linux-toradex.git/kernel/cgroup, branch v7.0-rc1 Linux kernel for Apalis and Colibri modules Convert 'alloc_flex' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T01:06:51+00:00 323bbfcf1ef8836d0d2ad9e2c1f1c684f0e3b5b3 This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.

As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T00:37:42+00:00 bf4afc53b77aeaa48b5409da5c8da6bb4eff7f43 This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
treewide: Replace kmalloc with kmalloc_obj for non-scalar types 2026-02-21T09:02:28+00:00 Kees Cook kees@kernel.org 2026-02-21T07:49:23+00:00 69050f8d6d075dc01af7a5f2f550a8067510366f This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> 
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>
Merge tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2026-02-19T04:50:32+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-19T04:50:32+00:00 eeccf287a2a517954b57cf9d733b3cf5d47afa34 Pull more MM updates from Andrew Morton: - "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a couple of issues in the demotion code - pages were failed demotion and were finding themselves demoted into disallowed nodes (Bing Jiao) - "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare mapledtree race and performs a number of cleanups (Liam Howlett) - "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use them" implements a lot of cleanups following on from the conversion of the VMA flags into a bitmap (Lorenzo Stoakes) - "support batch checking of references and unmapping for large folios" implements batching to greatly improve the performance of reclaiming clean file-backed large folios (Baolin Wang) - "selftests/mm: add memory failure selftests" does as claimed (Miaohe Lin) * tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits) mm/page_alloc: clear page->private in free_pages_prepare() selftests/mm: add memory failure dirty pagecache test selftests/mm: add memory failure clean pagecache test selftests/mm: add memory failure anonymous page test mm: rmap: support batched unmapping for file large folios arm64: mm: implement the architecture-specific clear_flush_young_ptes() arm64: mm: support batch clearing of the young flag for large folios arm64: mm: factor out the address and ptep alignment into a new helper mm: rmap: support batched checks of the references for large folios tools/testing/vma: add VMA userland tests for VMA flag functions tools/testing/vma: separate out vma_internal.h into logical headers tools/testing/vma: separate VMA userland tests into separate files mm: make vm_area_desc utilise vma_flags_t only mm: update all remaining mmap_prepare users to use vma_flags_t mm: update shmem_[kernel]_file_*() functions to use vma_flags_t mm: update secretmem to use VMA flags on mmap_prepare mm: update hugetlbfs to use VMA flags on mmap_prepare mm: add basic VMA flag operation helper functions tools: bitmap: add missing bitmap_[subset(), andnot()] mm: add mk_vma_flags() bitmap flag macro helper ... 
Pull more MM  updates from Andrew Morton:

 - "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
   couple of issues in the demotion code - pages were failed demotion
   and were finding themselves demoted into disallowed nodes (Bing Jiao)

 - "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
   mapledtree race and performs a number of cleanups (Liam Howlett)

 - "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
   them" implements a lot of cleanups following on from the conversion
   of the VMA flags into a bitmap (Lorenzo Stoakes)

 - "support batch checking of references and unmapping for large folios"
   implements batching to greatly improve the performance of reclaiming
   clean file-backed large folios (Baolin Wang)

 - "selftests/mm: add memory failure selftests" does as claimed (Miaohe
   Lin)

* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
  mm/page_alloc: clear page->private in free_pages_prepare()
  selftests/mm: add memory failure dirty pagecache test
  selftests/mm: add memory failure clean pagecache test
  selftests/mm: add memory failure anonymous page test
  mm: rmap: support batched unmapping for file large folios
  arm64: mm: implement the architecture-specific clear_flush_young_ptes()
  arm64: mm: support batch clearing of the young flag for large folios
  arm64: mm: factor out the address and ptep alignment into a new helper
  mm: rmap: support batched checks of the references for large folios
  tools/testing/vma: add VMA userland tests for VMA flag functions
  tools/testing/vma: separate out vma_internal.h into logical headers
  tools/testing/vma: separate VMA userland tests into separate files
  mm: make vm_area_desc utilise vma_flags_t only
  mm: update all remaining mmap_prepare users to use vma_flags_t
  mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
  mm: update secretmem to use VMA flags on mmap_prepare
  mm: update hugetlbfs to use VMA flags on mmap_prepare
  mm: add basic VMA flag operation helper functions
  tools: bitmap: add missing bitmap_[subset(), andnot()]
  mm: add mk_vma_flags() bitmap flag macro helper
  ...
mm/vmscan: fix demotion targets checks in reclaim/demotion 2026-02-12T23:42:52+00:00 Bing Jiao bingjiao@google.com 2026-01-14T20:53:02+00:00 1aceed565ff172fc0331dd1d5e7e65139b711139 Patch series "mm/vmscan: fix demotion targets checks in reclaim/demotion", v9. This patch series addresses two issues in demote_folio_list(), can_demote(), and next_demotion_node() in reclaim/demotion. 1. demote_folio_list() and can_demote() do not correctly check demotion target against cpuset.mems_effective, which will cause (a) pages to be demoted to not-allowed nodes and (b) pages fail demotion even if the system still has allowed demotion nodes. Patch 1 fixes this bug by updating cpuset_node_allowed() and mem_cgroup_node_allowed() to return effective_mems, allowing directly logic-and operation against demotion targets. 2. next_demotion_node() returns a preferred demotion target, but it does not check the node against allowed nodes. Patch 2 ensures that next_demotion_node() filters against the allowed node mask and selects the closest demotion target to the source node. This patch (of 2): Fix two bugs in demote_folio_list() and can_demote() due to incorrect demotion target checks against cpuset.mems_effective in reclaim/demotion. Commit 7d709f49babc ("vmscan,cgroup: apply mems_effective to reclaim") introduces the cpuset.mems_effective check and applies it to can_demote(). However: 1. It does not apply this check in demote_folio_list(), which leads to situations where pages are demoted to nodes that are explicitly excluded from the task's cpuset.mems. 2. It checks only the nodes in the immediate next demotion hierarchy and does not check all allowed demotion targets in can_demote(). This can cause pages to never be demoted if the nodes in the next demotion hierarchy are not set in mems_effective. These bugs break resource isolation provided by cpuset.mems. This is visible from userspace because pages can either fail to be demoted entirely or are demoted to nodes that are not allowed in multi-tier memory systems. To address these bugs, update cpuset_node_allowed() and mem_cgroup_node_allowed() to return effective_mems, allowing directly logic-and operation against demotion targets. Also update can_demote() and demote_folio_list() accordingly. Bug 1 reproduction: Assume a system with 4 nodes, where nodes 0-1 are top-tier and nodes 2-3 are far-tier memory. All nodes have equal capacity. Test script: echo 1 > /sys/kernel/mm/numa/demotion_enabled mkdir /sys/fs/cgroup/test echo +cpuset > /sys/fs/cgroup/cgroup.subtree_control echo "0-2" > /sys/fs/cgroup/test/cpuset.mems echo $$ > /sys/fs/cgroup/test/cgroup.procs swapoff -a # Expectation: Should respect node 0-2 limit. # Observation: Node 3 shows significant allocation (MemFree drops) stress-ng --oomable --vm 1 --vm-bytes 150% --mbind 0,1 Bug 2 reproduction: Assume a system with 6 nodes, where nodes 0-2 are top-tier, node 3 is a far-tier node, and nodes 4-5 are the farthest-tier nodes. All nodes have equal capacity. Test script: echo 1 > /sys/kernel/mm/numa/demotion_enabled mkdir /sys/fs/cgroup/test echo +cpuset > /sys/fs/cgroup/cgroup.subtree_control echo "0-2,4-5" > /sys/fs/cgroup/test/cpuset.mems echo $$ > /sys/fs/cgroup/test/cgroup.procs swapoff -a # Expectation: Pages are demoted to Nodes 4-5 # Observation: No pages are demoted before oom. stress-ng --oomable --vm 1 --vm-bytes 150% --mbind 0,1,2 Link: https://lkml.kernel.org/r/20260114205305.2869796-1-bingjiao@google.com Link: https://lkml.kernel.org/r/20260114205305.2869796-2-bingjiao@google.com Fixes: 7d709f49babc ("vmscan,cgroup: apply mems_effective to reclaim") Signed-off-by: Bing Jiao <bingjiao@google.com> Acked-by: Shakeel Butt <shakeel.butt@linux.dev> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Hildenbrand <david@kernel.org> Cc: Gregory Price <gourry@gourry.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Joshua Hahn <joshua.hahnjy@gmail.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Waiman Long <longman@redhat.com> Cc: Wei Xu <weixugc@google.com> Cc: Yuanchu Xie <yuanchu@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
Patch series "mm/vmscan: fix demotion targets checks in reclaim/demotion",
v9.

