linux-toradex.git/kernel/events, branch v6.17-rc3 Linux kernel for Apalis and Colibri modules perf: Avoid undefined behavior from stopping/starting inactive events 2025-08-15T11:12:56+00:00 Yunseong Kim ysk@kzalloc.com 2025-08-12T18:10:47+00:00 b64fdd422a85025b5e91ead794db9d3ef970e369 Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can leave event->hw.idx at -1. When PMU drivers later attempt to use this negative index as a shift exponent in bitwise operations, it leads to UBSAN shift-out-of-bounds reports. The issue is a logical flaw in how event groups handle throttling when some members are intentionally disabled. Based on the analysis and the reproducer provided by Mark Rutland (this issue on both arm64 and x86-64). The scenario unfolds as follows: 1. A group leader event is configured with a very aggressive sampling period (e.g., sample_period = 1). This causes frequent interrupts and triggers the throttling mechanism. 2. A child event in the same group is created in a disabled state (.disabled = 1). This event remains in PERF_EVENT_STATE_OFF. Since it hasn't been scheduled onto the PMU, its event->hw.idx remains initialized at -1. 3. When throttling occurs, perf_event_throttle_group() and later perf_event_unthrottle_group() iterate through all siblings, including the disabled child event. 4. perf_event_throttle()/unthrottle() are called on this inactive child event, which then call event->pmu->start()/stop(). 5. The PMU driver receives the event with hw.idx == -1 and attempts to use it as a shift exponent. e.g., in macros like PMCNTENSET(idx), leading to the UBSAN report. The throttling mechanism attempts to start/stop events that are not actively scheduled on the hardware. Move the state check into perf_event_throttle()/perf_event_unthrottle() so that inactive events are skipped entirely. This ensures only active events with a valid hw.idx are processed, preventing undefined behavior and silencing UBSAN warnings. The corrected check ensures true before proceeding with PMU operations. The problem can be reproduced with the syzkaller reproducer: Fixes: 9734e25fbf5a ("perf: Fix the throttle logic for a group") Signed-off-by: Yunseong Kim <ysk@kzalloc.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20250812181046.292382-2-ysk@kzalloc.com 
Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can
leave event->hw.idx at -1. When PMU drivers later attempt to use this
negative index as a shift exponent in bitwise operations, it leads to UBSAN
shift-out-of-bounds reports.

The issue is a logical flaw in how event groups handle throttling when some
members are intentionally disabled. Based on the analysis and the
reproducer provided by Mark Rutland (this issue on both arm64 and x86-64).

The scenario unfolds as follows:

 1. A group leader event is configured with a very aggressive sampling
    period (e.g., sample_period = 1). This causes frequent interrupts and
    triggers the throttling mechanism.
 2. A child event in the same group is created in a disabled state
    (.disabled = 1). This event remains in PERF_EVENT_STATE_OFF.
    Since it hasn't been scheduled onto the PMU, its event->hw.idx remains
    initialized at -1.
 3. When throttling occurs, perf_event_throttle_group() and later
    perf_event_unthrottle_group() iterate through all siblings, including
    the disabled child event.
 4. perf_event_throttle()/unthrottle() are called on this inactive child
    event, which then call event->pmu->start()/stop().
 5. The PMU driver receives the event with hw.idx == -1 and attempts to
    use it as a shift exponent. e.g., in macros like PMCNTENSET(idx),
    leading to the UBSAN report.

The throttling mechanism attempts to start/stop events that are not
actively scheduled on the hardware.

Move the state check into perf_event_throttle()/perf_event_unthrottle() so
that inactive events are skipped entirely. This ensures only active events
with a valid hw.idx are processed, preventing undefined behavior and
silencing UBSAN warnings. The corrected check ensures true before
proceeding with PMU operations.

