Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer.  Adjust the
definition of sysctl_max_threads to match its prototype in
linux/sysctl.h which fixes the following sparse error/warning:

  kernel/fork.c:3050:47: warning: incorrect type in argument 3 (different address spaces)
  kernel/fork.c:3050:47:    expected void *
  kernel/fork.c:3050:47:    got void [noderef] __user *buffer
  kernel/fork.c:3036:5: error: symbol 'sysctl_max_threads' redeclared with different type (incompatible argument 3 (different address spaces)):
  kernel/fork.c:3036:5:    int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... )
  kernel/fork.c: note: in included file (through include/linux/key.h, include/linux/cred.h, include/linux/sched/signal.h, include/linux/sched/cputime.h):
  include/linux/sysctl.h:242:5: note: previously declared as:
  include/linux/sysctl.h:242:5:    int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... )

Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200825093647.24263-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull locking updates from Thomas Gleixner:
 "A set of locking fixes and updates:

   - Untangle the header spaghetti which causes build failures in
     various situations caused by the lockdep additions to seqcount to
     validate that the write side critical sections are non-preemptible.

   - The seqcount associated lock debug addons which were blocked by the
     above fallout.

     seqcount writers contrary to seqlock writers must be externally
     serialized, which usually happens via locking - except for strict
     per CPU seqcounts. As the lock is not part of the seqcount, lockdep
     cannot validate that the lock is held.

     This new debug mechanism adds the concept of associated locks.
     sequence count has now lock type variants and corresponding
     initializers which take a pointer to the associated lock used for
     writer serialization. If lockdep is enabled the pointer is stored
     and write_seqcount_begin() has a lockdep assertion to validate that
     the lock is held.

     Aside of the type and the initializer no other code changes are
     required at the seqcount usage sites. The rest of the seqcount API
     is unchanged and determines the type at compile time with the help
     of _Generic which is possible now that the minimal GCC version has
     been moved up.

     Adding this lockdep coverage unearthed a handful of seqcount bugs
     which have been addressed already independent of this.

     While generally useful this comes with a Trojan Horse twist: On RT
     kernels the write side critical section can become preemtible if
     the writers are serialized by an associated lock, which leads to
     the well known reader preempts writer livelock. RT prevents this by
     storing the associated lock pointer independent of lockdep in the
     seqcount and changing the reader side to block on the lock when a
     reader detects that a writer is in the write side critical section.

   - Conversion of seqcount usage sites to associated types and
     initializers"

* tag 'locking-urgent-2020-08-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  locking/seqlock, headers: Untangle the spaghetti monster
  locking, arch/ia64: Reduce <asm/smp.h> header dependencies by moving XTP bits into the new <asm/xtp.h> header
  x86/headers: Remove APIC headers from <asm/smp.h>
  seqcount: More consistent seqprop names
  seqcount: Compress SEQCNT_LOCKNAME_ZERO()
  seqlock: Fold seqcount_LOCKNAME_init() definition
  seqlock: Fold seqcount_LOCKNAME_t definition
  seqlock: s/__SEQ_LOCKDEP/__SEQ_LOCK/g
  hrtimer: Use sequence counter with associated raw spinlock
  kvm/eventfd: Use sequence counter with associated spinlock
  userfaultfd: Use sequence counter with associated spinlock
  NFSv4: Use sequence counter with associated spinlock
  iocost: Use sequence counter with associated spinlock
  raid5: Use sequence counter with associated spinlock
  vfs: Use sequence counter with associated spinlock
  timekeeping: Use sequence counter with associated raw spinlock
  xfrm: policy: Use sequence counters with associated lock
  netfilter: nft_set_rbtree: Use sequence counter with associated rwlock
  netfilter: conntrack: Use sequence counter with associated spinlock
  sched: tasks: Use sequence counter with associated spinlock
  ...

Patch series "kasan: support stack instrumentation for tag-based mode", v2.

This patch (of 5):

Prepare Software Tag-Based KASAN for stack tagging support.

With Tag-Based KASAN when kernel stacks are allocated via pagealloc (which
happens when CONFIG_VMAP_STACK is not enabled), they get tagged.  KASAN
instrumentation doesn't expect the sp register to be tagged, and this
leads to false-positive reports.

