linux-toradex.git/kernel/cgroup/cpuset.c, branch v5.5 Linux kernel for Apalis and Colibri modules Merge branch 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup 2019-11-26T03:23:46+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-11-26T03:23:46+00:00 1b96a41b420972f8ba563373de8154d59d5b2208 Pull cgroup updates from Tejun Heo: "There are several notable changes here: - Single thread migrating itself has been optimized so that it doesn't need threadgroup rwsem anymore. - Freezer optimization to avoid unnecessary frozen state changes. - cgroup ID unification so that cgroup fs ino is the only unique ID used for the cgroup and can be used to directly look up live cgroups through filehandle interface on 64bit ino archs. On 32bit archs, cgroup fs ino is still the only ID in use but it is only unique when combined with gen. - selftest and other changes" * 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits) writeback: fix -Wformat compilation warnings docs: cgroup: mm: Fix spelling of "list" cgroup: fix incorrect WARN_ON_ONCE() in cgroup_setup_root() cgroup: use cgrp->kn->id as the cgroup ID kernfs: use 64bit inos if ino_t is 64bit kernfs: implement custom exportfs ops and fid type kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id() kernfs: convert kernfs_node->id from union kernfs_node_id to u64 kernfs: kernfs_find_and_get_node_by_ino() should only look up activated nodes kernfs: use dumber locking for kernfs_find_and_get_node_by_ino() netprio: use css ID instead of cgroup ID writeback: use ino_t for inodes in tracepoints kernfs: fix ino wrap-around detection kselftests: cgroup: Avoid the reuse of fd after it is deallocated cgroup: freezer: don't change task and cgroups status unnecessarily cgroup: use cgroup->last_bstat instead of cgroup->bstat_pending for consistency cgroup: remove cgroup_enable_task_cg_lists() optimization cgroup: pids: use atomic64_t for pids->limit selftests: cgroup: Run test_core under interfering stress selftests: cgroup: Add task migration tests ... 
Pull cgroup updates from Tejun Heo:
 "There are several notable changes here:

   - Single thread migrating itself has been optimized so that it
     doesn't need threadgroup rwsem anymore.

   - Freezer optimization to avoid unnecessary frozen state changes.

   - cgroup ID unification so that cgroup fs ino is the only unique ID
     used for the cgroup and can be used to directly look up live
     cgroups through filehandle interface on 64bit ino archs. On 32bit
     archs, cgroup fs ino is still the only ID in use but it is only
     unique when combined with gen.

   - selftest and other changes"