The problem can be reproduced with the syzkaller reproducer:

Fixes: 9734e25fbf5a ("perf: Fix the throttle logic for a group")
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250812181046.292382-2-ysk@kzalloc.com
perf/core: Prevent VMA split of buffer mappings 2025-08-05T19:55:29+00:00 Thomas Gleixner tglx@linutronix.de 2025-07-30T21:01:21+00:00 b024d7b56c77191cde544f838debb7f8451cd0d6 The perf mmap code is careful about mmap()'ing the user page with the ringbuffer and additionally the auxiliary buffer, when the event supports it. Once the first mapping is established, subsequent mapping have to use the same offset and the same size in both cases. The reference counting for the ringbuffer and the auxiliary buffer depends on this being correct. Though perf does not prevent that a related mapping is split via mmap(2), munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls, which take reference counts, but then the subsequent perf_mmap_close() calls are not longer fulfilling the offset and size checks. This leads to reference count leaks. As perf already has the requirement for subsequent mappings to match the initial mapping, the obvious consequence is that VMA splits, caused by resizing of a mapping or partial unmapping, have to be prevented. Implement the vm_operations_struct::may_split() callback and return unconditionally -EINVAL. That ensures that the mapping offsets and sizes cannot be changed after the fact. Remapping to a different fixed address with the same size is still possible as it takes the references for the new mapping and drops those of the old mapping. Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: stable@vger.kernel.org 
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.

Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.

As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.

Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.

That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.

Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: stable@vger.kernel.org
perf/core: Handle buffer mapping fail correctly in perf_mmap() 2025-08-05T19:55:29+00:00 Thomas Gleixner tglx@linutronix.de 2025-08-02T10:48:55+00:00 f74b9f4ba63ffdf597aaaa6cad7e284cb8e04820 After successful allocation of a buffer or a successful attachment to an existing buffer perf_mmap() tries to map the buffer read only into the page table. If that fails, the already set up page table entries are zapped, but the other perf specific side effects of that failure are not handled. The calling code just cleans up the VMA and does not invoke perf_mmap_close(). This leaks reference counts, corrupts user->vm accounting and also results in an unbalanced invocation of event::event_mapped(). Cure this by moving the event::event_mapped() invocation before the map_range() call so that on map_range() failure perf_mmap_close() can be invoked without causing an unbalanced event::event_unmapped() call. perf_mmap_close() undoes the reference counts and eventually frees buffers. Fixes: b709eb872e19 ("perf: map pages in advance") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org 
After successful allocation of a buffer or a successful attachment to an
existing buffer perf_mmap() tries to map the buffer read only into the page
table. If that fails, the already set up page table entries are zapped, but
the other perf specific side effects of that failure are not handled.  The
calling code just cleans up the VMA and does not invoke perf_mmap_close().

This leaks reference counts, corrupts user->vm accounting and also results
in an unbalanced invocation of event::event_mapped().

Cure this by moving the event::event_mapped() invocation before the
map_range() call so that on map_range() failure perf_mmap_close() can be
invoked without causing an unbalanced event::event_unmapped() call.

perf_mmap_close() undoes the reference counts and eventually frees buffers.

Fixes: b709eb872e19 ("perf: map pages in advance")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
perf/core: Exit early on perf_mmap() fail 2025-08-05T19:55:29+00:00 Thomas Gleixner tglx@linutronix.de 2025-08-02T10:49:48+00:00 07091aade394f690e7b655578140ef84d0e8d7b0 When perf_mmap() fails to allocate a buffer, it still invokes the event_mapped() callback of the related event. On X86 this might increase the perf_rdpmc_allowed reference counter. But nothing undoes this as perf_mmap_close() is never called in this case, which causes another reference count leak. Return early on failure to prevent that. Fixes: 1e0fb9ec679c ("perf: Add pmu callbacks to track event mapping and unmapping") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org 
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.

Return early on failure to prevent that.

Fixes: 1e0fb9ec679c ("perf: Add pmu callbacks to track event mapping and unmapping")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
perf/core: Don't leak AUX buffer refcount on allocation failure 2025-08-05T19:55:29+00:00 Thomas Gleixner tglx@linutronix.de 2025-08-02T10:39:39+00:00 5468c0fbccbb9d156522c50832244a8b722374fb Failure of the AUX buffer allocation leaks the reference count. Set the reference count to 1 only when the allocation succeeds. Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org 
Failure of the AUX buffer allocation leaks the reference count.

Set the reference count to 1 only when the allocation succeeds.

Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
perf/core: Preserve AUX buffer allocation failure result 2025-08-05T19:55:28+00:00 Thomas Gleixner tglx@linutronix.de 2025-08-04T20:22:09+00:00 54473e0ef849f44e5ee43e6d6746c27030c3825b A recent overhaul sets the return value to 0 unconditionally after the allocations, which causes reference count leaks and corrupts the user->vm accounting. Preserve the AUX buffer allocation failure return value, so that the subsequent code works correctly. Fixes: 0983593f32c4 ("perf/core: Lift event->mmap_mutex in perf_mmap()") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org 
A recent overhaul sets the return value to 0 unconditionally after the
allocations, which causes reference count leaks and corrupts the user->vm
accounting.

