- Rename from kdb_send_sig_info to kdb_send_sig
  As there is no meaningful siginfo sent

- Use SEND_SIG_PRIV instead of generating a siginfo for a kdb
  signal.  The generated siginfo had a bogus rationale and was
  not correct in the face of pid namespaces.  SEND_SIG_PRIV
  is simpler and actually correct.

- As the code grabs siglock just send the signal with siglock
  held instead of dropping siglock and attempting to grab it again.

- Move the sig_valid test into kdb_kill where it can generate
  a good error message.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>

kdb_printf_lock does not prevent other CPUs from entering the critical
section because it is ignored when KDB_STATE_PRINTF_LOCK is set.

The problematic situation might look like:

CPU0					CPU1

vkdb_printf()
  if (!KDB_STATE(PRINTF_LOCK))
    KDB_STATE_SET(PRINTF_LOCK);
    spin_lock_irqsave(&kdb_printf_lock, flags);

					vkdb_printf()
					  if (!KDB_STATE(PRINTF_LOCK))

BANG: The PRINTF_LOCK state is set and CPU1 is entering the critical
section without spinning on the lock.

The problem is that the code tries to implement locking using two state
variables that are not handled atomically.  Well, we need a custom
locking because we want to allow reentering the critical section on the
very same CPU.

Let's use solution from Petr Zijlstra that was proposed for a similar
scenario, see
https://lkml.kernel.org/r/20161018171513.734367391@infradead.org

This patch uses the same trick with cmpxchg().  The only difference is
that we want to handle only recursion from the same context and
therefore we disable interrupts.

In addition, KDB_STATE_PRINTF_LOCK is removed.  In fact, we are not able
to set it a non-racy way.

Link: http://lkml.kernel.org/r/1480412276-16690-3-git-send-email-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All current callers of kdb_getstr() can pass constant pointers via the
prompt argument. This patch adds a const qualification to make explicit
the fact that this is safe.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

Currently kdb allows the output of comamnds to be filtered using the
| grep feature. This is useful but does not permit the output emitted
shortly after a string match to be examined without wading through the
entire unfiltered output of the command. Such a feature is particularly
useful to navigate function traces because these traces often have a
useful trigger string *before* the point of interest.

This patch reuses the existing filtering logic to introduce a simple
forward search to kdb that can be triggered from the more prompt.

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

We're about to add more options for command behaviour, so let's expand
the meaning of kdb_repeat_t.

So far we just do various renames, there should be no functional changes.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

The struct member is never used in the code, so we can remove it.

We will introduce real flags soon by renaming cmd_repeat to cmd_flags.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

The 'ssb' command can only be handled when we have a disassembler, to check for
branches, so remove the 'ssb' command for now.

Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

The function is no longer needed, so remove it.

Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes the following problems:
1) Typematic-repeat of 'enter' gives warning message
   and leaks make/break if KDB exits. Repeats
   look something like 0x1c 0x1c .... 0x9c
2) Use of 'keypad enter' gives warning message and
   leaks the ENTER break/make code out if KDB exits.
   KP ENTER repeats look someting like 0xe0 0x1c
   0xe0 0x1c ... 0xe0 0x9c.
3) Lag on the order of seconds between "break" and "make" when
   expecting the enter "break" code. Seen under virtualized
   environments such as VMware ESX.

The existing special enter handler tries to glob the enter break code,
but this fails if the other (KP) enter was used, or if there was a key
repeat. It also fails if you mashed some keys along with enter, and
you ended up with a non-enter make or non-enter break code coming
after the enter make code. So first, we modify the handler to handle
these cases. But performing these actions on every enter is annoying
since now you can't hold ENTER down to scroll <more>d messages in
KDB. Since this special behaviour is only necessary to handle the
exiting KDB ('g' + ENTER) without leaking scancodes to the OS.  This
cleanup needs to get executed anytime the kdb_main loop exits.

Tested on QEMU. Set a bp on atkbd.c to verify no scan code was leaked.

Cc: Andrei Warkentin <andreiw@vmware.com>
[jason.wessel@windriver.com: move cleanup calls to kdb_main.c]
Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

The DOING_KGDB2 was originally a state variable for one of the two
ways to automatically transition from kdb to kgdb.  Purge all these
variables and just use one single state for the transition.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>