* 'for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (24 commits)
  writeback: fix -Wformat compilation warnings
  docs: cgroup: mm: Fix spelling of "list"
  cgroup: fix incorrect WARN_ON_ONCE() in cgroup_setup_root()
  cgroup: use cgrp->kn->id as the cgroup ID
  kernfs: use 64bit inos if ino_t is 64bit
  kernfs: implement custom exportfs ops and fid type
  kernfs: combine ino/id lookup functions into kernfs_find_and_get_node_by_id()
  kernfs: convert kernfs_node->id from union kernfs_node_id to u64
  kernfs: kernfs_find_and_get_node_by_ino() should only look up activated nodes
  kernfs: use dumber locking for kernfs_find_and_get_node_by_ino()
  netprio: use css ID instead of cgroup ID
  writeback: use ino_t for inodes in tracepoints
  kernfs: fix ino wrap-around detection
  kselftests: cgroup: Avoid the reuse of fd after it is deallocated
  cgroup: freezer: don't change task and cgroups status unnecessarily
  cgroup: use cgroup->last_bstat instead of cgroup->bstat_pending for consistency
  cgroup: remove cgroup_enable_task_cg_lists() optimization
  cgroup: pids: use atomic64_t for pids->limit
  selftests: cgroup: Run test_core under interfering stress
  selftests: cgroup: Add task migration tests
  ...
sched/topology: Don't try to build empty sched domains 2019-10-29T08:58:45+00:00 Valentin Schneider valentin.schneider@arm.com 2019-10-23T15:37:44+00:00 cd1cb3350561d2bf544ddfef76fbf0b1c9c7178f Turns out hotplugging CPUs that are in exclusive cpusets can lead to the cpuset code feeding empty cpumasks to the sched domain rebuild machinery. This leads to the following splat: Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 235 Comm: kworker/5:2 Not tainted 5.4.0-rc1-00005-g8d495477d62e #23 Hardware name: ARM Juno development board (r0) (DT) Workqueue: events cpuset_hotplug_workfn pstate: 60000005 (nZCv daif -PAN -UAO) pc : build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969) lr : build_sched_domains (kernel/sched/topology.c:1966) Call trace: build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969) partition_sched_domains_locked (kernel/sched/topology.c:2250) rebuild_sched_domains_locked (./include/linux/bitmap.h:370 ./include/linux/cpumask.h:538 kernel/cgroup/cpuset.c:955 kernel/cgroup/cpuset.c:978 kernel/cgroup/cpuset.c:1019) rebuild_sched_domains (kernel/cgroup/cpuset.c:1032) cpuset_hotplug_workfn (kernel/cgroup/cpuset.c:3205 (discriminator 2)) process_one_work (./arch/arm64/include/asm/jump_label.h:21 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:114 kernel/workqueue.c:2274) worker_thread (./include/linux/compiler.h:199 ./include/linux/list.h:268 kernel/workqueue.c:2416) kthread (kernel/kthread.c:255) ret_from_fork (arch/arm64/kernel/entry.S:1167) Code: f860dae2 912802d6 aa1603e1 12800000 (f8616853) The faulty line in question is: cap = arch_scale_cpu_capacity(cpumask_first(cpu_map)); and we're not checking the return value against nr_cpu_ids (we shouldn't have to!), which leads to the above. Prevent generate_sched_domains() from returning empty cpumasks, and add some assertion in build_sched_domains() to scream bloody murder if it happens again. The above splat was obtained on my Juno r0 with the following reproducer: $ cgcreate -g cpuset:asym $ cgset -r cpuset.cpus=0-3 asym $ cgset -r cpuset.mems=0 asym $ cgset -r cpuset.cpu_exclusive=1 asym $ cgcreate -g cpuset:smp $ cgset -r cpuset.cpus=4-5 smp $ cgset -r cpuset.mems=0 smp $ cgset -r cpuset.cpu_exclusive=1 smp $ cgset -r cpuset.sched_load_balance=0 . $ echo 0 > /sys/devices/system/cpu/cpu4/online $ echo 0 > /sys/devices/system/cpu/cpu5/online Signed-off-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar.Eggemann@arm.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: hannes@cmpxchg.org Cc: lizefan@huawei.com Cc: morten.rasmussen@arm.com Cc: qperret@google.com Cc: tj@kernel.org Cc: vincent.guittot@linaro.org Fixes: 05484e098448 ("sched/topology: Add SD_ASYM_CPUCAPACITY flag detection") Link: https://lkml.kernel.org/r/20191023153745.19515-2-valentin.schneider@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Turns out hotplugging CPUs that are in exclusive cpusets can lead to the
cpuset code feeding empty cpumasks to the sched domain rebuild machinery.

This leads to the following splat:

    Internal error: Oops: 96000004 [#1] PREEMPT SMP
    Modules linked in:
    CPU: 0 PID: 235 Comm: kworker/5:2 Not tainted 5.4.0-rc1-00005-g8d495477d62e #23
    Hardware name: ARM Juno development board (r0) (DT)
    Workqueue: events cpuset_hotplug_workfn
    pstate: 60000005 (nZCv daif -PAN -UAO)
    pc : build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969)
    lr : build_sched_domains (kernel/sched/topology.c:1966)
    Call trace:
    build_sched_domains (./include/linux/arch_topology.h:23 kernel/sched/topology.c:1898 kernel/sched/topology.c:1969)
    partition_sched_domains_locked (kernel/sched/topology.c:2250)
    rebuild_sched_domains_locked (./include/linux/bitmap.h:370 ./include/linux/cpumask.h:538 kernel/cgroup/cpuset.c:955 kernel/cgroup/cpuset.c:978 kernel/cgroup/cpuset.c:1019)
    rebuild_sched_domains (kernel/cgroup/cpuset.c:1032)
    cpuset_hotplug_workfn (kernel/cgroup/cpuset.c:3205 (discriminator 2))
    process_one_work (./arch/arm64/include/asm/jump_label.h:21 ./include/linux/jump_label.h:200 ./include/trace/events/workqueue.h:114 kernel/workqueue.c:2274)
    worker_thread (./include/linux/compiler.h:199 ./include/linux/list.h:268 kernel/workqueue.c:2416)
    kthread (kernel/kthread.c:255)
    ret_from_fork (arch/arm64/kernel/entry.S:1167)
    Code: f860dae2 912802d6 aa1603e1 12800000 (f8616853)

The faulty line in question is:

  cap = arch_scale_cpu_capacity(cpumask_first(cpu_map));

and we're not checking the return value against nr_cpu_ids (we shouldn't
have to!), which leads to the above.

Prevent generate_sched_domains() from returning empty cpumasks, and add
some assertion in build_sched_domains() to scream bloody murder if it
happens again.

The above splat was obtained on my Juno r0 with the following reproducer:

  $ cgcreate -g cpuset:asym
  $ cgset -r cpuset.cpus=0-3 asym
  $ cgset -r cpuset.mems=0 asym
  $ cgset -r cpuset.cpu_exclusive=1 asym

  $ cgcreate -g cpuset:smp
  $ cgset -r cpuset.cpus=4-5 smp
  $ cgset -r cpuset.mems=0 smp
  $ cgset -r cpuset.cpu_exclusive=1 smp

  $ cgset -r cpuset.sched_load_balance=0 .

  $ echo 0 > /sys/devices/system/cpu/cpu4/online
  $ echo 0 > /sys/devices/system/cpu/cpu5/online

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar.Eggemann@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hannes@cmpxchg.org
Cc: lizefan@huawei.com
Cc: morten.rasmussen@arm.com
Cc: qperret@google.com
Cc: tj@kernel.org
Cc: vincent.guittot@linaro.org
Fixes: 05484e098448 ("sched/topology: Add SD_ASYM_CPUCAPACITY flag detection")
Link: https://lkml.kernel.org/r/20191023153745.19515-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cgroup: remove cgroup_enable_task_cg_lists() optimization 2019-10-25T12:56:28+00:00 Tejun Heo tj@kernel.org 2019-10-24T19:03:51+00:00 5153faac18d293fc7abb19ff7034683fbcd82dc7 cgroup_enable_task_cg_lists() is used to lazyily initialize task cgroup associations on the first use to reduce fork / exit overheads on systems which don't use cgroup. Unfortunately, locking around it has never been actually correct and its value is dubious given how the vast majority of systems use cgroup right away from boot. This patch removes the optimization. For now, replace the cg_list based branches with WARN_ON_ONCE()'s to be on the safe side. We can simplify the logic further in the future. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> 
cgroup_enable_task_cg_lists() is used to lazyily initialize task
cgroup associations on the first use to reduce fork / exit overheads
on systems which don't use cgroup.  Unfortunately, locking around it
has never been actually correct and its value is dubious given how the
vast majority of systems use cgroup right away from boot.