Preserve the AUX buffer allocation failure return value, so that the
subsequent code works correctly.

Fixes: 0983593f32c4 ("perf/core: Lift event->mmap_mutex in perf_mmap()")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: stable@vger.kernel.org
Merge tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2025-08-03T23:23:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-08-03T23:23:09+00:00 e991acf1bce7a428794514cbbe216973c9c0a3c8 Pull non-MM updates from Andrew Morton: "Significant patch series in this pull request: - "squashfs: Remove page->mapping references" (Matthew Wilcox) gets us closer to being able to remove page->mapping - "relayfs: misc changes" (Jason Xing) does some maintenance and minor feature addition work in relayfs - "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches us from static preallocation of the kdump crashkernel's working memory over to dynamic allocation. So the difficulty of a-priori estimation of the second kernel's needs is removed and the first kernel obtains extra memory - "generalize panic_print's dump function to be used by other kernel parts" (Feng Tang) implements some consolidation and rationalization of the various ways in which a failing kernel splats information at the operator * tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits) tools/getdelays: add backward compatibility for taskstats version kho: add test for kexec handover delaytop: enhance error logging and add PSI feature description samples: Kconfig: fix spelling mistake "instancess" -> "instances" fat: fix too many log in fat_chain_add() scripts/spelling.txt: add notifer||notifier to spelling.txt xen/xenbus: fix typo "notifer" net: mvneta: fix typo "notifer" drm/xe: fix typo "notifer" cxl: mce: fix typo "notifer" KVM: x86: fix typo "notifer" MAINTAINERS: add maintainers for delaytop ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below() ucount: fix atomic_long_inc_below() argument type kexec: enable CMA based contiguous allocation stackdepot: make max number of pools boot-time configurable lib/xxhash: remove unused functions init/Kconfig: restore CONFIG_BROKEN help text lib/raid6: update recov_rvv.c zero page usage docs: update docs after introducing delaytop ... 
Pull non-MM updates from Andrew Morton:
 "Significant patch series in this pull request:

   - "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
     us closer to being able to remove page->mapping

   - "relayfs: misc changes" (Jason Xing) does some maintenance and
     minor feature addition work in relayfs

   - "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
     us from static preallocation of the kdump crashkernel's working
     memory over to dynamic allocation. So the difficulty of a-priori
     estimation of the second kernel's needs is removed and the first
     kernel obtains extra memory

   - "generalize panic_print's dump function to be used by other
     kernel parts" (Feng Tang) implements some consolidation and
     rationalization of the various ways in which a failing kernel
     splats information at the operator

* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
  tools/getdelays: add backward compatibility for taskstats version
  kho: add test for kexec handover
  delaytop: enhance error logging and add PSI feature description
  samples: Kconfig: fix spelling mistake "instancess" -> "instances"
  fat: fix too many log in fat_chain_add()
  scripts/spelling.txt: add notifer||notifier to spelling.txt
  xen/xenbus: fix typo "notifer"
  net: mvneta: fix typo "notifer"
  drm/xe: fix typo "notifer"
  cxl: mce: fix typo "notifer"
  KVM: x86: fix typo "notifer"
  MAINTAINERS: add maintainers for delaytop
  ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
  ucount: fix atomic_long_inc_below() argument type
  kexec: enable CMA based contiguous allocation
  stackdepot: make max number of pools boot-time configurable
  lib/xxhash: remove unused functions
  init/Kconfig: restore CONFIG_BROKEN help text
  lib/raid6: update recov_rvv.c zero page usage
  docs: update docs after introducing delaytop
  ...
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2025-07-31T21:57:54+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-31T21:57:54+00:00 beace86e61e465dba204a268ab3f3377153a4973 Pull MM updates from Andrew Morton: "As usual, many cleanups. The below blurbiage describes 42 patchsets. 21 of those are partially or fully cleanup work. "cleans up", "cleanup", "maintainability", "rationalizes", etc. I never knew the MM code was so dirty. "mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes) addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for merging with existing adjacent VMAs. "mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park) adds a new kernel module which simplifies the setup and usage of DAMON in production environments. "stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig) is a cleanup to the writeback code which removes a couple of pointers from struct writeback_control. "drivers/base/node.c: optimization and cleanups" (Donet Tom) contains largely uncorrelated cleanups to the NUMA node setup and management code. "mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman) does some maintenance work on the userfaultfd code. "Readahead tweaks for larger folios" (Ryan Roberts) implements some tuneups for pagecache readahead when it is reading into order>0 folios. "selftests/mm: Tweaks to the cow test" (Mark Brown) provides some cleanups and consistency improvements to the selftests code. "Optimize mremap() for large folios" (Dev Jain) does that. A 37% reduction in execution time was measured in a memset+mremap+munmap microbenchmark. "Remove zero_user()" (Matthew Wilcox) expunges zero_user() in favor of the more modern memzero_page(). "mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand) addresses some warts which David noticed in the huge page code. These were not known to be causing any issues at this time. "mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park) provides some cleanup and consolidation work in DAMON. "use vm_flags_t consistently" (Lorenzo Stoakes) uses vm_flags_t in places where we were inappropriately using other types. "mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy) increases the reliability of large page allocation in the memfd code. "mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple) removes several now-unneeded PFN_* flags. "mm/damon: decouple sysfs from core" (SeongJae Park) implememnts some cleanup and maintainability work in the DAMON sysfs layer. "madvise cleanup" (Lorenzo Stoakes) does quite a lot of cleanup/maintenance work in the madvise() code. "madvise anon_name cleanups" (Vlastimil Babka) provides additional cleanups on top or Lorenzo's effort. "Implement numa node notifier" (Oscar Salvador) creates a standalone notifier for NUMA node memory state changes. Previously these were lumped under the more general memory on/offline notifier. "Make MIGRATE_ISOLATE a standalone bit" (Zi Yan) cleans up the pageblock isolation code and fixes a potential issue which doesn't seem to cause any problems in practice. "selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park) adds additional drgn- and python-based DAMON selftests which are more comprehensive than the existing selftest suite. "Misc rework on hugetlb faulting path" (Oscar Salvador) fixes a rather obscure deadlock in the hugetlb fault code and follows that fix with a series of cleanups. "cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport) rationalizes and cleans up the highmem-specific code in the CMA allocator. "mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand) provides cleanups and future-preparedness to the migration code. "mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park) adds some tracepoints to some DAMON auto-tuning code. "mm/damon: fix misc bugs in DAMON modules" (SeongJae Park) does that. "mm/damon: misc cleanups" (SeongJae Park) also does what it claims. "mm: folio_pte_batch() improvements" (David Hildenbrand) cleans up the large folio PTE batching code. "mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park) facilitates dynamic alteration of DAMON's inter-node allocation policy. "Remove unmap_and_put_page()" (Vishal Moola) provides a couple of page->folio conversions. "mm: per-node proactive reclaim" (Davidlohr Bueso) implements a per-node control of proactive reclaim - beyond the current memcg-based implementation. "mm/damon: remove damon_callback" (SeongJae Park) replaces the damon_callback interface with a more general and powerful damon_call()+damos_walk() interface. "mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes) implements a number of mremap cleanups (of course) in preparation for adding new mremap() functionality: newly permit the remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It still excludes some specialized situations where this cannot be performed reliably. "drop hugetlb_free_pgd_range()" (Anthony Yznaga) switches some sparc hugetlb code over to the generic version and removes the thus-unneeded hugetlb_free_pgd_range(). "mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park) augments the present userspace-requested update of DAMON sysfs monitoring files. Automatic update is now provided, along with a tunable to control the update interval. "Some randome fixes and cleanups to swapfile" (Kemeng Shi) does what is claims. "mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand) provides (and uses) a means by which debug-style functions can grab a copy of a pageframe and inspect it locklessly without tripping over the races inherent in operating on the live pageframe directly. "use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan) addresses the large contention issues which can be triggered by reads from that procfs file. Latencies are reduced by more than half in some situations. The series also introduces several new selftests for the /proc/pid/maps interface. "__folio_split() clean up" (Zi Yan) cleans up __folio_split()! "Optimize mprotect() for large folios" (Dev Jain) provides some quite large (>3x) speedups to mprotect() when dealing with large folios. "selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian) does some cleanup work in the selftests code. "tools/testing: expand mremap testing" (Lorenzo Stoakes) extends the mremap() selftest in several ways, including adding more checking of Lorenzo's recently added "permit mremap() move of multiple VMAs" feature. "selftests/damon/sysfs.py: test all parameters" (SeongJae Park) extends the DAMON sysfs interface selftest so that it tests all possible user-requested parameters. Rather than the present minimal subset" * tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits) MAINTAINERS: add missing headers to mempory policy & migration section MAINTAINERS: add missing file to cgroup section MAINTAINERS: add MM MISC section, add missing files to MISC and CORE MAINTAINERS: add missing zsmalloc file MAINTAINERS: add missing files to page alloc section MAINTAINERS: add missing shrinker files MAINTAINERS: move memremap.[ch] to hotplug section MAINTAINERS: add missing mm_slot.h file THP section MAINTAINERS: add missing interval_tree.c to memory mapping section MAINTAINERS: add missing percpu-internal.h file to per-cpu section mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info() selftests/damon: introduce _common.sh to host shared function selftests/damon/sysfs.py: test runtime reduction of DAMON parameters selftests/damon/sysfs.py: test non-default parameters runtime commit selftests/damon/sysfs.py: generalize DAMON context commit assertion selftests/damon/sysfs.py: generalize monitoring attributes commit assertion selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion selftests/damon/sysfs.py: test DAMOS filters commitment selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion selftests/damon/sysfs.py: test DAMOS destinations commitment ... 
Pull MM updates from Andrew Morton:
 "As usual, many cleanups. The below blurbiage describes 42 patchsets.
  21 of those are partially or fully cleanup work. "cleans up",
  "cleanup", "maintainability", "rationalizes", etc.

