linux-toradex.git/kernel/audit.c, branch v2.6.38.5

audit: error message typo correction

2010-11-03T17:49:58+00:00

Fixes a typo in the error message raised by audit when auditd has died.

Signed-off-by: Ross Kirk 

--
Signed-off-by: Jiri Kosina

audit: Use rcu for task lookup protection

2010-10-30T12:45:42+00:00

Protect the task lookups in audit_receive_msg() with rcu_read_lock()
instead of tasklist_lock and use lock/unlock_sighand to protect
against the exit race.

Signed-off-by: Thomas Gleixner 
Cc: Al Viro 
Cc: Eric Paris 
Cc: Oleg Nesterov 
Signed-off-by: Al Viro

audit: Do not send uninitialized data for AUDIT_TTY_GET

2010-10-30T12:45:42+00:00

audit_receive_msg() sends uninitialized data for AUDIT_TTY_GET when
the task was not found.

Send reply only when task was found.

Signed-off-by: Thomas Gleixner 
Cc: Al Viro 
Cc: Eric Paris 
Signed-off-by: Al Viro

audit: Call tty_audit_push_task() outside preempt disabled

2010-10-30T12:45:25+00:00

While auditing all tasklist_lock read_lock sites I stumbled over the
following call chain:

audit_prepare_user_tty()
  read_lock(&tasklist_lock);
  tty_audit_push_task();
     mutex_lock(&buf->mutex);

     --> buf->mutex is locked with preemption disabled.

Solve this by acquiring a reference to the task struct under
rcu_read_lock and call tty_audit_push_task outside of the preempt
disabled region.

Move all code which needs to be protected by sighand lock into
tty_audit_push_task() and use lock/unlock_sighand as we do not hold
tasklist_lock.

Signed-off-by: Thomas Gleixner 
Cc: Al Viro 
Cc: Eric Paris 
Cc: Oleg Nesterov 
Signed-off-by: Al Viro

audit: make functions static

2010-10-30T05:42:19+00:00

I was doing some namespace checks and found some simple stuff in
audit that could be cleaned up. Make some functions static, and
put const on make_reply payload arg.

Signed-off-by: Stephen Hemminger 
Signed-off-by: Al Viro

Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify

2010-08-10T18:39:13+00:00

* 'for-linus' of git://git.infradead.org/users/eparis/notify: (132 commits)
  fanotify: use both marks when possible
  fsnotify: pass both the vfsmount mark and inode mark
  fsnotify: walk the inode and vfsmount lists simultaneously
  fsnotify: rework ignored mark flushing
  fsnotify: remove global fsnotify groups lists
  fsnotify: remove group->mask
  fsnotify: remove the global masks
  fsnotify: cleanup should_send_event
  fanotify: use the mark in handler functions
  audit: use the mark in handler functions
  dnotify: use the mark in handler functions
  inotify: use the mark in handler functions
  fsnotify: send fsnotify_mark to groups in event handling functions
  fsnotify: Exchange list heads instead of moving elements
  fsnotify: srcu to protect read side of inode and vfsmount locks
  fsnotify: use an explicit flag to indicate fsnotify_destroy_mark has been called
  fsnotify: use _rcu functions for mark list traversal
  fsnotify: place marks on object in order of group memory address
  vfs/fsnotify: fsnotify_close can delay the final work in fput
  fsnotify: store struct file not struct path
  ...

Fix up trivial delete/modify conflict in fs/notify/inotify/inotify.c.

Audit: clean up the audit_watch split

2010-07-28T13:58:16+00:00

No real changes, just cleanup to the audit_watch split patch which we done
with minimal code changes for easy review.  Now fix interfaces to make
things work better.

Signed-off-by: Eric Paris

drop_monitor: convert some kfree_skb call sites to consume_skb

2010-07-20T20:28:05+00:00

Convert a few calls from kfree_skb to consume_skb

Noticed while I was working on dropwatch that I was detecting lots of internal
skb drops in several places.  While some are legitimate, several were not,
freeing skbs that were at the end of their life, rather than being discarded due
to an error.  This patch converts those calls sites from using kfree_skb to
consume_skb, which quiets the in-kernel drop_monitor code from detecting them as
drops.  Tested successfully by myself

Signed-off-by: Neil Horman 
Signed-off-by: David S. Miller

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo 
Guess-its-ok-by: Christoph Lameter 
Cc: Ingo Molnar 
Cc: Lee Schermerhorn

Fix misspelling of "should" and "shouldn't" in comments.

2010-02-05T11:22:30+00:00

Some comments misspell "should" or "shouldn't"; this fixes them. No code changes.

Signed-off-by: Adam Buchbinder 
Signed-off-by: Jiri Kosina