This patch removes the optimization.  For now, replace the cg_list
based branches with WARN_ON_ONCE()'s to be on the safe side.  We can
simplify the logic further in the future.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
sched/core: Prevent race condition between cpuset and __sched_setscheduler() 2019-07-25T13:55:04+00:00 Juri Lelli juri.lelli@redhat.com 2019-07-19T14:00:00+00:00 710da3c8ea7dfbd327920afd3831d8c82c42789d No synchronisation mechanism exists between the cpuset subsystem and calls to function __sched_setscheduler(). As such, it is possible that new root domains are created on the cpuset side while a deadline acceptance test is carried out in __sched_setscheduler(), leading to a potential oversell of CPU bandwidth. Grab cpuset_rwsem read lock from core scheduler, so to prevent situations such as the one described above from happening. The only exception is normalize_rt_tasks() which needs to work under tasklist_lock and can't therefore grab cpuset_rwsem. We are fine with this, as this function is only called by sysrq and, if that gets triggered, DEADLINE guarantees are already gone out of the window anyway. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: mathieu.poirier@linaro.org Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-9-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 
No synchronisation mechanism exists between the cpuset subsystem and
calls to function __sched_setscheduler(). As such, it is possible that
new root domains are created on the cpuset side while a deadline
acceptance test is carried out in __sched_setscheduler(), leading to a
potential oversell of CPU bandwidth.

Grab cpuset_rwsem read lock from core scheduler, so to prevent
situations such as the one described above from happening.

The only exception is normalize_rt_tasks() which needs to work under
tasklist_lock and can't therefore grab cpuset_rwsem. We are fine with
this, as this function is only called by sysrq and, if that gets
triggered, DEADLINE guarantees are already gone out of the window
anyway.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-9-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cgroup/cpuset: Change cpuset_rwsem and hotplug lock order 2019-07-25T13:55:03+00:00 Juri Lelli juri.lelli@redhat.com 2019-07-19T13:59:58+00:00 d74b27d63a8bebe2fe634944e4ebdc7b10db7a39 cpuset_rwsem is going to be acquired from sched_setscheduler() with a following patch. There are however paths (e.g., spawn_ksoftirqd) in which sched_scheduler() is eventually called while holding hotplug lock; this creates a dependecy between hotplug lock (to be always acquired first) and cpuset_rwsem (to be always acquired after hotplug lock). Fix paths which currently take the two locks in the wrong order (after a following patch is applied). Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: mathieu.poirier@linaro.org Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-7-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 
cpuset_rwsem is going to be acquired from sched_setscheduler() with a
following patch. There are however paths (e.g., spawn_ksoftirqd) in
which sched_scheduler() is eventually called while holding hotplug lock;
this creates a dependecy between hotplug lock (to be always acquired
first) and cpuset_rwsem (to be always acquired after hotplug lock).

Fix paths which currently take the two locks in the wrong order (after
a following patch is applied).

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-7-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cgroup/cpuset: Convert cpuset_mutex to percpu_rwsem 2019-07-25T13:55:02+00:00 Juri Lelli juri.lelli@redhat.com 2019-07-19T13:59:57+00:00 1243dc518c9da467da6635313a2dbb41b8ffc275 Holding cpuset_mutex means that cpusets are stable (only the holder can make changes) and this is required for fixing a synchronization issue between cpusets and scheduler core. However, grabbing cpuset_mutex from setscheduler() hotpath (as implemented in a later patch) is a no-go, as it would create a bottleneck for tasks concurrently calling setscheduler(). Convert cpuset_mutex to be a percpu_rwsem (cpuset_rwsem), so that setscheduler() will then be able to read lock it and avoid concurrency issues. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: mathieu.poirier@linaro.org Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-6-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Holding cpuset_mutex means that cpusets are stable (only the holder can
make changes) and this is required for fixing a synchronization issue
between cpusets and scheduler core.  However, grabbing cpuset_mutex from
setscheduler() hotpath (as implemented in a later patch) is a no-go, as
it would create a bottleneck for tasks concurrently calling
setscheduler().