Fix by resetting the tag of kernel stack pointers after allocation.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: http://lkml.kernel.org/r/cover.1596199677.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/cover.1596544734.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/12d8c678869268dd0884b01271ab592f30792abf.1596544734.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/01c678b877755bcf29009176592402cdf6f2cb15.1596199677.git.andreyknvl@google.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203497
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently the kernel stack is being accounted per-zone.  There is no need
to do that.  In addition due to being per-zone, memcg has to keep a
separate MEMCG_KERNEL_STACK_KB.  Make the stat per-node and deprecate
MEMCG_KERNEL_STACK_KB as memcg_stat_item is an extension of
node_stat_item.  In addition localize the kernel stack stats updates to
account_kernel_stack().

Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200630161539.1759185-1-shakeelb@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull close_range() implementation from Christian Brauner:
 "This adds the close_range() syscall. It allows to efficiently close a
  range of file descriptors up to all file descriptors of a calling
  task.

  This is coordinated with the FreeBSD folks which have copied our
  version of this syscall and in the meantime have already merged it in
  April 2019:

    https://reviews.freebsd.org/D21627
    https://svnweb.freebsd.org/base?view=revision&revision=359836

  The syscall originally came up in a discussion around the new mount
  API and making new file descriptor types cloexec by default. During
  this discussion, Al suggested the close_range() syscall.

  First, it helps to close all file descriptors of an exec()ing task.
  This can be done safely via (quoting Al's example from [1] verbatim):

        /* that exec is sensitive */
        unshare(CLONE_FILES);
        /* we don't want anything past stderr here */
        close_range(3, ~0U);
        execve(....);

  The code snippet above is one way of working around the problem that
  file descriptors are not cloexec by default. This is aggravated by the
  fact that we can't just switch them over without massively regressing
  userspace. For a whole class of programs having an in-kernel method of
  closing all file descriptors is very helpful (e.g. demons, service
  managers, programming language standard libraries, container managers
  etc.).

  Second, it allows userspace to avoid implementing closing all file
  descriptors by parsing through /proc/<pid>/fd/* and calling close() on
  each file descriptor and other hacks. From looking at various
  large(ish) userspace code bases this or similar patterns are very
  common in service managers, container runtimes, and programming
  language runtimes/standard libraries such as Python or Rust.

  In addition, the syscall will also work for tasks that do not have
  procfs mounted and on kernels that do not have procfs support compiled
  in. In such situations the only way to make sure that all file
  descriptors are closed is to call close() on each file descriptor up
  to UINT_MAX or RLIMIT_NOFILE, OPEN_MAX trickery.

  Based on Linus' suggestion close_range() also comes with a new flag
  CLOSE_RANGE_UNSHARE to more elegantly handle file descriptor dropping
  right before exec. This would usually be expressed in the sequence:

        unshare(CLONE_FILES);
        close_range(3, ~0U);

  as pointed out by Linus it might be desirable to have this be a part
  of close_range() itself under a new flag CLOSE_RANGE_UNSHARE which
  gets especially handy when we're closing all file descriptors above a
  certain threshold.

  Test-suite as always included"

* tag 'close-range-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: add CLOSE_RANGE_UNSHARE tests
  close_range: add CLOSE_RANGE_UNSHARE
  tests: add close_range() tests
  arch: wire-up close_range()
  open: add close_range()

Pull fork cleanups from Christian Brauner:
 "This is cleanup series from when we reworked a chunk of the process
  creation paths in the kernel and switched to struct
  {kernel_}clone_args.

  High-level this does two main things:

   - Remove the double export of both do_fork() and _do_fork() where
     do_fork() used the incosistent legacy clone calling convention.

     Now we only export _do_fork() which is based on struct
     kernel_clone_args.

   - Remove the copy_thread_tls()/copy_thread() split making the
     architecture specific HAVE_COYP_THREAD_TLS config option obsolete.

  This switches all remaining architectures to select
  HAVE_COPY_THREAD_TLS and thus to the copy_thread_tls() calling
  convention. The current split makes the process creation codepaths
  more convoluted than they need to be. Each architecture has their own
  copy_thread() function unless it selects HAVE_COPY_THREAD_TLS then it
  has a copy_thread_tls() function.

  The split is not needed anymore nowadays, all architectures support
  CLONE_SETTLS but quite a few of them never bothered to select
  HAVE_COPY_THREAD_TLS and instead simply continued to use copy_thread()
  and use the old calling convention. Removing this split cleans up the
  process creation codepaths and paves the way for implementing clone3()
  on such architectures since it requires the copy_thread_tls() calling
  convention.

