Some interrupt chips are connected to a "slow" bus (i2c, spi ...). The
bus access needs to sleep and therefor cannot be called in atomic
contexts.

Some of the generic interrupt management functions like disable_irq(),
enable_irq() ... call interrupt chip functions with the irq_desc->lock
held and interrupts disabled. This does not work for such devices.

Provide a separate synchronization mechanism for such interrupt
chips. The irq_chip structure is extended by two optional functions
(bus_lock and bus_sync_and_unlock).

The idea is to serialize the bus access for those operations in the
core code so that drivers which are behind that bus operated interrupt
controller do not have to worry about it and just can use the normal
interfaces. To achieve this we add two function pointers to the
irq_chip: bus_lock and bus_sync_unlock.

bus_lock() is called to serialize access to the interrupt controller
bus.

Now the core code can issue chip->mask/unmask ... commands without
changing the fast path code at all. The chip implementation merily
stores that information in a chip private data structure and
returns. No bus interaction as these functions are called from atomic
context.

After that bus_sync_unlock() is called outside the atomic context. Now
the chip implementation issues the bus commands, waits for completion
and unlocks the interrupt controller bus.

The irq_chip implementation as pseudo code:

struct irq_chip_data {
       struct mutex   mutex;
       unsigned int   irq_offset;
       unsigned long  mask;
       unsigned long  mask_status;
}

static void bus_lock(unsigned int irq)
{
        struct irq_chip_data *data = get_irq_desc_chip_data(irq);

        mutex_lock(&data->mutex);
}

static void mask(unsigned int irq)
{
        struct irq_chip_data *data = get_irq_desc_chip_data(irq);

        irq -= data->irq_offset;
        data->mask |= (1 << irq);
}

static void unmask(unsigned int irq)
{
        struct irq_chip_data *data = get_irq_desc_chip_data(irq);

        irq -= data->irq_offset;
        data->mask &= ~(1 << irq);
}

static void bus_sync_unlock(unsigned int irq)
{
        struct irq_chip_data *data = get_irq_desc_chip_data(irq);

        if (data->mask != data->mask_status) {
                do_bus_magic_to_set_mask(data->mask);
                data->mask_status = data->mask;
        }
        mutex_unlock(&data->mutex);
}

The device drivers can use request_threaded_irq, free_irq, disable_irq
and enable_irq as usual with the only restriction that the calls need
to come from non atomic context.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Trilok Soni <soni.trilok@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Brian Swetland <swetland@google.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: m.szyprowski@samsung.com
Cc: t.fujak@samsung.com
Cc: kyungmin.park@samsung.com,
Cc: David Brownell <david-b@pacbell.net>
Cc: Daniel Ribeiro <drwyrm@gmail.com>
Cc: arve@android.com
Cc: Barry Song <21cnbao@gmail.com>

irq_set_thread_affinity() calls set_cpus_allowed_ptr() which might
sleep, but irq_set_thread_affinity() is called with desc->lock held
and can be called from hard interrupt context as well. The code has
another bug as it does not hold a ref on the task struct as required
by set_cpus_allowed_ptr().

Just set the IRQTF_AFFINITY bit in action->thread_flags. The next time
the thread runs it migrates itself. Solves all of the above problems
nicely.

Add kerneldoc to irq_set_thread_affinity() while at it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>

This simplifies the node awareness of the code. All our allocators
only deal with a NUMA node ID locality not with CPU ids anyway - so
there's no need to maintain (and transform) a CPU id all across the
IRq layer.

v2: keep move_irq_desc related

[ Impact: cleanup, prepare IRQ code to be NUMA-aware ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <49F65536.2020300@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

irq_set_affinity() and move_masked_irq() try to assign affinity
before calling chip set_affinity(). Some archs are assigning it
in ->set_affinity() again.

We do something like:

 cpumask_cpy(desc->affinity, mask);
 desc->chip->set_affinity(mask);

But in the failure path, affinity should not be touched - otherwise
we'll end up with a different affinity mask despite the failure to
migrate the IRQ.

So try to update the afffinity only if set_affinity returns with 0.
Also call irq_set_thread_affinity accordingly.

v2: update after "irq, x86: Remove IRQ_DISABLED check in process context IRQ move"
v3: according to Ingo, change set_affinity() in irq_chip should return int.
v4: update comments by removing moving irq_desc code.

[ Impact: fix /proc/irq/*/smp_affinity setting corner case bug ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F65509.60307@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Introduce helper functions allowing us to prevent device drivers from
getting any interrupts (without disabling interrupts on the CPU)
during suspend (or hibernation) and to make them start to receive
interrupts again during the subsequent resume.  These functions make it
possible to keep timer interrupts enabled while the "late" suspend and
"early" resume callbacks provided by device drivers are being
executed.  In turn, this allows device drivers' "late" suspend and
"early" resume callbacks to sleep, execute ACPI callbacks etc.

The functions introduced here will be used to rework the handling of
interrupts during suspend (hibernation) and resume.  Namely,
interrupts will only be disabled on the CPU right before suspending
sysdevs, while device drivers will be prevented from receiving
interrupts, with the help of the new helper function, before their
"late" suspend callbacks run (and analogously during resume).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>

Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: get correct kstat_irqs [/proc/interrupts] for msi/msi-x etc

need to call clear_kstat_irqs(), so when we reuse that irq_desc,
we get correct kstat in /proc/interrupts.

This makes /proc/interrupts not have <NULL> entries.

Don't need to worry about arch that doesn't support genirq, because they
will not call dynamic_irq_cleanup().

v2: simplify and make clear_kstat_irqs more robust

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: allocate irq_desc_ptrs in preparation for making it variable-sized.

This addresses this memory usage bump when NR_CPUS bumped from 128 to 4096:

    34816   +229376    264192  +658%  irq_desc_ptrs(.data.read_mostly)

The patch is split into two parts, the first simply allocates the
irq_desc_ptrs array.  Then next will deal with making it variable.
This is only when CONFIG_SPARSE_IRQS=y.

Signed-off-by: Mike Travis <travis@sgi.com>

Impact: improve NUMA handling by migrating irq_desc on smp_affinity changes

if CONFIG_NUMA_MIGRATE_IRQ_DESC is set:

-  make irq_desc to go with affinity aka irq_desc moving etc
-  call move_irq_desc in irq_complete_move()
-  legacy irq_desc is not moved, because they are allocated via static array

for logical apic mode, need to add move_desc_in_progress_in_same_domain,
otherwise it will not be moved ==> also could need two phases to get
irq_desc moved.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Impact: preserve user-modified affinities on interrupts

Kumar Galak noticed that commit
18404756765c713a0be4eb1082920c04822ce588 (genirq: Expose default irq
affinity mask (take 3))

overrides an already set affinity setting across a free /
request_irq(). Happens e.g. with ifdown/ifup of a network device.

Change the logic to mark the affinities as set and keep them
intact. This also fixes the unlocked access to irq_desc in
irq_select_affinity() when called from irq_affinity_proc_write()

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>