  I never knew the MM code was so dirty.

  "mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
     addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
     mapped VMAs were not eligible for merging with existing adjacent
     VMAs.

  "mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
     adds a new kernel module which simplifies the setup and usage of
     DAMON in production environments.

  "stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
     is a cleanup to the writeback code which removes a couple of
     pointers from struct writeback_control.

  "drivers/base/node.c: optimization and cleanups" (Donet Tom)
     contains largely uncorrelated cleanups to the NUMA node setup and
     management code.

  "mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
     does some maintenance work on the userfaultfd code.

  "Readahead tweaks for larger folios" (Ryan Roberts)
     implements some tuneups for pagecache readahead when it is reading
     into order>0 folios.

  "selftests/mm: Tweaks to the cow test" (Mark Brown)
     provides some cleanups and consistency improvements to the
     selftests code.

  "Optimize mremap() for large folios" (Dev Jain)
     does that. A 37% reduction in execution time was measured in a
     memset+mremap+munmap microbenchmark.

  "Remove zero_user()" (Matthew Wilcox)
     expunges zero_user() in favor of the more modern memzero_page().

  "mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
     addresses some warts which David noticed in the huge page code.
     These were not known to be causing any issues at this time.

  "mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
     provides some cleanup and consolidation work in DAMON.

  "use vm_flags_t consistently" (Lorenzo Stoakes)
     uses vm_flags_t in places where we were inappropriately using other
     types.

  "mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
     increases the reliability of large page allocation in the memfd
     code.

  "mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
     removes several now-unneeded PFN_* flags.

  "mm/damon: decouple sysfs from core" (SeongJae Park)
     implememnts some cleanup and maintainability work in the DAMON
     sysfs layer.

  "madvise cleanup" (Lorenzo Stoakes)
     does quite a lot of cleanup/maintenance work in the madvise() code.

  "madvise anon_name cleanups" (Vlastimil Babka)
     provides additional cleanups on top or Lorenzo's effort.

  "Implement numa node notifier" (Oscar Salvador)
     creates a standalone notifier for NUMA node memory state changes.
     Previously these were lumped under the more general memory
     on/offline notifier.

  "Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
     cleans up the pageblock isolation code and fixes a potential issue
     which doesn't seem to cause any problems in practice.

  "selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
     adds additional drgn- and python-based DAMON selftests which are
     more comprehensive than the existing selftest suite.

  "Misc rework on hugetlb faulting path" (Oscar Salvador)
     fixes a rather obscure deadlock in the hugetlb fault code and
     follows that fix with a series of cleanups.