  After having made each architectures support copy_thread_tls() this
  series simply renames that function back to copy_thread(). It also
  switches all architectures that call do_fork() directly over to
  _do_fork() and the struct kernel_clone_args calling convention. This
  is a corollary of switching the architectures that did not yet support
  it over to copy_thread_tls() since do_fork() is conditional on not
  supporting copy_thread_tls() (Mostly because it lacks a separate
  argument for tls which is trivial to fix but there's no need for this
  function to exist.).

  The do_fork() removal is in itself already useful as it allows to to
  remove the export of both do_fork() and _do_fork() we currently have
  in favor of only _do_fork(). This has already been discussed back when
  we added clone3(). The legacy clone() calling convention is - as is
  probably well-known - somewhat odd:

    #
    # ABI hall of shame
    #
    config CLONE_BACKWARDS
    config CLONE_BACKWARDS2
    config CLONE_BACKWARDS3

  that is aggravated by the fact that some architectures such as sparc
  follow the CLONE_BACKWARDSx calling convention but don't really select
  the corresponding config option since they call do_fork() directly.

  So do_fork() enforces a somewhat arbitrary calling convention in the
  first place that doesn't really help the individual architectures that
  deviate from it. They can thus simply be switched to _do_fork()
  enforcing a single calling convention. (I really hope that any new
  architectures will __not__ try to implement their own calling
  conventions...)

  Most architectures already have made a similar switch (m68k comes to
  mind).

  Overall this removes more code than it adds even with a good portion
  of added comments. It simplifies a chunk of arch specific assembly
  either by moving the code into C or by simply rewriting the assembly.

  Architectures that have been touched in non-trivial ways have all been
  actually boot and stress tested: sparc and ia64 have been tested with
  Debian 9 images. They are the two architectures which have been
  touched the most. All non-trivial changes to architectures have seen
  acks from the relevant maintainers. nios2 with a custom built
  buildroot image. h8300 I couldn't get something bootable to test on
  but the changes have been fairly automatic and I'm sure we'll hear
  people yell if I broke something there.

  All other architectures that have been touched in trivial ways have
  been compile tested for each single patch of the series via git rebase
  -x "make ..." v5.8-rc2. arm{64} and x86{_64} have been boot tested
  even though they have just been trivially touched (removal of the
  HAVE_COPY_THREAD_TLS macro from their Kconfig) because well they are
  basically "core architectures" and since it is trivial to get your
  hands on a useable image"

* tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  arch: rename copy_thread_tls() back to copy_thread()
  arch: remove HAVE_COPY_THREAD_TLS
  unicore: switch to copy_thread_tls()
  sh: switch to copy_thread_tls()
  nds32: switch to copy_thread_tls()
  microblaze: switch to copy_thread_tls()
  hexagon: switch to copy_thread_tls()
  c6x: switch to copy_thread_tls()
  alpha: switch to copy_thread_tls()
  fork: remove do_fork()
  h8300: select HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
  nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
  ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
  sparc: unconditionally enable HAVE_COPY_THREAD_TLS
  sparc: share process creation helpers between sparc and sparc64
  sparc64: enable HAVE_COPY_THREAD_TLS
  fork: fold legacy_clone_args_valid() into _do_fork()

Pull execve updates from Eric Biederman:
 "During the development of v5.7 I ran into bugs and quality of
  implementation issues related to exec that could not be easily fixed
  because of the way exec is implemented. So I have been diggin into
  exec and cleaning up what I can.

  This cycle I have been looking at different ideas and different
  implementations to see what is possible to improve exec, and cleaning
  the way exec interfaces with in kernel users. Only cleaning up the
  interfaces of exec with rest of the kernel has managed to stabalize
  and make it through review in time for v5.9-rc1 resulting in 2 sets of
  changes this cycle.

   - Implement kernel_execve

   - Make the user mode driver code a better citizen

  With kernel_execve the code size got a little larger as the copying of
  parameters from userspace and copying of parameters from userspace is
  now separate. The good news is kernel threads no longer need to play
  games with set_fs to use exec. Which when combined with the rest of
  Christophs set_fs changes should security bugs with set_fs much more
  difficult"

* 'exec-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
  exec: Implement kernel_execve
  exec: Factor bprm_stack_limits out of prepare_arg_pages
  exec: Factor bprm_execve out of do_execve_common
  exec: Move bprm_mm_init into alloc_bprm
  exec: Move initialization of bprm->filename into alloc_bprm
  exec: Factor out alloc_bprm
  exec: Remove unnecessary spaces from binfmts.h
  umd: Stop using split_argv
  umd: Remove exit_umh
  bpfilter: Take advantage of the facilities of struct pid
  exit: Factor thread_group_exited out of pidfd_poll
  umd: Track user space drivers with struct pid
  bpfilter: Move bpfilter_umh back into init data
  exec: Remove do_execve_file
  umh: Stop calling do_execve_file
  umd: Transform fork_usermode_blob into fork_usermode_driver
  umd: Rename umd_info.cmdline umd_info.driver_name
  umd: For clarity rename umh_info umd_info
  umh: Separate the user mode driver and the user mode helper support
  umh: Remove call_usermodehelper_setup_file.
  ...