This patch series addresses two issues in demote_folio_list(),
can_demote(), and next_demotion_node() in reclaim/demotion.

1. demote_folio_list() and can_demote() do not correctly check
   demotion target against cpuset.mems_effective, which will cause (a)
   pages to be demoted to not-allowed nodes and (b) pages fail demotion
   even if the system still has allowed demotion nodes.

   Patch 1 fixes this bug by updating cpuset_node_allowed() and
   mem_cgroup_node_allowed() to return effective_mems, allowing directly
   logic-and operation against demotion targets.

2. next_demotion_node() returns a preferred demotion target, but it
   does not check the node against allowed nodes.

   Patch 2 ensures that next_demotion_node() filters against the allowed
   node mask and selects the closest demotion target to the source node.


This patch (of 2):

Fix two bugs in demote_folio_list() and can_demote() due to incorrect
demotion target checks against cpuset.mems_effective in reclaim/demotion.

Commit 7d709f49babc ("vmscan,cgroup: apply mems_effective to reclaim")
introduces the cpuset.mems_effective check and applies it to can_demote().
However:

  1. It does not apply this check in demote_folio_list(), which leads
     to situations where pages are demoted to nodes that are
     explicitly excluded from the task's cpuset.mems.

  2. It checks only the nodes in the immediate next demotion hierarchy
     and does not check all allowed demotion targets in can_demote().
     This can cause pages to never be demoted if the nodes in the next
     demotion hierarchy are not set in mems_effective.

These bugs break resource isolation provided by cpuset.mems.  This is
visible from userspace because pages can either fail to be demoted
entirely or are demoted to nodes that are not allowed in multi-tier memory
systems.

To address these bugs, update cpuset_node_allowed() and
mem_cgroup_node_allowed() to return effective_mems, allowing directly
logic-and operation against demotion targets.  Also update can_demote()
and demote_folio_list() accordingly.

Bug 1 reproduction:
  Assume a system with 4 nodes, where nodes 0-1 are top-tier and
  nodes 2-3 are far-tier memory. All nodes have equal capacity.

  Test script:
    echo 1 > /sys/kernel/mm/numa/demotion_enabled
    mkdir /sys/fs/cgroup/test
    echo +cpuset > /sys/fs/cgroup/cgroup.subtree_control
    echo "0-2" > /sys/fs/cgroup/test/cpuset.mems
    echo $$ > /sys/fs/cgroup/test/cgroup.procs
    swapoff -a
    # Expectation: Should respect node 0-2 limit.
    # Observation: Node 3 shows significant allocation (MemFree drops)
    stress-ng --oomable --vm 1 --vm-bytes 150% --mbind 0,1

Bug 2 reproduction:
  Assume a system with 6 nodes, where nodes 0-2 are top-tier,
  node 3 is a far-tier node, and nodes 4-5 are the farthest-tier nodes.
  All nodes have equal capacity.

  Test script:
    echo 1 > /sys/kernel/mm/numa/demotion_enabled
    mkdir /sys/fs/cgroup/test
    echo +cpuset > /sys/fs/cgroup/cgroup.subtree_control
    echo "0-2,4-5" > /sys/fs/cgroup/test/cpuset.mems
    echo $$ > /sys/fs/cgroup/test/cgroup.procs
    swapoff -a
    # Expectation: Pages are demoted to Nodes 4-5
    # Observation: No pages are demoted before oom.
    stress-ng --oomable --vm 1 --vm-bytes 150% --mbind 0,1,2

