<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/ipc, branch v3.9-rc3</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>ipc: don't allocate a copy larger than max</title>
<updated>2013-03-08T23:05:33+00:00</updated>
<author>
<name>Peter Hurley</name>
<email>peter@hurleysoftware.com</email>
</author>
<published>2013-03-08T20:43:27+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=88b9e456b1649722673ffa147914299799dc9041'/>
<id>88b9e456b1649722673ffa147914299799dc9041</id>
<content type='text'>
When MSG_COPY is set, a duplicate message must be allocated for the copy
before locking the queue.  However, the copy could not be larger than was
sent which is limited to msg_ctlmax.

Signed-off-by: Peter Hurley &lt;peter@hurleysoftware.com&gt;
Acked-by: Stanislav Kinsbursky &lt;skinsbursky@parallels.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When MSG_COPY is set, a duplicate message must be allocated for the copy
before locking the queue.  However, the copy could not be larger than was
sent which is limited to msg_ctlmax.

Signed-off-by: Peter Hurley &lt;peter@hurleysoftware.com&gt;
Acked-by: Stanislav Kinsbursky &lt;skinsbursky@parallels.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipc: fix potential oops when src msg &gt; 4k w/ MSG_COPY</title>
<updated>2013-03-08T23:05:33+00:00</updated>
<author>
<name>Peter Hurley</name>
<email>peter@hurleysoftware.com</email>
</author>
<published>2013-03-08T20:43:26+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=e1082f45f1e2bbf6e25f6b614fc6616ebf709d19'/>
<id>e1082f45f1e2bbf6e25f6b614fc6616ebf709d19</id>
<content type='text'>
If the src msg is &gt; 4k, then dest-&gt;next points to the
next allocated segment; resetting it just prior to dereferencing
is bad.

Signed-off-by: Peter Hurley &lt;peter@hurleysoftware.com&gt;
Acked-by: Stanislav Kinsbursky &lt;skinsbursky@parallels.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
If the src msg is &gt; 4k, then dest-&gt;next points to the
next allocated segment; resetting it just prior to dereferencing
is bad.

Signed-off-by: Peter Hurley &lt;peter@hurleysoftware.com&gt;
Acked-by: Stanislav Kinsbursky &lt;skinsbursky@parallels.com&gt;
Cc: &lt;stable@vger.kernel.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>ipc: convert to idr_alloc()</title>
<updated>2013-02-28T03:10:19+00:00</updated>
<author>
<name>Tejun Heo</name>
<email>tj@kernel.org</email>
</author>
<published>2013-02-28T01:04:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=54924ea33f3ba702243ba4ab068d7d2852db8098'/>
<id>54924ea33f3ba702243ba4ab068d7d2852db8098</id>
<content type='text'>
Convert to the much saner new idr interface.

The new interface doesn't directly translate to the way idr_pre_get()
was used around ipc_addid() as preloading disables preemption.  From
my cursory reading, it seems like we should be able to do all
allocation from ipc_addid(), so I moved it there.  Can you please
check whether this would be okay?  If this is wrong and ipc_addid()
should be allowed to be called from non-sleepable context, I'd suggest
allocating id itself in the outer functions and later install the
pointer using idr_replace().

Signed-off-by: Tejun Heo &lt;tj@kernel.org&gt;
Reported-by: Sedat Dilek &lt;sedat.dilek@gmail.com&gt;
Tested-by: Sedat Dilek &lt;sedat.dilek@gmail.com&gt;
Cc: Stanislav Kinsbursky &lt;skinsbursky@parallels.com&gt;
Cc: "Eric W. Biederman" &lt;ebiederm@xmission.com&gt;
Cc: James Morris &lt;jmorris@namei.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Convert to the much saner new idr interface.

The new interface doesn't directly translate to the way idr_pre_get()
was used around ipc_addid() as preloading disables preemption.  From
my cursory reading, it seems like we should be able to do all
allocation from ipc_addid(), so I moved it there.  Can you please
check whether this would be okay?  If this is wrong and ipc_addid()
should be allowed to be called from non-sleepable context, I'd suggest
allocating id itself in the outer functions and later install the
pointer using idr_replace().

