linux-toradex.git/kernel/Makefile, branch v5.13-rc3 Linux kernel for Apalis and Colibri modules kbuild: update config_data.gz only when the content of .config is changed 2021-05-01T15:43:35+00:00 Masahiro Yamada masahiroy@kernel.org 2021-04-25T06:24:07+00:00 46b41d5dd8019b264717978c39c43313a524d033 If the timestamp of the .config file is updated, config_data.gz is regenerated, then vmlinux is re-linked. This occurs even if the content of the .config has not changed at all. This issue was mitigated by commit 67424f61f813 ("kconfig: do not write .config if the content is the same"); Kconfig does not update the .config when it ends up with the identical configuration. The issue is remaining when the .config is created by *_defconfig with some config fragment(s) applied on top. This is typical for powerpc and mips, where several *_defconfig targets are constructed by using merge_config.sh. One workaround is to have the copy of the .config. The filechk rule updates the copy, kernel/config_data, by checking the content instead of the timestamp. With this commit, the second run with the same configuration avoids the needless rebuilds. $ make ARCH=mips defconfig all [ snip ] $ make ARCH=mips defconfig all *** Default configuration is based on target '32r2el_defconfig' Using ./arch/mips/configs/generic_defconfig as base Merging arch/mips/configs/generic/32r2.config Merging arch/mips/configs/generic/el.config Merging ./arch/mips/configs/generic/board-boston.config Merging ./arch/mips/configs/generic/board-ni169445.config Merging ./arch/mips/configs/generic/board-ocelot.config Merging ./arch/mips/configs/generic/board-ranchu.config Merging ./arch/mips/configs/generic/board-sead-3.config Merging ./arch/mips/configs/generic/board-xilfpga.config # # configuration written to .config # SYNC include/config/auto.conf CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh CHK include/generated/compile.h CHK include/generated/autoksyms.h Reported-by: Elliot Berman <eberman@codeaurora.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 
If the timestamp of the .config file is updated, config_data.gz is
regenerated, then vmlinux is re-linked. This occurs even if the content
of the .config has not changed at all.

This issue was mitigated by commit 67424f61f813 ("kconfig: do not write
.config if the content is the same"); Kconfig does not update the
.config when it ends up with the identical configuration.

The issue is remaining when the .config is created by *_defconfig with
some config fragment(s) applied on top.

This is typical for powerpc and mips, where several *_defconfig targets
are constructed by using merge_config.sh.

One workaround is to have the copy of the .config. The filechk rule
updates the copy, kernel/config_data, by checking the content instead
of the timestamp.

With this commit, the second run with the same configuration avoids
the needless rebuilds.

  $ make ARCH=mips defconfig all
   [ snip ]
  $ make ARCH=mips defconfig all
  *** Default configuration is based on target '32r2el_defconfig'
  Using ./arch/mips/configs/generic_defconfig as base
  Merging arch/mips/configs/generic/32r2.config
  Merging arch/mips/configs/generic/el.config
  Merging ./arch/mips/configs/generic/board-boston.config
  Merging ./arch/mips/configs/generic/board-ni169445.config
  Merging ./arch/mips/configs/generic/board-ocelot.config
  Merging ./arch/mips/configs/generic/board-ranchu.config
  Merging ./arch/mips/configs/generic/board-sead-3.config
  Merging ./arch/mips/configs/generic/board-xilfpga.config
  #
  # configuration written to .config
  #
    SYNC    include/config/auto.conf
    CALL    scripts/checksyscalls.sh
    CALL    scripts/atomic/check-atomics.sh
    CHK     include/generated/compile.h
    CHK     include/generated/autoksyms.h

