Tasks can block on hotplug.lock in pin_current_cpu(), but their state
might be != RUNNING. So the mutex wakeup will set the state
unconditionally to RUNNING. That might cause spurious unexpected
wakeups. We could provide a state preserving mutex_lock() function,
but this is semantically backwards. So instead we convert the
hotplug.lock() to a spinlock for RT, which has the state preserving
semantics already.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Clark Williams <clark.williams@gmail.com>
Cc: stable-rt@vger.kernel.org
Link: http://lkml.kernel.org/r/1330702617.25686.265.camel@gandalf.stny.rr.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

cpu_unplug_begin() should be called before CPU_DOWN_PREPARE, because
at CPU_DOWN_PREPARE cpu_active is cleared and sched_domain is
rebuilt. Otherwise the 'sync_unplug' thread will be running on the cpu
on which it's created and not bound on the cpu which is about to go
down.

I found that by an incorrect warning on smp_processor_id() called by
sync_unplug/1, and trace shows below:
(echo 1 > /sys/device/system/cpu/cpu1/online)
  bash-1664  [000]    83.136620: _cpu_down: Bind sync_unplug to cpu 1
  bash-1664  [000]    83.136623: sched_wait_task: comm=sync_unplug/1 pid=1724 prio=120
  bash-1664  [000]    83.136624: _cpu_down: Wake sync_unplug
  bash-1664  [000]    83.136629: sched_wakeup: comm=sync_unplug/1 pid=1724 prio=120 success=1 target_cpu=000

Wants to be folded back....

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Link: http://lkml.kernel.org/r/1318762607-2261-3-git-send-email-yong.zhang0@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

When retry happens, it's likely that the task has been migrated to
another cpu (except unplug failed), but it still derefernces the
original hotplug_pcp per cpu data.

Update the pointer to hotplug_pcp in the retry path, so it points to
the current cpu.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20110728031600.GA338@windriver.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Otherwise the output will look a little odd.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Link: http://lkml.kernel.org/r/1318762607-2261-2-git-send-email-yong.zhang0@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

get_online_cpus() is a heavy weight function which involves a global
mutex. migrate_disable() wants a simpler construct which prevents only
a CPU from going doing while a task is in a migrate disabled section.

Implement a per cpu lockless mechanism, which serializes only in the
real unplug case on a global mutex. That serialization affects only
tasks on the cpu which should be brought down.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
  PM / Hibernate: Implement compat_ioctl for /dev/snapshot
  PM / Freezer: fix return value of freezable_schedule_timeout_killable()
  PM / shmobile: Allow the A4R domain to be turned off at run time
  PM / input / touchscreen: Make st1232 use device PM QoS constraints
  PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
  PM / shmobile: Remove the stay_on flag from SH7372's PM domains
  PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
  PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  ARM: S3C64XX: Implement basic power domain support
  PM / shmobile: Use common always on power domain governor
  ...

Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  sched/tracing: Add a new tracepoint for sleeptime
  sched: Disable scheduler warnings during oopses
  sched: Fix cgroup movement of waking process
  sched: Fix cgroup movement of newly created process
  sched: Fix cgroup movement of forking process
  sched: Remove cfs bandwidth period check in tg_set_cfs_period()
  sched: Fix load-balance lock-breaking
  sched: Replace all_pinned with a generic flags field
  sched: Only queue remote wakeups when crossing cache boundaries
  sched: Add missing rcu_dereference() around ->real_parent usage
  [S390] fix cputime overflow in uptime_proc_show
  [S390] cputime: add sparse checking and cleanup
  sched: Mark parent and real_parent as __rcu
  sched, nohz: Fix missing RCU read lock
  sched, nohz: Set the NOHZ_BALANCE_KICK flag for idle load balancer
  sched, nohz: Fix the idle cpu check in nohz_idle_balance
  sched: Use jump_labels for sched_feat
  sched/accounting: Fix parameter passing in task_group_account_field
  sched/accounting: Fix user/system tick double accounting
  sched/accounting: Re-use scheduler statistics for the root cgroup
  ...

Fix up conflicts in
 - arch/ia64/include/asm/cputime.h, include/asm-generic/cputime.h
	usecs_to_cputime64() vs the sparse cleanups
 - kernel/sched/fair.c, kernel/time/tick-sched.c
	scheduler changes in multiple branches

Make cputime_t and cputime64_t nocast to enable sparse checking to
detect incorrect use of cputime. Drop the cputime macros for simple
scalar operations. The conversion macros are still needed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Building rcutorture as a module requires cpu_up() as well as cpu_down()
exported, so apply EXPORT_SYMBOL_GPL().

Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>