Link: https://lkml.kernel.org/r/20260114205305.2869796-1-bingjiao@google.com
Link: https://lkml.kernel.org/r/20260114205305.2869796-2-bingjiao@google.com
Fixes: 7d709f49babc ("vmscan,cgroup: apply mems_effective to reclaim")
Signed-off-by: Bing Jiao <bingjiao@google.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Gregory Price <gourry@gourry.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2026-02-12T19:32:37+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-12T19:32:37+00:00 4cff5c05e076d2ee4e34122aa956b84a2eaac587 Pull MM updates from Andrew Morton: - "powerpc/64s: do not re-activate batched TLB flush" makes arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev) It adds a generic enter/leave layer and switches architectures to use it. Various hacks were removed in the process. - "zram: introduce compressed data writeback" implements data compression for zram writeback (Richard Chang and Sergey Senozhatsky) - "mm: folio_zero_user: clear page ranges" adds clearing of contiguous page ranges for hugepages. Large improvements during demand faulting are demonstrated (David Hildenbrand) - "memcg cleanups" tidies up some memcg code (Chen Ridong) - "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos stats" improves DAMOS stat's provided information, deterministic control, and readability (SeongJae Park) - "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few issues in the hugetlb cgroup charging selftests (Li Wang) - "Fix va_high_addr_switch.sh test failure - again" addresses several issues in the va_high_addr_switch test (Chunyu Hu) - "mm/damon/tests/core-kunit: extend existing test scenarios" improves the KUnit test coverage for DAMON (Shu Anzai) - "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to transiently return -EAGAIN (Shivank Garg) - "arch, mm: consolidate hugetlb early reservation" reworks and consolidates a pile of straggly code related to reservation of hugetlb memory from bootmem and creation of CMA areas for hugetlb (Mike Rapoport) - "mm: clean up anon_vma implementation" cleans up the anon_vma implementation in various ways (Lorenzo Stoakes) - "tweaks for __alloc_pages_slowpath()" does a little streamlining of the page allocator's slowpath code (Vlastimil Babka) - "memcg: separate private and public ID namespaces" cleans up the memcg ID code and prevents the internal-only private IDs from being exposed to userspace (Shakeel Butt) - "mm: hugetlb: allocate frozen gigantic folio" cleans up the allocation of frozen folios and avoids some atomic refcount operations (Kefeng Wang) - "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement of memory betewwn the active and inactive LRUs and adds auto-tuning of the ratio-based quotas and of monitoring intervals (SeongJae Park) - "Support page table check on PowerPC" makes CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan) - "nodemask: align nodes_and{,not} with underlying bitmap ops" makes nodes_and() and nodes_andnot() propagate the return values from the underlying bit operations, enabling some cleanup in calling code (Yury Norov) - "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up some DAMON internal interfaces (SeongJae Park) - "mm/khugepaged: cleanups and scan limit fix" does some cleanup work in khupaged and fixes a scan limit accounting issue (Shivank Garg) - "mm: balloon infrastructure cleanups" goes to town on the balloon infrastructure and its page migration function. Mainly cleanups, also some locking simplification (David Hildenbrand) - "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds additional tracepoints to the page reclaim code (Jiayuan Chen) - "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is part of Marco's kernel-wide migration from the legacy workqueue APIs over to the preferred unbound workqueues (Marco Crivellari) - "Various mm kselftests improvements/fixes" provides various unrelated improvements/fixes for the mm kselftests (Kevin Brodsky) - "mm: accelerate gigantic folio allocation" greatly speeds up gigantic folio allocation, mainly by avoiding unnecessary work in pfn_range_valid_contig() (Kefeng Wang) - "selftests/damon: improve leak detection and wss estimation reliability" improves the reliability of two of the DAMON selftests (SeongJae Park) - "mm/damon: cleanup kdamond, damon_call(), damos filter and DAMON_MIN_REGION" does some cleanup work in the core DAMON code (SeongJae Park) - "Docs/mm/damon: update intro, modules, maintainer profile, and misc" performs maintenance work on the DAMON documentation (SeongJae Park) - "mm: add and use vma_assert_stabilised() helper" refactors and cleans up the core VMA code. The main aim here is to be able to use the mmap write lock's lockdep state to perform various assertions regarding the locking which the VMA code requires (Lorenzo Stoakes) - "mm, swap: swap table phase II: unify swapin use" removes some old swap code (swap cache bypassing and swap synchronization) which wasn't working very well. Various other cleanups and simplifications were made. The end result is a 20% speedup in one benchmark (Kairui Song) - "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM available on 64-bit alpha, loongarch, mips, parisc, and um. Various cleanups were performed along the way (Qi Zheng) * tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits) mm/memory: handle non-split locks correctly in zap_empty_pte_table() mm: move pte table reclaim code to memory.c mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config um: mm: enable MMU_GATHER_RCU_TABLE_FREE parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE mips: mm: enable MMU_GATHER_RCU_TABLE_FREE LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles zsmalloc: make common caches global mm: add SPDX id lines to some mm source files mm/zswap: use %pe to print error pointers mm/vmscan: use %pe to print error pointers mm/readahead: fix typo in comment mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file() mm: refactor vma_map_pages to use vm_insert_pages mm/damon: unify address range representation with damon_addr_range mm/cma: replace snprintf with strscpy in cma_new_area ... 
Pull MM updates from Andrew Morton:

 - "powerpc/64s: do not re-activate batched TLB flush" makes
   arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)

   It adds a generic enter/leave layer and switches architectures to use
   it. Various hacks were removed in the process.

 - "zram: introduce compressed data writeback" implements data
   compression for zram writeback (Richard Chang and Sergey Senozhatsky)

 - "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
   page ranges for hugepages. Large improvements during demand faulting
   are demonstrated (David Hildenbrand)

 - "memcg cleanups" tidies up some memcg code (Chen Ridong)

 - "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
   stats" improves DAMOS stat's provided information, deterministic
   control, and readability (SeongJae Park)

 - "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
   issues in the hugetlb cgroup charging selftests (Li Wang)

 - "Fix va_high_addr_switch.sh test failure - again" addresses several
   issues in the va_high_addr_switch test (Chunyu Hu)

 - "mm/damon/tests/core-kunit: extend existing test scenarios" improves
   the KUnit test coverage for DAMON (Shu Anzai)

 - "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
   glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
   transiently return -EAGAIN (Shivank Garg)

 - "arch, mm: consolidate hugetlb early reservation" reworks and
   consolidates a pile of straggly code related to reservation of
   hugetlb memory from bootmem and creation of CMA areas for hugetlb
   (Mike Rapoport)

 - "mm: clean up anon_vma implementation" cleans up the anon_vma
   implementation in various ways (Lorenzo Stoakes)

 - "tweaks for __alloc_pages_slowpath()" does a little streamlining of
   the page allocator's slowpath code (Vlastimil Babka)

 - "memcg: separate private and public ID namespaces" cleans up the
   memcg ID code and prevents the internal-only private IDs from being
   exposed to userspace (Shakeel Butt)

 - "mm: hugetlb: allocate frozen gigantic folio" cleans up the
   allocation of frozen folios and avoids some atomic refcount
   operations (Kefeng Wang)

 - "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
   of memory betewwn the active and inactive LRUs and adds auto-tuning
   of the ratio-based quotas and of monitoring intervals (SeongJae Park)

 - "Support page table check on PowerPC" makes
   CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)

 - "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
   nodes_and() and nodes_andnot() propagate the return values from the
   underlying bit operations, enabling some cleanup in calling code
   (Yury Norov)

 - "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
   some DAMON internal interfaces (SeongJae Park)

 - "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
   in khupaged and fixes a scan limit accounting issue (Shivank Garg)

 - "mm: balloon infrastructure cleanups" goes to town on the balloon
   infrastructure and its page migration function. Mainly cleanups, also
   some locking simplification (David Hildenbrand)

 - "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
   additional tracepoints to the page reclaim code (Jiayuan Chen)

 - "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
   part of Marco's kernel-wide migration from the legacy workqueue APIs
   over to the preferred unbound workqueues (Marco Crivellari)

 - "Various mm kselftests improvements/fixes" provides various unrelated
   improvements/fixes for the mm kselftests (Kevin Brodsky)

 - "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
   folio allocation, mainly by avoiding unnecessary work in
   pfn_range_valid_contig() (Kefeng Wang)

 - "selftests/damon: improve leak detection and wss estimation
   reliability" improves the reliability of two of the DAMON selftests
   (SeongJae Park)

 - "mm/damon: cleanup kdamond, damon_call(), damos filter and
   DAMON_MIN_REGION" does some cleanup work in the core DAMON code
   (SeongJae Park)

 - "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
   performs maintenance work on the DAMON documentation (SeongJae Park)

