Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Replace busylock at the Tx queuing layer with a lockless list.

     Resulting in a 300% (4x) improvement on heavy TX workloads, sending
     twice the number of packets per second, for half the cpu cycles.

   - Allow constantly busy flows to migrate to a more suitable CPU/NIC
     queue.

     Normally we perform queue re-selection when flow comes out of idle,
     but under extreme circumstances the flows may be constantly busy.

     Add sysctl to allow periodic rehashing even if it'd risk packet
     reordering.

   - Optimize the NAPI skb cache, make it larger, use it in more paths.

   - Attempt returning Tx skbs to the originating CPU (like we already
     did for Rx skbs).

   - Various data structure layout and prefetch optimizations from Eric.

   - Remove ktime_get() from the recvmsg() fast path, ktime_get() is
     sadly quite expensive on recent AMD machines.

   - Extend threaded NAPI polling to allow the kthread busy poll for
     packets.

   - Make MPTCP use Rx backlog processing. This lowers the lock
     pressure, improving the Rx performance.

   - Support memcg accounting of MPTCP socket memory.

   - Allow admin to opt sockets out of global protocol memory accounting
     (using a sysctl or BPF-based policy). The global limits are a poor
     fit for modern container workloads, where limits are imposed using
     cgroups.

   - Improve heuristics for when to kick off AF_UNIX garbage collection.

   - Allow users to control TCP SACK compression, and default to 33% of
     RTT.

   - Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
     unnecessarily aggressive rcvbuf growth and overshot when the
     connection RTT is low.

   - Preserve skb metadata space across skb_push / skb_pull operations.

   - Support for IPIP encapsulation in the nftables flowtable offload.

   - Support appending IP interface information to ICMP messages (RFC
     5837).

   - Support setting max record size in TLS (RFC 8449).

   - Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.

   - Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.

   - Let users configure the number of write buffers in SMC.

   - Add new struct sockaddr_unsized for sockaddr of unknown length,
     from Kees.

   - Some conversions away from the crypto_ahash API, from Eric Biggers.

   - Some preparations for slimming down struct page.

   - YAML Netlink protocol spec for WireGuard.

   - Add a tool on top of YAML Netlink specs/lib for reporting commonly
     computed derived statistics and summarized system state.

  Driver API:

   - Add CAN XL support to the CAN Netlink interface.

   - Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
     defined by the OPEN Alliance's "Advanced diagnostic features for
     100BASE-T1 automotive Ethernet PHYs" specification.

   - Add DPLL phase-adjust-gran pin attribute (and implement it in
     zl3073x).

   - Refactor xfrm_input lock to reduce contention when NIC offloads
     IPsec and performs RSS.

   - Add info to devlink params whether the current setting is the
     default or a user override. Allow resetting back to default.

   - Add standard device stats for PSP crypto offload.

   - Leverage DSA frame broadcast to implement simple HSR frame
     duplication for a lot of switches without dedicated HSR offload.

   - Add uAPI defines for 1.6Tbps link modes.

  Device drivers:

   - Add Motorcomm YT921x gigabit Ethernet switch support.

   - Add MUCSE driver for N500/N210 1GbE NIC series.

   - Convert drivers to support dedicated ops for timestamping control,
     and away from the direct IOCTL handling. While at it support GET
     operations for PHY timestamping.

   - Add (and convert most drivers to) a dedicated ethtool callback for
     reading the Rx ring count.

   - Significant refactoring efforts in the STMMAC driver, which
     supports Synopsys turn-key MAC IP integrated into a ton of SoCs.