Signed-off-by: Tejun Heo &lt;tj@kernel.org&gt;
Reported-by: Sedat Dilek &lt;sedat.dilek@gmail.com&gt;
Tested-by: Sedat Dilek &lt;sedat.dilek@gmail.com&gt;
Cc: Stanislav Kinsbursky &lt;skinsbursky@parallels.com&gt;
Cc: "Eric W. Biederman" &lt;ebiederm@xmission.com&gt;
Cc: James Morris &lt;jmorris@namei.org&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs</title>
<updated>2013-02-27T04:16:07+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-02-27T04:16:07+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=d895cb1af15c04c522a25c79cc429076987c089b'/>
<id>d895cb1af15c04c522a25c79cc429076987c089b</id>
<content type='text'>
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing -&gt;d_name/-&gt;d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has -&gt;d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both -&gt;f_pos and -&gt;f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing -&gt;d_name/-&gt;d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has -&gt;d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both -&gt;f_pos and -&gt;f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace</title>
<updated>2013-02-26T00:00:49+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@linux-foundation.org</email>
</author>
<published>2013-02-26T00:00:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=94f2f14234178f118545a0be60a6371ddeb229b7'/>
<id>94f2f14234178f118545a0be60a6371ddeb229b7</id>
<content type='text'>
Pull user namespace and namespace infrastructure changes from Eric W Biederman:
 "This set of changes starts with a few small enhnacements to the user
  namespace.  reboot support, allowing more arbitrary mappings, and
  support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the
  user namespace root.

  I do my best to document that if you care about limiting your
  unprivileged users that when you have the user namespace support
  enabled you will need to enable memory control groups.

  There is a minor bug fix to prevent overflowing the stack if someone
  creates way too many user namespaces.

  The bulk of the changes are a continuation of the kuid/kgid push down
  work through the filesystems.  These changes make using uids and gids
  typesafe which ensures that these filesystems are safe to use when
  multiple user namespaces are in use.  The filesystems converted for
  3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs.  The
  changes for these filesystems were a little more involved so I split
  the changes into smaller hopefully obviously correct changes.

  XFS is the only filesystem that remains.  I was hoping I could get
  that in this release so that user namespace support would be enabled
  with an allyesconfig or an allmodconfig but it looks like the xfs
  changes need another couple of days before it they are ready."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits)
  cifs: Enable building with user namespaces enabled.
  cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t
  cifs: Convert struct cifs_sb_info to use kuids and kgids
  cifs: Modify struct smb_vol to use kuids and kgids
  cifs: Convert struct cifsFileInfo to use a kuid
  cifs: Convert struct cifs_fattr to use kuid and kgids
  cifs: Convert struct tcon_link to use a kuid.
  cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
  cifs: Convert from a kuid before printing current_fsuid
  cifs: Use kuids and kgids SID to uid/gid mapping
  cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc
  cifs: Use BUILD_BUG_ON to validate uids and gids are the same size
  cifs: Override unmappable incoming uids and gids
  nfsd: Enable building with user namespaces enabled.
  nfsd: Properly compare and initialize kuids and kgids
  nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids
  nfsd: Modify nfsd4_cb_sec to use kuids and kgids
  nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion
  nfsd: Convert nfsxdr to use kuids and kgids
  nfsd: Convert nfs3xdr to use kuids and kgids
  ...
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Pull user namespace and namespace infrastructure changes from Eric W Biederman:
 "This set of changes starts with a few small enhnacements to the user
  namespace.  reboot support, allowing more arbitrary mappings, and
  support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the
  user namespace root.

  I do my best to document that if you care about limiting your
  unprivileged users that when you have the user namespace support
  enabled you will need to enable memory control groups.

  There is a minor bug fix to prevent overflowing the stack if someone
  creates way too many user namespaces.

  The bulk of the changes are a continuation of the kuid/kgid push down
  work through the filesystems.  These changes make using uids and gids
  typesafe which ensures that these filesystems are safe to use when
  multiple user namespaces are in use.  The filesystems converted for
  3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs.  The
  changes for these filesystems were a little more involved so I split
  the changes into smaller hopefully obviously correct changes.