Convert cpuset_mutex to be a percpu_rwsem (cpuset_rwsem), so that
setscheduler() will then be able to read lock it and avoid concurrency
issues.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-6-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
cpusets: Rebuild root domain deadline accounting information 2019-07-25T13:55:01+00:00 Mathieu Poirier mathieu.poirier@linaro.org 2019-07-19T13:59:55+00:00 f9a25f776d780bfa3279f0b6e5f5cf3224997976 When the topology of root domains is modified by CPUset or CPUhotplug operations information about the current deadline bandwidth held in the root domain is lost. This patch addresses the issue by recalculating the lost deadline bandwidth information by circling through the deadline tasks held in CPUsets and adding their current load to the root domain they are associated with. Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> [ Various additional modifications. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bristot@redhat.com Cc: claudio@evidence.eu.com Cc: lizefan@huawei.com Cc: longman@redhat.com Cc: luca.abeni@santannapisa.it Cc: rostedt@goodmis.org Cc: tj@kernel.org Cc: tommaso.cucinotta@santannapisa.it Link: https://lkml.kernel.org/r/20190719140000.31694-4-juri.lelli@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 
When the topology of root domains is modified by CPUset or CPUhotplug
operations information about the current deadline bandwidth held in the
root domain is lost.

This patch addresses the issue by recalculating the lost deadline
bandwidth information by circling through the deadline tasks held in
CPUsets and adding their current load to the root domain they are
associated with.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
[ Various additional modifications. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-4-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Merge branch 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2019-07-19T17:42:02+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-07-19T17:42:02+00:00 933a90bf4f3505f8ec83bda21a3c7d70d7c2b426 Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ... 
Pull vfs mount updates from Al Viro:
 "The first part of mount updates.

  Convert filesystems to use the new mount API"

* 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
  mnt_init(): call shmem_init() unconditionally
  constify ksys_mount() string arguments
  don't bother with registering rootfs
  init_rootfs(): don't bother with init_ramfs_fs()
  vfs: Convert smackfs to use the new mount API
  vfs: Convert selinuxfs to use the new mount API
  vfs: Convert securityfs to use the new mount API
  vfs: Convert apparmorfs to use the new mount API
  vfs: Convert openpromfs to use the new mount API
  vfs: Convert xenfs to use the new mount API
  vfs: Convert gadgetfs to use the new mount API
  vfs: Convert oprofilefs to use the new mount API
  vfs: Convert ibmasmfs to use the new mount API
  vfs: Convert qib_fs/ipathfs to use the new mount API
  vfs: Convert efivarfs to use the new mount API
  vfs: Convert configfs to use the new mount API
  vfs: Convert binfmt_misc to use the new mount API
  convenience helper: get_tree_single()
  convenience helper get_tree_nodev()
  vfs: Kill sget_userns()
  ...
docs: cgroup-v1: add it to the admin-guide book 2019-07-15T14:03:02+00:00 Mauro Carvalho Chehab mchehab+samsung@kernel.org 2019-06-27T16:08:35+00:00 da82c92f1150f66afabf78d2c85ef9ac18dc6d38 Those files belong to the admin guide, so add them. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> 
Those files belong to the admin guide, so add them.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Merge branch 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup 2019-07-09T04:35:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-07-09T04:35:12+00:00 92c1d6522135050cb377a18cc6e30d08dfb87efb Pull cgroup updates from Tejun Heo: "Documentation updates and the addition of cgroup_parse_float() which will be used by new controllers including blk-iocost" * 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: docs: cgroup-v1: convert docs to ReST and rename to *.rst cgroup: Move cgroup_parse_float() implementation out of CONFIG_SYSFS cgroup: add cgroup_parse_float() 
Pull cgroup updates from Tejun Heo:
 "Documentation updates and the addition of cgroup_parse_float() which
  will be used by new controllers including blk-iocost"

* 'for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  docs: cgroup-v1: convert docs to ReST and rename to *.rst
  cgroup: Move cgroup_parse_float() implementation out of CONFIG_SYSFS
  cgroup: add cgroup_parse_float()