  "cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
     rationalizes and cleans up the highmem-specific code in the CMA
     allocator.

  "mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
     provides cleanups and future-preparedness to the migration code.

  "mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
     adds some tracepoints to some DAMON auto-tuning code.

  "mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
     does that.

  "mm/damon: misc cleanups" (SeongJae Park)
     also does what it claims.

  "mm: folio_pte_batch() improvements" (David Hildenbrand)
     cleans up the large folio PTE batching code.

  "mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
     facilitates dynamic alteration of DAMON's inter-node allocation
     policy.

  "Remove unmap_and_put_page()" (Vishal Moola)
     provides a couple of page->folio conversions.

  "mm: per-node proactive reclaim" (Davidlohr Bueso)
     implements a per-node control of proactive reclaim - beyond the
     current memcg-based implementation.

  "mm/damon: remove damon_callback" (SeongJae Park)
     replaces the damon_callback interface with a more general and
     powerful damon_call()+damos_walk() interface.

  "mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
     implements a number of mremap cleanups (of course) in preparation
     for adding new mremap() functionality: newly permit the remapping
     of multiple VMAs when the user is specifying MREMAP_FIXED. It still
     excludes some specialized situations where this cannot be performed
     reliably.

  "drop hugetlb_free_pgd_range()" (Anthony Yznaga)
     switches some sparc hugetlb code over to the generic version and
     removes the thus-unneeded hugetlb_free_pgd_range().

  "mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
     augments the present userspace-requested update of DAMON sysfs
     monitoring files. Automatic update is now provided, along with a
     tunable to control the update interval.

  "Some randome fixes and cleanups to swapfile" (Kemeng Shi)
     does what is claims.

  "mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
     provides (and uses) a means by which debug-style functions can grab
     a copy of a pageframe and inspect it locklessly without tripping
     over the races inherent in operating on the live pageframe
     directly.

  "use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
     addresses the large contention issues which can be triggered by
     reads from that procfs file. Latencies are reduced by more than
     half in some situations. The series also introduces several new
     selftests for the /proc/pid/maps interface.

  "__folio_split() clean up" (Zi Yan)
     cleans up __folio_split()!

  "Optimize mprotect() for large folios" (Dev Jain)
     provides some quite large (>3x) speedups to mprotect() when dealing
     with large folios.

  "selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
     does some cleanup work in the selftests code.

  "tools/testing: expand mremap testing" (Lorenzo Stoakes)
     extends the mremap() selftest in several ways, including adding
     more checking of Lorenzo's recently added "permit mremap() move of
     multiple VMAs" feature.

  "selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
     extends the DAMON sysfs interface selftest so that it tests all
     possible user-requested parameters. Rather than the present minimal
     subset"

* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
  MAINTAINERS: add missing headers to mempory policy & migration section
  MAINTAINERS: add missing file to cgroup section
  MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
  MAINTAINERS: add missing zsmalloc file
  MAINTAINERS: add missing files to page alloc section
  MAINTAINERS: add missing shrinker files
  MAINTAINERS: move memremap.[ch] to hotplug section
  MAINTAINERS: add missing mm_slot.h file THP section
  MAINTAINERS: add missing interval_tree.c to memory mapping section
  MAINTAINERS: add missing percpu-internal.h file to per-cpu section
  mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
  selftests/damon: introduce _common.sh to host shared function
  selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
  selftests/damon/sysfs.py: test non-default parameters runtime commit
  selftests/damon/sysfs.py: generalize DAMON context commit assertion
  selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
  selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
  selftests/damon/sysfs.py: test DAMOS filters commitment
  selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
  selftests/damon/sysfs.py: test DAMOS destinations commitment
  ...
uprobes: revert ref_ctr_offset in uprobe_unregister error path 2025-07-10T05:57:53+00:00 Jiri Olsa olsajiri@gmail.com 2025-05-14T10:18:09+00:00 aa644c405291a419e92b112e2279c01c410e9a26 There's error path that could lead to inactive uprobe: 1) uprobe_register succeeds - updates instruction to int3 and changes ref_ctr from 0 to 1 2) uprobe_unregister fails - int3 stays in place, but ref_ctr is changed to 0 (it's not restored to 1 in the fail path) uprobe is leaked 3) another uprobe_register comes and re-uses the leaked uprobe and succeds - but int3 is already in place, so ref_ctr update is skipped and it stays 0 - uprobe CAN NOT be triggered now 4) uprobe_unregister fails because ref_ctr value is unexpected Fix this by reverting the updated ref_ctr value back to 1 in step 2), which is the case when uprobe_unregister fails (int3 stays in place), but we have already updated refctr. The new scenario will go as follows: 1) uprobe_register succeeds - updates instruction to int3 and changes ref_ctr from 0 to 1 2) uprobe_unregister fails - int3 stays in place and ref_ctr is reverted to 1.. uprobe is leaked 3) another uprobe_register comes and re-uses the leaked uprobe and succeds - but int3 is already in place, so ref_ctr update is skipped and it stays 1 - uprobe CAN be triggered now 4) uprobe_unregister succeeds Link: https://lkml.kernel.org/r/20250514101809.2010193-1-jolsa@kernel.org Fixes: 1cc33161a83d ("uprobes: Support SDT markers having reference count (semaphore)") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Suggested-by: Oleg Nesterov <oleg@redhat.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
There's error path that could lead to inactive uprobe:

  1) uprobe_register succeeds - updates instruction to int3 and
     changes ref_ctr from 0 to 1
  2) uprobe_unregister fails  - int3 stays in place, but ref_ctr
     is changed to 0 (it's not restored to 1 in the fail path)
     uprobe is leaked
  3) another uprobe_register comes and re-uses the leaked uprobe
     and succeds - but int3 is already in place, so ref_ctr update
     is skipped and it stays 0 - uprobe CAN NOT be triggered now
  4) uprobe_unregister fails because ref_ctr value is unexpected

Fix this by reverting the updated ref_ctr value back to 1 in step 2),
which is the case when uprobe_unregister fails (int3 stays in place), but
we have already updated refctr.

The new scenario will go as follows:

  1) uprobe_register succeeds - updates instruction to int3 and
     changes ref_ctr from 0 to 1
  2) uprobe_unregister fails  - int3 stays in place and ref_ctr
     is reverted to 1..  uprobe is leaked
  3) another uprobe_register comes and re-uses the leaked uprobe
     and succeds - but int3 is already in place, so ref_ctr update
     is skipped and it stays 1 - uprobe CAN be triggered now
  4) uprobe_unregister succeeds

Link: https://lkml.kernel.org/r/20250514101809.2010193-1-jolsa@kernel.org
Fixes: 1cc33161a83d ("uprobes: Support SDT markers having reference count (semaphore)")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm: filter zone device pages returned from folio_walk_start() 2025-07-10T05:42:16+00:00 Alistair Popple apopple@nvidia.com 2025-06-19T08:57:54+00:00 6b4a80e424cd2f99ca7262a8c0c725ec82e57b8a Previously dax pages were skipped by the pagewalk code as pud_special() or vm_normal_page{_pmd}() would be false for DAX pages. Now that dax pages are refcounted normally that is no longer the case, so the pagewalk code will start returning them. Most callers already explicitly filter for DAX or zone device pages so don't need updating. However some don't, so add checks to those callers. Link: https://lkml.kernel.org/r/4ecb7b357fc5b435588024770b88bbb695c30090.1750323463.git-series.apopple@nvidia.com Signed-off-by: Alistair Popple <apopple@nvidia.com> Cc: Balbir Singh <balbirs@nvidia.com> Cc: Björn Töpel <bjorn@kernel.org> Cc: Björn Töpel <bjorn@rivosinc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Deepak Gupta <debug@rivosinc.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Inki Dae <m.szyprowski@samsung.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: John Groves <john@groves.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> 
Previously dax pages were skipped by the pagewalk code as pud_special() or
vm_normal_page{_pmd}() would be false for DAX pages.  Now that dax pages
are refcounted normally that is no longer the case, so the pagewalk code
will start returning them.

Most callers already explicitly filter for DAX or zone device pages so
don't need updating.  However some don't, so add checks to those callers.

Link: https://lkml.kernel.org/r/4ecb7b357fc5b435588024770b88bbb695c30090.1750323463.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Björn Töpel <bjorn@kernel.org>
Cc: Björn Töpel <bjorn@rivosinc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Inki Dae <m.szyprowski@samsung.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Groves <john@groves.net>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>