  XFS is the only filesystem that remains.  I was hoping I could get
  that in this release so that user namespace support would be enabled
  with an allyesconfig or an allmodconfig but it looks like the xfs
  changes need another couple of days before it they are ready."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits)
  cifs: Enable building with user namespaces enabled.
  cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t
  cifs: Convert struct cifs_sb_info to use kuids and kgids
  cifs: Modify struct smb_vol to use kuids and kgids
  cifs: Convert struct cifsFileInfo to use a kuid
  cifs: Convert struct cifs_fattr to use kuid and kgids
  cifs: Convert struct tcon_link to use a kuid.
  cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
  cifs: Convert from a kuid before printing current_fsuid
  cifs: Use kuids and kgids SID to uid/gid mapping
  cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc
  cifs: Use BUILD_BUG_ON to validate uids and gids are the same size
  cifs: Override unmappable incoming uids and gids
  nfsd: Enable building with user namespaces enabled.
  nfsd: Properly compare and initialize kuids and kgids
  nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids
  nfsd: Modify nfsd4_cb_sec to use kuids and kgids
  nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion
  nfsd: Convert nfsxdr to use kuids and kgids
  nfsd: Convert nfs3xdr to use kuids and kgids
  ...
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: make do_mmap_pgoff return populate as a size in bytes, not as a bool</title>
<updated>2013-02-24T01:50:11+00:00</updated>
<author>
<name>Michel Lespinasse</name>
<email>walken@google.com</email>
</author>
<published>2013-02-23T00:32:47+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=41badc15cbad0350de34408c1b0c690f9df76d4b'/>
<id>41badc15cbad0350de34408c1b0c690f9df76d4b</id>
<content type='text'>
do_mmap_pgoff() rounds up the desired size to the next PAGE_SIZE
multiple, however there was no equivalent code in mm_populate(), which
caused issues.

This could be fixed by introduced the same rounding in mm_populate(),
however I think it's preferable to make do_mmap_pgoff() return populate
as a size rather than as a boolean, so we don't have to duplicate the
size rounding logic in mm_populate().

Signed-off-by: Michel Lespinasse &lt;walken@google.com&gt;
Acked-by: Rik van Riel &lt;riel@redhat.com&gt;
Tested-by: Andy Lutomirski &lt;luto@amacapital.net&gt;
Cc: Greg Ungerer &lt;gregungerer@westnet.com.au&gt;
Cc: David Howells &lt;dhowells@redhat.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
do_mmap_pgoff() rounds up the desired size to the next PAGE_SIZE
multiple, however there was no equivalent code in mm_populate(), which
caused issues.

This could be fixed by introduced the same rounding in mm_populate(),
however I think it's preferable to make do_mmap_pgoff() return populate
as a size rather than as a boolean, so we don't have to duplicate the
size rounding logic in mm_populate().

Signed-off-by: Michel Lespinasse &lt;walken@google.com&gt;
Acked-by: Rik van Riel &lt;riel@redhat.com&gt;
Tested-by: Andy Lutomirski &lt;luto@amacapital.net&gt;
Cc: Greg Ungerer &lt;gregungerer@westnet.com.au&gt;
Cc: David Howells &lt;dhowells@redhat.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: introduce mm_populate() for populating new vmas</title>
<updated>2013-02-24T01:50:10+00:00</updated>
<author>
<name>Michel Lespinasse</name>
<email>walken@google.com</email>
</author>
<published>2013-02-23T00:32:37+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=bebeb3d68b24bb4132d452c5707fe321208bcbcd'/>
<id>bebeb3d68b24bb4132d452c5707fe321208bcbcd</id>
<content type='text'>
When creating new mappings using the MAP_POPULATE / MAP_LOCKED flags (or
with MCL_FUTURE in effect), we want to populate the pages within the
newly created vmas.  This may take a while as we may have to read pages
from disk, so ideally we want to do this outside of the write-locked
mmap_sem region.

This change introduces mm_populate(), which is used to defer populating
such mappings until after the mmap_sem write lock has been released.
This is implemented as a generalization of the former do_mlock_pages(),
which accomplished the same task but was using during mlock() /
mlockall().

Signed-off-by: Michel Lespinasse &lt;walken@google.com&gt;
Reported-by: Andy Lutomirski &lt;luto@amacapital.net&gt;
Acked-by: Rik van Riel &lt;riel@redhat.com&gt;
Tested-by: Andy Lutomirski &lt;luto@amacapital.net&gt;
Cc: Greg Ungerer &lt;gregungerer@westnet.com.au&gt;
Cc: David Howells &lt;dhowells@redhat.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
When creating new mappings using the MAP_POPULATE / MAP_LOCKED flags (or
with MCL_FUTURE in effect), we want to populate the pages within the
newly created vmas.  This may take a while as we may have to read pages
from disk, so ideally we want to do this outside of the write-locked
mmap_sem region.