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support PPS in/out on all pins
      - Intel (100G, ice, idpf):
         - ice: implement standard ethtool and timestamping stats
         - i40e: support setting the max number of MAC addresses per VF
         - iavf: support RSS of GTP tunnels for 5G and LTE deployments
      - nVidia/Mellanox (mlx5):
         - reduce downtime on interface reconfiguration
         - disable being an XDP redirect target by default (same as
           other drivers) to avoid wasting resources if feature is
           unused
      - Meta (fbnic):
         - add support for Linux-managed PCS on 25G, 50G, and 100G links
      - Wangxun:
         - support Rx descriptor merge, and Tx head writeback
         - support Rx coalescing offload
         - support 25G SPF and 40G QSFP modules

   - Ethernet virtual:
      - Google (gve):
         - allow ethtool to configure rx_buf_len
         - implement XDP HW RX Timestamping support for DQ descriptor
           format
      - Microsoft vNIC (mana):
         - support HW link state events
         - handle hardware recovery events when probing the device

   - Ethernet NICs consumer, and embedded:
      - usbnet: add support for Byte Queue Limits (BQL)
      - AMD (amd-xgbe):
         - add device selftests
      - NXP (enetc):
         - add i.MX94 support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - bcmasp: add support for PHY-based Wake-on-LAN
      - Broadcom switches (b53):
         - support port isolation
         - support BCM5389/97/98 and BCM63XX ARL formats
      - Lantiq/MaxLinear switches:
         - support bridge FDB entries on the CPU port
         - use regmap for register access
         - allow user to enable/disable learning
         - support Energy Efficient Ethernet
         - support configuring RMII clock delays
         - add tagging driver for MaxLinear GSW1xx switches
      - Synopsys (stmmac):
         - support using the HW clock in free running mode
         - add Eswin EIC7700 support
         - add Rockchip RK3506 support
         - add Altera Agilex5 support
      - Cadence (macb):
         - cleanup and consolidate descriptor and DMA address handling
         - add EyeQ5 support
      - TI:
         - icssg-prueth: support AF_XDP
      - Airoha access points:
         - add missing Ethernet stats and link state callback
         - add AN7583 support
         - support out-of-order Tx completion processing
      - Power over Ethernet:
         - pd692x0: preserve PSE configuration across reboots
         - add support for TPS23881B devices

   - Ethernet PHYs:
      - Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
      - Support 50G SerDes and 100G interfaces in Linux-managed PHYs
      - micrel:
         - support for non PTP SKUs of lan8814
         - enable in-band auto-negotiation on lan8814
      - realtek:
         - cable testing support on RTL8224
         - interrupt support on RTL8221B
      - motorcomm: support for PHY LEDs on YT853
      - microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
      - mscc: support for PHY LED control

   - CAN drivers:
      - m_can: add support for optional reset and system wake up
      - remove can_change_mtu() obsoleted by core handling
      - mcp251xfd: support GPIO controller functionality

   - Bluetooth:
      - add initial support for PASTa

   - WiFi:
      - split ieee80211.h file, it's way too big
      - improvements in VHT radiotap reporting, S1G, Channel Switch
        Announcement handling, rate tracking in mesh networks
      - improve multi-radio monitor mode support, and add a cfg80211
        debugfs interface for it
      - HT action frame handling on 6 GHz
      - initial chanctx work towards NAN
      - MU-MIMO sniffer improvements

   - WiFi drivers:
      - RealTek (rtw89):
         - support USB devices RTL8852AU and RTL8852CU
         - initial work for RTL8922DE
         - improved injection support
      - Intel:
         - iwlwifi: new sniffer API support
      - MediaTek (mt76):
         - WED support for >32-bit DMA
         - airoha NPU support
         - regdomain improvements
         - continued WiFi7/MLO work
      - Qualcomm/Atheros:
         - ath10k: factory test support
         - ath11k: TX power insertion support
         - ath12k: BSS color change support
         - ath12k: statistics improvements
      - brcmfmac: Acer A1 840 tablet quirk
      - rtl8xxxu: 40 MHz connection fixes/support"

* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
  net: page_pool: sanitise allocation order
  net: page pool: xa init with destroy on pp init
  net/mlx5e: Support XDP target xmit with dummy program
  net/mlx5e: Update XDP features in switch channels
  selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
  net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
  wireguard: netlink: generate netlink code
  wireguard: uapi: generate header with ynl-gen
  wireguard: uapi: move flag enums
  wireguard: uapi: move enum wg_cmd
  wireguard: netlink: add YNL specification
  selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
  selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
  selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
  selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
  selftests: drv-net: introduce Iperf3Runner for measurement use cases
  selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
  net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
  Documentation: net: dsa: mention simple HSR offload helpers
  Documentation: net: dsa: mention availability of RedBox
  ...