 - "mm: add and use vma_assert_stabilised() helper" refactors and cleans
   up the core VMA code. The main aim here is to be able to use the mmap
   write lock's lockdep state to perform various assertions regarding
   the locking which the VMA code requires (Lorenzo Stoakes)

 - "mm, swap: swap table phase II: unify swapin use" removes some old
   swap code (swap cache bypassing and swap synchronization) which
   wasn't working very well. Various other cleanups and simplifications
   were made. The end result is a 20% speedup in one benchmark (Kairui
   Song)

 - "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
   available on 64-bit alpha, loongarch, mips, parisc, and um. Various
   cleanups were performed along the way (Qi Zheng)

* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
  mm/memory: handle non-split locks correctly in zap_empty_pte_table()
  mm: move pte table reclaim code to memory.c
  mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
  mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
  um: mm: enable MMU_GATHER_RCU_TABLE_FREE
  parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
  mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
  LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
  alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
  mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
  mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
  zsmalloc: make common caches global
  mm: add SPDX id lines to some mm source files
  mm/zswap: use %pe to print error pointers
  mm/vmscan: use %pe to print error pointers
  mm/readahead: fix typo in comment
  mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
  mm: refactor vma_map_pages to use vm_insert_pages
  mm/damon: unify address range representation with damon_addr_range
  mm/cma: replace snprintf with strscpy in cma_new_area
  ...
Merge tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup 2026-02-11T21:20:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-11T21:20:50+00:00 ff661eeee26038f15ed9dd33c91809632e11d9eb Pull cgroup updates from Tejun Heo: - cpuset changes: - Continue separating v1 and v2 implementations by moving more v1-specific logic into cpuset-v1.c - Improve partition handling. Sibling partitions are no longer invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer fail in v2, and effective_xcpus computation is made consistent - Fix partition effective CPUs overlap that caused a warning on cpuset removal when sibling partitions shared CPUs - Increase the maximum cgroup subsystem count from 16 to 32 to accommodate future subsystem additions - Misc cleanups and selftest improvements including switching to css_is_online() helper, removing dead code and stale documentation references, using lockdep_assert_cpuset_lock_held() consistently, and adding polling helpers for asynchronously updated cgroup statistics * tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits) cpuset: fix overlap of partition effective CPUs cgroup: increase maximum subsystem count from 16 to 32 cgroup: Remove stale cpu.rt.max reference from documentation cpuset: replace direct lockdep_assert_held() with lockdep_assert_cpuset_lock_held() cgroup/cpuset: Move the v1 empty cpus/mems check to cpuset1_validate_change() cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict cgroup/cpuset: Don't fail cpuset.cpus change in v2 cgroup/cpuset: Consistently compute effective_xcpus in update_cpumasks_hier() cgroup/cpuset: Streamline rm_siblings_excl_cpus() cpuset: remove dead code in cpuset-v1.c cpuset: remove v1-specific code from generate_sched_domains cpuset: separate generate_sched_domains for v1 and v2 cpuset: move update_domain_attr_tree to cpuset_v1.c cpuset: add cpuset1_init helper for v1 initialization cpuset: add cpuset1_online_css helper for v1-specific operations cpuset: add lockdep_assert_cpuset_lock_held helper cpuset: Remove unnecessary checks in rebuild_sched_domains_locked cgroup: switch to css_is_online() helper selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants selftests: cgroup: make test_memcg_sock robust against delayed sock stats ... 
Pull cgroup updates from Tejun Heo:

 - cpuset changes:

    - Continue separating v1 and v2 implementations by moving more
      v1-specific logic into cpuset-v1.c

    - Improve partition handling. Sibling partitions are no longer
      invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
      fail in v2, and effective_xcpus computation is made consistent

    - Fix partition effective CPUs overlap that caused a warning on
      cpuset removal when sibling partitions shared CPUs

 - Increase the maximum cgroup subsystem count from 16 to 32 to
   accommodate future subsystem additions

 - Misc cleanups and selftest improvements including switching to
   css_is_online() helper, removing dead code and stale documentation
   references, using lockdep_assert_cpuset_lock_held() consistently, and
   adding polling helpers for asynchronously updated cgroup statistics

* tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
  cpuset: fix overlap of partition effective CPUs
  cgroup: increase maximum subsystem count from 16 to 32
  cgroup: Remove stale cpu.rt.max reference from documentation
  cpuset: replace direct lockdep_assert_held() with lockdep_assert_cpuset_lock_held()
  cgroup/cpuset: Move the v1 empty cpus/mems check to cpuset1_validate_change()
  cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict
  cgroup/cpuset: Don't fail cpuset.cpus change in v2
  cgroup/cpuset: Consistently compute effective_xcpus in update_cpumasks_hier()
  cgroup/cpuset: Streamline rm_siblings_excl_cpus()
  cpuset: remove dead code in cpuset-v1.c
  cpuset: remove v1-specific code from generate_sched_domains
  cpuset: separate generate_sched_domains for v1 and v2
  cpuset: move update_domain_attr_tree to cpuset_v1.c
  cpuset: add cpuset1_init helper for v1 initialization
  cpuset: add cpuset1_online_css helper for v1-specific operations
  cpuset: add lockdep_assert_cpuset_lock_held helper
  cpuset: Remove unnecessary checks in rebuild_sched_domains_locked
  cgroup: switch to css_is_online() helper
  selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants
  selftests: cgroup: make test_memcg_sock robust against delayed sock stats
  ...
Merge tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks 2026-02-10T03:57:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-10T03:57:30+00:00 d16738a4e79e55b2c3c9ff4fb7b74a4a24723515 Pull kthread updates from Frederic Weisbecker: "The kthread code provides an infrastructure which manages the preferred affinity of unbound kthreads (node or custom cpumask) against housekeeping (CPU isolation) constraints and CPU hotplug events. One crucial missing piece is the handling of cpuset: when an isolated partition is created, deleted, or its CPUs updated, all the unbound kthreads in the top cpuset become indifferently affine to _all_ the non-isolated CPUs, possibly breaking their preferred affinity along the way. Solve this with performing the kthreads affinity update from cpuset to the kthreads consolidated relevant code instead so that preferred affinities are honoured and applied against the updated cpuset isolated partitions. The dispatch of the new isolated cpumasks to timers, workqueues and kthreads is performed by housekeeping, as per the nice Tejun's suggestion. As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set from boot defined domain isolation (through isolcpus=) and cpuset isolated partitions. Housekeeping cpumasks are now modifiable with a specific RCU based synchronization. A big step toward making nohz_full= also mutable through cpuset in the future" * tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (33 commits) doc: Add housekeeping documentation kthread: Document kthread_affine_preferred() kthread: Comment on the purpose and placement of kthread_affine_node() call kthread: Honour kthreads preferred affinity after cpuset changes sched/arm64: Move fallback task cpumask to HK_TYPE_DOMAIN sched: Switch the fallback task allowed cpumask to HK_TYPE_DOMAIN kthread: Rely on HK_TYPE_DOMAIN for preferred affinity management kthread: Include kthreadd to the managed affinity list kthread: Include unbound kthreads in the managed affinity list kthread: Refine naming of affinity related fields PCI: Remove superfluous HK_TYPE_WQ check sched/isolation: Remove HK_TYPE_TICK test from cpu_is_isolated() cpuset: Remove cpuset_cpu_is_isolated() timers/migration: Remove superfluous cpuset isolation test cpuset: Propagate cpuset isolation update to timers through housekeeping cpuset: Propagate cpuset isolation update to workqueue through housekeeping PCI: Flush PCI probe workqueue on cpuset isolated partition change sched/isolation: Flush vmstat workqueues on cpuset isolated partition change sched/isolation: Flush memcg workqueues on cpuset isolated partition change cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset ... 
Pull kthread updates from Frederic Weisbecker:
 "The kthread code provides an infrastructure which manages the
  preferred affinity of unbound kthreads (node or custom cpumask)
  against housekeeping (CPU isolation) constraints and CPU hotplug
  events.

  One crucial missing piece is the handling of cpuset: when an isolated
  partition is created, deleted, or its CPUs updated, all the unbound
  kthreads in the top cpuset become indifferently affine to _all_ the
  non-isolated CPUs, possibly breaking their preferred affinity along
  the way.

