linux-toradex.git/kernel/irq/chip.c, branch v4.12

genirq: Fix chained interrupt data ordering

2017-05-16T13:03:26+00:00

irq_set_chained_handler_and_data() sets up the chained interrupt and then
stores the handler data.

That's racy against an immediate interrupt which gets handled before the
store of the handler data happened. The handler will dereference a NULL
pointer and crash.

Cure it by storing handler data before installing the chained handler.

Reported-by: Borislav Petkov 
Signed-off-by: Thomas Gleixner 
Cc: stable@vger.kernel.org

genirq: Add support for nested shared IRQs

2017-03-11T11:57:03+00:00

On a specific audio system an interrupt input of an audio CODEC is used as a
shared interrupt. That interrupt input is handled by a CODEC specific irq
chip driver and triggers a CPU interrupt via the CODEC irq output line.

The CODEC interrupt handler demultiplexes the CODEC interrupt inputs and
the interrupt handlers for these demultiplexed inputs run nested in the
context of the CODEC interrupt handler.

The demultiplexed interrupts use handle_nested_irq() as their interrupt
handler, which unfortunately has no support for shared interrupts. So the
above hardware cannot be supported.

Add shared interrupt support to handle_nested_irq() by iterating over the
interrupt action chain.

[ tglx: Massaged changelog ]

Signed-off-by: Charles Keepax 
Cc: patches@opensource.wolfsonmicro.com
Link: http://lkml.kernel.org/r/1488904098-5350-1-git-send-email-ckeepax@opensource.wolfsonmicro.com
Signed-off-by: Thomas Gleixner

genirq: Make function __irq_do_set_handler() static

2016-09-25T20:46:52+00:00

Fixes the following sparse warning:

kernel/irq/chip.c:786:1: warning:
 symbol '__irq_do_set_handler' was not declared. Should it be static?

Signed-off-by: Wei Yongjun 
Link: http://lkml.kernel.org/r/1474817799-18676-1-git-send-email-weiyj.lk@gmail.com
Signed-off-by: Thomas Gleixner

Merge branch 'irq/urgent' into irq/core

2016-09-20T21:20:32+00:00

Merge urgent fixes so pending patches for 4.9 can be applied.

genirq: Skip chained interrupt trigger setup if type is IRQ_TYPE_NONE

2016-09-19T09:31:36+00:00

There is no point in trying to configure the trigger of a chained
interrupt if no trigger information has been configured. At best
this is ignored, and at the worse this confuses the underlying
irqchip (which is likely not to handle such a thing), and
unnecessarily alarms the user.

Only apply the configuration if type is not IRQ_TYPE_NONE.

Fixes: 1e12c4a9393b ("genirq: Correctly configure the trigger on chained interrupts")
Reported-and-tested-by: Geert Uytterhoeven 
Signed-off-by: Marc Zyngier 
Link: https://lkml.kernel.org/r/CAMuHMdVW1eTn20=EtYcJ8hkVwohaSuH_yQXrY2MGBEvZ8fpFOg@mail.gmail.com
Link: http://lkml.kernel.org/r/1474274967-15984-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner

Merge tag 'irqchip-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

2016-09-14T18:53:26+00:00

Merge the first drop of irqchip updates for 4.9 from Marc Zyngier:

- ACPI IORT core code
- IORT support for the GICv3 ITS
- A few of GIC cleanups

genirq: No need to mask non trigger mode flags before __irq_set_trigger()

2016-09-06T10:14:12+00:00

Some callers of __irq_set_trigger() masks all flags except trigger mode
flags. This is unnecessary, ase __irq_set_trigger() already does this
before usage of flags.

[ tglx: Moved the flag mask and adjusted comment. Removed the hunk in
  	enable_percpu_irq() as it is required there ]

Signed-off-by: Alexander Kuleshov 
Link: http://lkml.kernel.org/r/20160719095408.13778-1-kuleshovmail@gmail.com
Signed-off-by: Thomas Gleixner

genirq: Robustify handle_percpu_devid_irq()

2016-09-02T16:06:49+00:00

The percpu_devid handler is not robust against spurious interrupts. If a
spurious interrupt happens and no action is installed then the handler
crashes with a NULL pointer dereference.

Add a sanity check for this and log the wreckage once in dmesg.

Reported-by: Majun 
Signed-off-by: Thomas Gleixner 
Cc: Mark Rutland 
Cc: Marc Zyngier 
Cc: guohanjun@huawei.com
Cc: dingtianhong@huawei.com
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1609021436160.5647@nanos

genirq: Correctly configure the trigger on chained interrupts

2016-08-17T10:29:31+00:00

Commit 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ")
moved the trigger configuration call from the irqdomain mapping to
the interrupt being actually requested.

This patch failed to handle the case where we configure a chained
interrupt, which doesn't get requested through the usual path.

In order to solve this, let's call __irq_set_trigger just before
starting the cascade interrupt. Special care must be taken to
make the flow handler stick, as the .irq_set_type method could
have reset it (it doesn't know we're dealing with a chained
interrupt).

Based on an initial patch by Jon Hunter.

Fixes: 1e2a7d78499e ("irqdomain: Don't set type when mapping an IRQ")
Reported-by: John Stultz 
Reported-by: Linus Walleij 
Tested-by: John Stultz 
Acked-by: Jon Hunter 
Signed-off-by: Marc Zyngier

genirq: Add untracked irq handler

2016-06-18T08:00:55+00:00

This adds a software irq handler for controllers that multiplex
interrupts from multiple devices, but don't know which device generated
the interrupt. For these devices, the irq handler that demuxes must
check every action for every software irq using the same h/w irq in order
to find out which device generated the interrupt. This will inevitably
trigger spurious interrupt detection if we are noting the irq.

The new irq handler does not track the handling for spurious interrupt
detection. An irq that uses this also won't get stats tracked since it
didn't generate the interrupt, nor added to randomness since they are
not random.

Signed-off-by: Keith Busch 
Cc: Bjorn Helgaas 
Cc: linux-pci@vger.kernel.org
Cc: Jon Derrick 
Link: http://lkml.kernel.org/r/1466200821-29159-1-git-send-email-keith.busch@intel.com
Signed-off-by: Thomas Gleixner