This change introduces mm_populate(), which is used to defer populating
such mappings until after the mmap_sem write lock has been released.
This is implemented as a generalization of the former do_mlock_pages(),
which accomplished the same task but was using during mlock() /
mlockall().

Signed-off-by: Michel Lespinasse &lt;walken@google.com&gt;
Reported-by: Andy Lutomirski &lt;luto@amacapital.net&gt;
Acked-by: Rik van Riel &lt;riel@redhat.com&gt;
Tested-by: Andy Lutomirski &lt;luto@amacapital.net&gt;
Cc: Greg Ungerer &lt;gregungerer@westnet.com.au&gt;
Cc: David Howells &lt;dhowells@redhat.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>fs: Preserve error code in get_empty_filp(), part 2</title>
<updated>2013-02-23T04:31:32+00:00</updated>
<author>
<name>Anatol Pomozov</name>
<email>anatol.pomozov@gmail.com</email>
</author>
<published>2012-09-13T03:11:55+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=39b652527457452f09b35044fb4f8b3b0eabafdf'/>
<id>39b652527457452f09b35044fb4f8b3b0eabafdf</id>
<content type='text'>
Allocating a file structure in function get_empty_filp() might fail because
of several reasons:
 - not enough memory for file structures
 - operation is not allowed
 - user is over its limit

Currently the function returns NULL in all cases and we loose the exact
reason of the error. All callers of get_empty_filp() assume that the function
can fail with ENFILE only.

Return error through pointer. Change all callers to preserve this error code.

[AV: cleaned up a bit, carved the get_empty_filp() part out into a separate commit
(things remaining here deal with alloc_file()), removed pipe(2) behaviour change]

Signed-off-by: Anatol Pomozov &lt;anatol.pomozov@gmail.com&gt;
Reviewed-by: "Theodore Ts'o" &lt;tytso@mit.edu&gt;
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Allocating a file structure in function get_empty_filp() might fail because
of several reasons:
 - not enough memory for file structures
 - operation is not allowed
 - user is over its limit

Currently the function returns NULL in all cases and we loose the exact
reason of the error. All callers of get_empty_filp() assume that the function
can fail with ENFILE only.

Return error through pointer. Change all callers to preserve this error code.

[AV: cleaned up a bit, carved the get_empty_filp() part out into a separate commit
(things remaining here deal with alloc_file()), removed pipe(2) behaviour change]

Signed-off-by: Anatol Pomozov &lt;anatol.pomozov@gmail.com&gt;
Reviewed-by: "Theodore Ts'o" &lt;tytso@mit.edu&gt;
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>new helper: file_inode(file)</title>
<updated>2013-02-23T04:31:31+00:00</updated>
<author>
<name>Al Viro</name>
<email>viro@zeniv.linux.org.uk</email>
</author>
<published>2013-01-23T22:07:38+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=496ad9aa8ef448058e36ca7a787c61f2e63f0f54'/>
<id>496ad9aa8ef448058e36ca7a787c61f2e63f0f54</id>
<content type='text'>
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Signed-off-by: Al Viro &lt;viro@zeniv.linux.org.uk&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>userns: Allow the unprivileged users to mount mqueue fs</title>
<updated>2013-01-28T03:25:50+00:00</updated>
<author>
<name>Gao feng</name>
<email>gaofeng@cn.fujitsu.com</email>
</author>
<published>2013-01-28T03:09:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=bc1b69ed22a704fb1cc83d75b2eb46508a06c820'/>
<id>bc1b69ed22a704fb1cc83d75b2eb46508a06c820</id>
<content type='text'>
This patch allow the unprivileged user to mount mqueuefs in
user ns.

If two userns share the same ipcns,the files in mqueue fs
should be seen in both these two userns.

If the userns has its own ipcns,it has its own mqueue fs too.
ipcns has already done this job well.

Signed-off-by: Gao feng &lt;gaofeng@cn.fujitsu.com&gt;
Signed-off-by: Eric W. Biederman &lt;ebiederm@xmission.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
This patch allow the unprivileged user to mount mqueuefs in
user ns.

If two userns share the same ipcns,the files in mqueue fs
should be seen in both these two userns.

If the userns has its own ipcns,it has its own mqueue fs too.
ipcns has already done this job well.

Signed-off-by: Gao feng &lt;gaofeng@cn.fujitsu.com&gt;
Signed-off-by: Eric W. Biederman &lt;ebiederm@xmission.com&gt;
</pre>
</div>
</content>
</entry>
</feed>