Reported-by: Elliot Berman <eberman@codeaurora.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
add support for Clang CFI 2021-04-08T23:04:20+00:00 Sami Tolvanen samitolvanen@google.com 2021-04-08T18:28:26+00:00 cf68fffb66d60d96209446bfc4a15291dc5a5d41 This change adds support for Clang’s forward-edge Control Flow Integrity (CFI) checking. With CONFIG_CFI_CLANG, the compiler injects a runtime check before each indirect function call to ensure the target is a valid function with the correct static type. This restricts possible call targets and makes it more difficult for an attacker to exploit bugs that allow the modification of stored function pointers. For more details, see: https://clang.llvm.org/docs/ControlFlowIntegrity.html Clang requires CONFIG_LTO_CLANG to be enabled with CFI to gain visibility to possible call targets. Kernel modules are supported with Clang’s cross-DSO CFI mode, which allows checking between independently compiled components. With CFI enabled, the compiler injects a __cfi_check() function into the kernel and each module for validating local call targets. For cross-module calls that cannot be validated locally, the compiler calls the global __cfi_slowpath_diag() function, which determines the target module and calls the correct __cfi_check() function. This patch includes a slowpath implementation that uses __module_address() to resolve call targets, and with CONFIG_CFI_CLANG_SHADOW enabled, a shadow map that speeds up module look-ups by ~3x. Clang implements indirect call checking using jump tables and offers two methods of generating them. With canonical jump tables, the compiler renames each address-taken function to <function>.cfi and points the original symbol to a jump table entry, which passes __cfi_check() validation. This isn’t compatible with stand-alone assembly code, which the compiler doesn’t instrument, and would result in indirect calls to assembly code to fail. Therefore, we default to using non-canonical jump tables instead, where the compiler generates a local jump table entry <function>.cfi_jt for each address-taken function, and replaces all references to the function with the address of the jump table entry. Note that because non-canonical jump table addresses are local to each component, they break cross-module function address equality. Specifically, the address of a global function will be different in each module, as it's replaced with the address of a local jump table entry. If this address is passed to a different module, it won’t match the address of the same function taken there. This may break code that relies on comparing addresses passed from other components. CFI checking can be disabled in a function with the __nocfi attribute. Additionally, CFI can be disabled for an entire compilation unit by filtering out CC_FLAGS_CFI. By default, CFI failures result in a kernel panic to stop a potential exploit. CONFIG_CFI_PERMISSIVE enables a permissive mode, where the kernel prints out a rate-limited warning instead, and allows execution to continue. This option is helpful for locating type mismatches, but should only be enabled during development. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210408182843.1754385-2-samitolvanen@google.com 
This change adds support for Clang’s forward-edge Control Flow
Integrity (CFI) checking. With CONFIG_CFI_CLANG, the compiler
injects a runtime check before each indirect function call to ensure
the target is a valid function with the correct static type. This
restricts possible call targets and makes it more difficult for
an attacker to exploit bugs that allow the modification of stored
function pointers. For more details, see:

  https://clang.llvm.org/docs/ControlFlowIntegrity.html

Clang requires CONFIG_LTO_CLANG to be enabled with CFI to gain
visibility to possible call targets. Kernel modules are supported
with Clang’s cross-DSO CFI mode, which allows checking between
independently compiled components.

With CFI enabled, the compiler injects a __cfi_check() function into
the kernel and each module for validating local call targets. For
cross-module calls that cannot be validated locally, the compiler
calls the global __cfi_slowpath_diag() function, which determines
the target module and calls the correct __cfi_check() function. This
patch includes a slowpath implementation that uses __module_address()
to resolve call targets, and with CONFIG_CFI_CLANG_SHADOW enabled, a
shadow map that speeds up module look-ups by ~3x.

Clang implements indirect call checking using jump tables and
offers two methods of generating them. With canonical jump tables,
the compiler renames each address-taken function to <function>.cfi
and points the original symbol to a jump table entry, which passes
__cfi_check() validation. This isn’t compatible with stand-alone
assembly code, which the compiler doesn’t instrument, and would
result in indirect calls to assembly code to fail. Therefore, we
default to using non-canonical jump tables instead, where the compiler
generates a local jump table entry <function>.cfi_jt for each
address-taken function, and replaces all references to the function
with the address of the jump table entry.

Note that because non-canonical jump table addresses are local
to each component, they break cross-module function address
equality. Specifically, the address of a global function will be
different in each module, as it's replaced with the address of a local
jump table entry. If this address is passed to a different module,
it won’t match the address of the same function taken there. This
may break code that relies on comparing addresses passed from other
components.

CFI checking can be disabled in a function with the __nocfi attribute.
Additionally, CFI can be disabled for an entire compilation unit by
filtering out CC_FLAGS_CFI.

By default, CFI failures result in a kernel panic to stop a potential
exploit. CONFIG_CFI_PERMISSIVE enables a permissive mode, where the
kernel prints out a rate-limited warning instead, and allows execution
to continue. This option is helpful for locating type mismatches, but
should only be enabled during development.

Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210408182843.1754385-2-samitolvanen@google.com
kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE 2021-02-16T08:59:41+00:00 Chris Wilson chris@chris-wilson.co.uk 2021-02-05T22:00:12+00:00 bfe3911a91047557eb0e620f95a370aee6a248c7 Userspace has discovered the functionality offered by SYS_kcmp and has started to depend upon it. In particular, Mesa uses SYS_kcmp for os_same_file_description() in order to identify when two fd (e.g. device or dmabuf) point to the same struct file. Since they depend on it for core functionality, lift SYS_kcmp out of the non-default CONFIG_CHECKPOINT_RESTORE into the selectable syscall category. Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to deduplicate the per-service file descriptor store. Note that some distributions such as Ubuntu are already enabling CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp. References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk 
Userspace has discovered the functionality offered by SYS_kcmp and has
started to depend upon it. In particular, Mesa uses SYS_kcmp for
os_same_file_description() in order to identify when two fd (e.g. device
or dmabuf) point to the same struct file. Since they depend on it for
core functionality, lift SYS_kcmp out of the non-default
CONFIG_CHECKPOINT_RESTORE into the selectable syscall category.

Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to
deduplicate the per-service file descriptor store.

Note that some distributions such as Ubuntu are already enabling
CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk
kcov: don't instrument with UBSAN 2020-12-16T06:46:19+00:00 Dmitry Vyukov dvyukov@google.com 2020-12-16T04:46:46+00:00 c1cb05e77f8e3ec89eec7bed64af07cd20ed24de Both KCOV and UBSAN use compiler instrumentation. If UBSAN detects a bug in KCOV, it may cause infinite recursion via printk and other common functions. We already don't instrument KCOV with KASAN/KCSAN for this reason, don't instrument it with UBSAN as well. As a side effect this also resolves the following gcc warning: conflicting types for built-in function '__sanitizer_cov_trace_switch'; expected 'void(long unsigned int, void *)' [-Wbuiltin-declaration-mismatch] It's only reported when kcov.c is compiled with any of the sanitizers enabled. Size of the arguments is correct, it's just that gcc uses 'long' on 64-bit arches and 'long long' on 32-bit arches, while kernel type is always 'long long'. Link: https://lkml.kernel.org/r/20201209100152.2492072-1-dvyukov@google.com Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Suggested-by: Marco Elver <elver@google.com> Acked-by: Marco Elver <elver@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Both KCOV and UBSAN use compiler instrumentation.  If UBSAN detects a bug
in KCOV, it may cause infinite recursion via printk and other common
functions.  We already don't instrument KCOV with KASAN/KCSAN for this
reason, don't instrument it with UBSAN as well.

As a side effect this also resolves the following gcc warning:

conflicting types for built-in function '__sanitizer_cov_trace_switch';
expected 'void(long unsigned int, void *)'
[-Wbuiltin-declaration-mismatch]

It's only reported when kcov.c is compiled with any of the sanitizers
enabled.  Size of the arguments is correct, it's just that gcc uses 'long'
on 64-bit arches and 'long long' on 32-bit arches, while kernel type is
always 'long long'.