  Solve this with performing the kthreads affinity update from cpuset to
  the kthreads consolidated relevant code instead so that preferred
  affinities are honoured and applied against the updated cpuset
  isolated partitions.

  The dispatch of the new isolated cpumasks to timers, workqueues and
  kthreads is performed by housekeeping, as per the nice Tejun's
  suggestion.

  As a welcome side effect, HK_TYPE_DOMAIN then integrates both the set
  from boot defined domain isolation (through isolcpus=) and cpuset
  isolated partitions. Housekeeping cpumasks are now modifiable with a
  specific RCU based synchronization. A big step toward making
  nohz_full= also mutable through cpuset in the future"

* tag 'kthread-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (33 commits)
  doc: Add housekeeping documentation
  kthread: Document kthread_affine_preferred()
  kthread: Comment on the purpose and placement of kthread_affine_node() call
  kthread: Honour kthreads preferred affinity after cpuset changes
  sched/arm64: Move fallback task cpumask to HK_TYPE_DOMAIN
  sched: Switch the fallback task allowed cpumask to HK_TYPE_DOMAIN
  kthread: Rely on HK_TYPE_DOMAIN for preferred affinity management
  kthread: Include kthreadd to the managed affinity list
  kthread: Include unbound kthreads in the managed affinity list
  kthread: Refine naming of affinity related fields
  PCI: Remove superfluous HK_TYPE_WQ check
  sched/isolation: Remove HK_TYPE_TICK test from cpu_is_isolated()
  cpuset: Remove cpuset_cpu_is_isolated()
  timers/migration: Remove superfluous cpuset isolation test
  cpuset: Propagate cpuset isolation update to timers through housekeeping
  cpuset: Propagate cpuset isolation update to workqueue through housekeeping
  PCI: Flush PCI probe workqueue on cpuset isolated partition change
  sched/isolation: Flush vmstat workqueues on cpuset isolated partition change
  sched/isolation: Flush memcg workqueues on cpuset isolated partition change
  cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset
  ...
kthread: Honour kthreads preferred affinity after cpuset changes 2026-02-03T14:23:35+00:00 Frederic Weisbecker frederic@kernel.org 2025-06-04T12:02:40+00:00 e894f633980804a528a2d6996c4ea651df631632 When cpuset isolated partitions get updated, unbound kthreads get indifferently affine to all non isolated CPUs, regardless of their individual affinity preferences. For example kswapd is a per-node kthread that prefers to be affine to the node it refers to. Whenever an isolated partition is created, updated or deleted, kswapd's node affinity is going to be broken if any CPU in the related node is not isolated because kswapd will be affine globally. Fix this with letting the consolidated kthread managed affinity code do the affinity update on behalf of cpuset. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Waiman Long <longman@redhat.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Marco Crivellari <marco.crivellari@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Waiman Long <longman@redhat.com> Cc: cgroups@vger.kernel.org 
When cpuset isolated partitions get updated, unbound kthreads get
indifferently affine to all non isolated CPUs, regardless of their
individual affinity preferences.

For example kswapd is a per-node kthread that prefers to be affine to
the node it refers to. Whenever an isolated partition is created,
updated or deleted, kswapd's node affinity is going to be broken if any
CPU in the related node is not isolated because kswapd will be affine
globally.

Fix this with letting the consolidated kthread managed affinity code do
the affinity update on behalf of cpuset.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
cpuset: Remove cpuset_cpu_is_isolated() 2026-02-03T14:23:34+00:00 Frederic Weisbecker frederic@kernel.org 2025-05-28T16:21:32+00:00 6440966067dc078f7b46942b3e2cb5d1035fc0b9 The set of cpuset isolated CPUs is now included in HK_TYPE_DOMAIN housekeeping cpumask. There is no usecase left interested in just checking what is isolated by cpuset and not by the isolcpus= kernel boot parameter. Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Reviewed-by: Waiman Long <longman@redhat.com> Cc: "Michal Koutný" <mkoutny@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Marco Crivellari <marco.crivellari@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Waiman Long <longman@redhat.com> Cc: cgroups@vger.kernel.org 
The set of cpuset isolated CPUs is now included in HK_TYPE_DOMAIN
housekeeping cpumask. There is no usecase left interested in just
checking what is isolated by cpuset and not by the isolcpus= kernel
boot parameter.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org