-07-26T03:57:07+00:00

If a semaphore array is removed and in parallel a sleeping task is woken
up (signal or timeout, does not matter), then the woken up task does not
wait until wake_up_sem_queue_do() is completed.  This will cause crashes,
because wake_up_sem_queue_do() will read from a stale pointer.

The fix is simple: Regardless of anything, always call get_queue_result().
This function waits until wake_up_sem_queue_do() has finished it's task.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=27142

Reported-by: Yuriy Yevtukhov 
Reported-by: Harald Laabs 
Signed-off-by: Manfred Spraul 
Acked-by: Eric Dumazet 
Cc: 		[2.6.35+]
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6

2011-07-23T02:02:39+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits)
  vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp
  isofs: Remove global fs lock
  jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory
  fix IN_DELETE_SELF on overwriting rename() on ramfs et.al.
  mm/truncate.c: fix build for CONFIG_BLOCK not enabled
  fs:update the NOTE of the file_operations structure
  Remove dead code in dget_parent()
  AFS: Fix silly characters in a comment
  switch d_add_ci() to d_splice_alias() in "found negative" case as well
  simplify gfs2_lookup()
  jfs_lookup(): don't bother with . or ..
  get rid of useless dget_parent() in btrfs rename() and link()
  get rid of useless dget_parent() in fs/btrfs/ioctl.c
  fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
  drivers: fix up various ->llseek() implementations
  fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek
  Ext4: handle SEEK_HOLE/SEEK_DATA generically
  Btrfs: implement our own ->llseek
  fs: add SEEK_HOLE and SEEK_DATA flags
  reiserfs: make reiserfs default to barrier=flush
  ...

Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new
shrinker callout for the inode cache, that clashed with the xfs code to
start the periodic workers later.