Cross-merge networking fixes after downstream PR (net-6.18-rc7).

No conflicts, adjacent changes:

tools/testing/selftests/net/af_unix/Makefile
  e1bb28bf13f4 ("selftest: af_unix: Add test for SO_PEEK_OFF.")
  45a1cd8346ca ("selftests: af_unix: Add tests for ECONNRESET and EOF semantics")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cross-merge BPF and other fixes after downstream PR.

Minor conflict in kernel/bpf/helpers.c

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

bpf_try_get_buffers() returns one of multiple per-CPU buffers based on a
per-CPU nesting counter. This mechanism expects that buffers are not
endlessly acquired before being returned. migrate_disable() ensures that a
task remains on the same CPU, but it does not prevent the task from being
preempted by another task on that CPU.

Without disabled preemption, a task may be preempted while holding a
buffer, allowing another task to run on same CPU and acquire an
additional buffer. Several such preemptions can cause the per-CPU
nest counter to exceed MAX_BPRINTF_NEST_LEVEL and trigger the warning in
bpf_try_get_buffers(). Adding preempt_disable()/preempt_enable() around
buffer acquisition and release prevents this task preemption and
preserves the intended bounded nesting behavior.

Reported-by: syzbot+b0cff308140f79a9c4cb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68f6a4c8.050a0220.1be48.0011.GAE@google.com/
Fixes: 4223bf833c849 ("bpf: Remove preempt_disable in bpf_try_get_buffers")
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sahil Chandna <chandna.sahil@gmail.com>
Link: https://lore.kernel.org/r/20251114064922.11650-1-chandna.sahil@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Currently bpf_dynptr_from_skb_meta() marks the dynptr as read-only when
the skb is cloned, preventing writes to metadata.

Remove this restriction and unclone the skb head on bpf_dynptr_write() to
metadata, now that the metadata is preserved during uncloning. This makes
metadata dynptr consistent with skb dynptr, allowing writes regardless of
whether the skb is cloned.

Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-3-5ceb08a9b37b@cloudflare.com

Rename bpf_stream_vprintk() to bpf_stream_vprintk_impl().

This makes bpf_stream_vprintk() follow the already established "_impl"
suffix-based naming convention for kfuncs with the bpf_prog_aux
argument provided by the verifier implicitly. This convention will be
taken advantage of with the upcoming KF_IMPLICIT_ARGS feature to
preserve backwards compatibility to BPF programs.

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-2-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>

Rename:
bpf_task_work_schedule_resume()->bpf_task_work_schedule_resume_impl()
bpf_task_work_schedule_signal()->bpf_task_work_schedule_signal_impl()

This aligns task work scheduling kfuncs with the established naming
scheme for kfuncs with the bpf_prog_aux argument provided by the
verifier implicitly. This convention will be taken advantage of with the
upcoming KF_IMPLICIT_ARGS feature to preserve backwards compatibility to
BPF programs.

Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-1-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>

Cross-merge BPF and other fixes after downstream PR.
No conflicts.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

File dynptr reads may sleep when the requested folios are not in
the page cache. To avoid sleeping in non-sleepable contexts while still
supporting valid sleepable use, given that dynptrs are non-sleepable by
default, enable sleeping only when bpf_dynptr_from_file() is invoked
from a sleepable context.

This change:
  * Introduces a sleepable constructor: bpf_dynptr_from_file_sleepable()
  * Override non-sleepable constructor with sleepable if it's always
  called in sleepable context

Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-10-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add support for file dynptr.

Introduce struct bpf_dynptr_file_impl to hold internal state for file
dynptrs, with 64-bit size and offset support.

Introduce lifecycle management kfuncs:
  - bpf_dynptr_from_file() for initialization
  - bpf_dynptr_file_discard() for destruction

Extend existing helpers to support file dynptrs in:
  - bpf_dynptr_read()
  - bpf_dynptr_slice()

Write helpers (bpf_dynptr_write() and bpf_dynptr_data()) are not
modified, as file dynptr is read-only.

Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-8-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>