Link: https://lkml.kernel.org/r/20201209100152.2492072-1-dvyukov@google.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm 2020-12-16T00:39:06+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-12-16T00:39:06+00:00 aab7ce2b099bd9df82573cd3170acf6518fdebeb Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20201113, fix and clean up some resources manipulation code, extend the enumeration and gpio-line-names property documentation, clean up the handling of _DEP during device enumeration, add a new backlight DMI quirk, clean up transaction handling in the EC driver and make some assorted janitorial changes. Specifics: - Update ACPICA code in the kernel to upstream revision 20201113 with changes as follows: * Add 5 new UUIDs to the known UUID table (Bob Moore) * Remove extreaneous "the" in comments (Colin Ian King) * Add function trace macros to improve debugging (Erik Kaneda) * Fix interpreter memory leak (Erik Kaneda) * Handle "orphan" _REG for GPIO OpRegions (Hans de Goede) - Introduce resource_union() and resource_intersection() helpers and clean up some resource-manipulation code with the help of them (Andy Shevchenko) - Revert problematic commit related to the handling of resources in the ACPI core (Daniel Scally) - Extend the ACPI device enumeration documentation and the gpio-line-names _DSD property documentation, clean up the latter (Flavio Suligoi) - Clean up _DEP handling during device enumeration, modify the list of _DEP exceptions and the handling of it and fix up terminology related to _DEP (Hans de Goede, Rafael Wysocki) - Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian Andrzej Siewior) - Clean up the advance_transaction() routine and related code in the ACPI EC driver (Rafael Wysocki) - Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper St Pierre) - Make assorted janitorial changes in several ACPI-related pieces of code (Hanjun Guo, Jason Yan, Punit Agrawal)" * tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits) ACPI: scan: Fix up _DEP-related terminology with supplier/consumer ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[] ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807 Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks" ACPI: scan: Add PNP0D80 to the _DEP exceptions list ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object() ACPI: scan: Add acpi_info_matches_hids() helper ACPICA: Update version to 20201113 ACPICA: Interpreter: fix memory leak by using existing buffer ACPICA: Add function trace macros to improve debugging ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions ACPICA: Remove extreaneous "the" in comments ACPICA: Add 5 new UUIDs to the known UUID table resource: provide meaningful MODULE_LICENSE() in test suite ASoC: Intel: catpt: Replace open coded variant of resource_intersection() ACPI: processor: Drop duplicate setting of shared_cpu_map ACPI: EC: Clean up status flags checks in advance_transaction() ACPI: EC: Untangle error handling in advance_transaction() ACPI: EC: Simplify error handling in advance_transaction() ACPI: EC: Rename acpi_ec_is_gpe_raised() ... 
Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to upstream revision
  20201113, fix and clean up some resources manipulation code, extend
  the enumeration and gpio-line-names property documentation, clean up
  the handling of _DEP during device enumeration, add a new backlight
  DMI quirk, clean up transaction handling in the EC driver and make
  some assorted janitorial changes.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20201113 with
     changes as follows:
       * Add 5 new UUIDs to the known UUID table (Bob Moore)
       * Remove extreaneous "the" in comments (Colin Ian King)
       * Add function trace macros to improve debugging (Erik Kaneda)
       * Fix interpreter memory leak (Erik Kaneda)
       * Handle "orphan" _REG for GPIO OpRegions (Hans de Goede)

   - Introduce resource_union() and resource_intersection() helpers and
     clean up some resource-manipulation code with the help of them
     (Andy Shevchenko)

   - Revert problematic commit related to the handling of resources in
     the ACPI core (Daniel Scally)

   - Extend the ACPI device enumeration documentation and the
     gpio-line-names _DSD property documentation, clean up the latter
     (Flavio Suligoi)

   - Clean up _DEP handling during device enumeration, modify the list
     of _DEP exceptions and the handling of it and fix up terminology
     related to _DEP (Hans de Goede, Rafael Wysocki)

   - Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
     Andrzej Siewior)

   - Clean up the advance_transaction() routine and related code in the
     ACPI EC driver (Rafael Wysocki)

   - Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper St
     Pierre)

   - Make assorted janitorial changes in several ACPI-related pieces of
     code (Hanjun Guo, Jason Yan, Punit Agrawal)"

* tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
  ACPI: scan: Fix up _DEP-related terminology with supplier/consumer
  ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[]
  ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807
  Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
  ACPI: scan: Add PNP0D80 to the _DEP exceptions list
  ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object()
  ACPI: scan: Add acpi_info_matches_hids() helper
  ACPICA: Update version to 20201113
  ACPICA: Interpreter: fix memory leak by using existing buffer
  ACPICA: Add function trace macros to improve debugging
  ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions
  ACPICA: Remove extreaneous "the" in comments
  ACPICA: Add 5 new UUIDs to the known UUID table
  resource: provide meaningful MODULE_LICENSE() in test suite
  ASoC: Intel: catpt: Replace open coded variant of resource_intersection()
  ACPI: processor: Drop duplicate setting of shared_cpu_map
  ACPI: EC: Clean up status flags checks in advance_transaction()
  ACPI: EC: Untangle error handling in advance_transaction()
  ACPI: EC: Simplify error handling in advance_transaction()
  ACPI: EC: Rename acpi_ec_is_gpe_raised()
  ...
elfcore: fix building with clang 2020-12-11T22:02:14+00:00 Arnd Bergmann arnd@arndb.de 2020-12-11T21:36:46+00:00 6e7b64b9dd6d96537d816ea07ec26b7dedd397b9 kernel/elfcore.c only contains weak symbols, which triggers a bug with clang in combination with recordmcount: Cannot find symbol for section 2: .text. kernel/elfcore.o: failed Move the empty stubs into linux/elfcore.h as inline functions. As only two architectures use these, just use the architecture specific Kconfig symbols to key off the declaration. Link: https://lkml.kernel.org/r/20201204165742.3815221-2-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Barret Rhoden <brho@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
kernel/elfcore.c only contains weak symbols, which triggers a bug with
clang in combination with recordmcount:

  Cannot find symbol for section 2: .text.
  kernel/elfcore.o: failed

Move the empty stubs into linux/elfcore.h as inline functions.  As only
two architectures use these, just use the architecture specific Kconfig
symbols to key off the declaration.

Link: https://lkml.kernel.org/r/20201204165742.3815221-2-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Barret Rhoden <brho@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
resource: Add test cases for new resource API 2020-11-17T17:06:28+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2020-11-03T20:45:08+00:00 5df38ca6afeceaf3ea911ad2f7e2101364dee48d Add test cases for newly added resource APIs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 
Add test cases for newly added resource APIs.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild 2020-10-22T20:13:57+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-22T20:13:57+00:00 746b25b1aa0f5736d585728ded70a8141da91edb Pull Kbuild updates from Masahiro Yamada: - Support 'make compile_commands.json' to generate the compilation database more easily, avoiding stale entries - Support 'make clang-analyzer' and 'make clang-tidy' for static checks using clang-tidy - Preprocess scripts/modules.lds.S to allow CONFIG options in the module linker script - Drop cc-option tests from compiler flags supported by our minimal GCC/Clang versions - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y - Use sha1 build id for both BFD linker and LLD - Improve deb-pkg for reproducible builds and rootless builds - Remove stale, useless scripts/namespace.pl - Turn -Wreturn-type warning into error - Fix build error of deb-pkg when CONFIG_MODULES=n - Replace 'hostname' command with more portable 'uname -n' - Various Makefile cleanups * tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: Use uname for LINUX_COMPILE_HOST detection kbuild: Only add -fno-var-tracking-assignments for old GCC versions kbuild: remove leftover comment for filechk utility treewide: remove DISABLE_LTO kbuild: deb-pkg: clean up package name variables kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n kbuild: enforce -Werror=return-type scripts: remove namespace.pl builddeb: Add support for all required debian/rules targets builddeb: Enable rootless builds builddeb: Pass -n to gzip for reproducible packages kbuild: split the build log of kallsyms kbuild: explicitly specify the build id style scripts/setlocalversion: make git describe output more reliable kbuild: remove cc-option test of -Werror=date-time kbuild: remove cc-option test of -fno-stack-check kbuild: remove cc-option test of -fno-strict-overflow kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan kbuild: do not create built-in objects for external module builds ... 
Pull Kbuild updates from Masahiro Yamada:

 - Support 'make compile_commands.json' to generate the compilation
   database more easily, avoiding stale entries

 - Support 'make clang-analyzer' and 'make clang-tidy' for static checks
   using clang-tidy

 - Preprocess scripts/modules.lds.S to allow CONFIG options in the
   module linker script

 - Drop cc-option tests from compiler flags supported by our minimal
   GCC/Clang versions

 - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y

 - Use sha1 build id for both BFD linker and LLD

 - Improve deb-pkg for reproducible builds and rootless builds

 - Remove stale, useless scripts/namespace.pl

 - Turn -Wreturn-type warning into error

 - Fix build error of deb-pkg when CONFIG_MODULES=n

 - Replace 'hostname' command with more portable 'uname -n'