Pull seccomp updates from Kees Cook:
 "There are a bunch of clean ups and selftest improvements along with
  two major updates to the SECCOMP_RET_USER_NOTIF filter return:
  EPOLLHUP support to more easily detect the death of a monitored
  process, and being able to inject fds when intercepting syscalls that
  expect an fd-opening side-effect (needed by both container folks and
  Chrome). The latter continued the refactoring of __scm_install_fd()
  started by Christoph, and in the process found and fixed a handful of
  bugs in various callers.

   - Improved selftest coverage, timeouts, and reporting

   - Add EPOLLHUP support for SECCOMP_RET_USER_NOTIF (Christian Brauner)

   - Refactor __scm_install_fd() into __receive_fd() and fix buggy
     callers

   - Introduce 'addfd' command for SECCOMP_RET_USER_NOTIF (Sargun
     Dhillon)"

* tag 'seccomp-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (30 commits)
  selftests/seccomp: Test SECCOMP_IOCTL_NOTIF_ADDFD
  seccomp: Introduce addfd ioctl to seccomp user notifier
  fs: Expand __receive_fd() to accept existing fd
  pidfd: Replace open-coded receive_fd()
  fs: Add receive_fd() wrapper for __receive_fd()
  fs: Move __scm_install_fd() to __receive_fd()
  net/scm: Regularize compat handling of scm_detach_fds()
  pidfd: Add missing sock updates for pidfd_getfd()
  net/compat: Add missing sock updates for SCM_RIGHTS
  selftests/seccomp: Check ENOSYS under tracing
  selftests/seccomp: Refactor to use fixture variants
  selftests/harness: Clean up kern-doc for fixtures
  seccomp: Use -1 marker for end of mode 1 syscall list
  seccomp: Fix ioctl number for SECCOMP_IOCTL_NOTIF_ID_VALID
  selftests/seccomp: Rename user_trap_syscall() to user_notif_syscall()
  selftests/seccomp: Make kcmp() less required
  seccomp: Use pr_fmt
  selftests/seccomp: Improve calibration loop
  selftests/seccomp: use 90s as timeout
  selftests/seccomp: Expand benchmark to per-filter measurements
  ...

Pull scheduler updates from Ingo Molnar:

 - Improve uclamp performance by using a static key for the fast path

 - Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
   better power efficiency of RT tasks on battery powered devices.
   (The default is to maximize performance & reduce RT latencies.)

 - Improve utime and stime tracking accuracy, which had a fixed boundary
   of error, which created larger and larger relative errors as the
   values become larger. This is now replaced with more precise
   arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.

 - Improve the deadline scheduler, such as making it capacity aware

 - Improve frequency-invariant scheduling

 - Misc cleanups in energy/power aware scheduling

 - Add sched_update_nr_running tracepoint to track changes to nr_running

 - Documentation additions and updates

 - Misc cleanups and smaller fixes

* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
  sched/doc: Document capacity aware scheduling
  sched: Document arch_scale_*_capacity()
  arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
  Documentation/sysctl: Document uclamp sysctl knobs
  sched/uclamp: Add a new sysctl to control RT default boost value
  sched/uclamp: Fix a deadlock when enabling uclamp static key
  sched: Remove duplicated tick_nohz_full_enabled() check
  sched: Fix a typo in a comment
  sched/uclamp: Remove unnecessary mutex_init()
  arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
  sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
  arch_topology, sched/core: Cleanup thermal pressure definition
  trace/events/sched.h: fix duplicated word
  linux/sched/mm.h: drop duplicated words in comments
  smp: Fix a potential usage of stale nr_cpus
  sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
  sched: nohz: stop passing around unused "ticks" parameter.
  sched: Better document ttwu()
  sched: Add a tracepoint to track rq->nr_running
  ...

Pull v5.9 KCSAN bits from Paul E. McKenney.

Perhaps the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again.

Signed-off-by: Ingo Molnar <mingo@kernel.org>