 - Various Makefile cleanups

* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
  kbuild: Use uname for LINUX_COMPILE_HOST detection
  kbuild: Only add -fno-var-tracking-assignments for old GCC versions
  kbuild: remove leftover comment for filechk utility
  treewide: remove DISABLE_LTO
  kbuild: deb-pkg: clean up package name variables
  kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
  kbuild: enforce -Werror=return-type
  scripts: remove namespace.pl
  builddeb: Add support for all required debian/rules targets
  builddeb: Enable rootless builds
  builddeb: Pass -n to gzip for reproducible packages
  kbuild: split the build log of kallsyms
  kbuild: explicitly specify the build id style
  scripts/setlocalversion: make git describe output more reliable
  kbuild: remove cc-option test of -Werror=date-time
  kbuild: remove cc-option test of -fno-stack-check
  kbuild: remove cc-option test of -fno-strict-overflow
  kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
  kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
  kbuild: do not create built-in objects for external module builds
  ...
treewide: remove DISABLE_LTO 2020-10-20T15:28:53+00:00 Sami Tolvanen samitolvanen@google.com 2020-10-13T00:31:45+00:00 0f6372e522237f39aff63f2e158d629038f26238 This change removes all instances of DISABLE_LTO from Makefiles, as they are currently unused, and the preferred method of disabling LTO is to filter out the flags instead. Note added by Masahiro Yamada: DISABLE_LTO was added as preparation for GCC LTO, but GCC LTO was not pulled into the mainline. (https://lkml.org/lkml/2014/4/8/272) Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> 
This change removes all instances of DISABLE_LTO from
Makefiles, as they are currently unused, and the preferred
method of disabling LTO is to filter out the flags instead.

Note added by Masahiro Yamada:
DISABLE_LTO was added as preparation for GCC LTO, but GCC LTO was
not pulled into the mainline. (https://lkml.org/lkml/2014/4/8/272)

Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Merge tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2020-10-18T21:34:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-18T21:34:50+00:00 41eea65e2aaadc0611fd56a1b177ce25dcc4c1df Pull RCU changes from Ingo Molnar: - Debugging for smp_call_function() - RT raw/non-raw lock ordering fixes - Strict grace periods for KASAN - New smp_call_function() torture test - Torture-test updates - Documentation updates - Miscellaneous fixes [ This doesn't actually pull the tag - I've dropped the last merge from the RCU branch due to questions about the series. - Linus ] * tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits) smp: Make symbol 'csd_bug_count' static kernel/smp: Provide CSD lock timeout diagnostics smp: Add source and destination CPUs to __call_single_data rcu: Shrink each possible cpu krcp rcu/segcblist: Prevent useless GP start if no CBs to accelerate torture: Add gdb support rcutorture: Allow pointer leaks to test diagnostic code rcutorture: Hoist OOM registry up one level refperf: Avoid null pointer dereference when buf fails to allocate rcutorture: Properly synchronize with OOM notifier rcutorture: Properly set rcu_fwds for OOM handling torture: Add kvm.sh --help and update help message rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05 torture: Update initrd documentation rcutorture: Replace HTTP links with HTTPS ones locktorture: Make function torture_percpu_rwsem_init() static torture: document --allcpus argument added to the kvm.sh script rcutorture: Output number of elapsed grace periods rcutorture: Remove KCSAN stubs rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp() ... 
Pull RCU changes from Ingo Molnar:

 - Debugging for smp_call_function()

 - RT raw/non-raw lock ordering fixes

 - Strict grace periods for KASAN

 - New smp_call_function() torture test

 - Torture-test updates

 - Documentation updates

 - Miscellaneous fixes

[ This doesn't actually pull the tag - I've dropped the last merge from
  the RCU branch due to questions about the series.   - Linus ]

* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
  smp: Make symbol 'csd_bug_count' static
  kernel/smp: Provide CSD lock timeout diagnostics
  smp: Add source and destination CPUs to __call_single_data
  rcu: Shrink each possible cpu krcp
  rcu/segcblist: Prevent useless GP start if no CBs to accelerate
  torture: Add gdb support
  rcutorture: Allow pointer leaks to test diagnostic code
  rcutorture: Hoist OOM registry up one level
  refperf: Avoid null pointer dereference when buf fails to allocate
  rcutorture: Properly synchronize with OOM notifier
  rcutorture: Properly set rcu_fwds for OOM handling
  torture: Add kvm.sh --help and update help message
  rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
  torture: Update initrd documentation
  rcutorture: Replace HTTP links with HTTPS ones
  locktorture: Make function torture_percpu_rwsem_init() static
  torture: document --allcpus argument added to the kvm.sh script
  rcutorture: Output number of elapsed grace periods
  rcutorture: Remove KCSAN stubs
  rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
  ...