linux-toradex.git/kernel/irq, branch v3.0-rc3

genirq: Prevent potential NULL dereference in irq_set_irq_wake()

2011-06-10T08:53:42+00:00

In kernel/irq/manage.c::irq_set_irq_wake() we call
irq_get_desc_buslock() which may return NULL, but the code
dereferences the result unconditionally.

irq_set_irq_wake() has lots of callers - I checked a few and I couldn't
find anything that guarantees that they won't call it with some input that
will cause irq_get_desc_buslock() to return NULL, so I think it's a good
thing to test and -EINVAL was the most sane error code in this situation
that I could think of.

Not all callers test the return value of irq_set_irq_wake(), but those
that do take != 0 to mean error as far as I can see, so they should be
fine. I guess those that don't test actually should, but that's a
different issue.

Signed-off-by: Jesper Juhl 
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1106092300360.17868@swampdragon.chaosbits.net
Signed-off-by: Thomas Gleixner

genirq: Ensure we locate the passed IRQ in irq_alloc_descs()

2011-06-03T12:53:16+00:00

When irq_alloc_descs() is called with no base IRQ specified then it will
search for a range of IRQs starting from a specified base address. In the
case where an IRQ is specified it still does this search in order to ensure
that none of the requested range is already allocated and it still uses the
from parameter to specify the base for the search. This means that in the
case where a base is specified but from is zero (which is reasonable as
any IRQ number is in the range specified by a zero from) the function will
get confused and try to allocate the first suitably sized block of free IRQs
it finds.

Instead use a specified IRQ as the base address for the search, and insist
that any from that is specified can support that IRQ.

Signed-off-by: Mark Brown 
Link: http://lkml.kernel.org/r/1307037313-15733-1-git-send-email-broonie@opensource.wolfsonmicro.com
Signed-off-by: Thomas Gleixner

genirq: Fix descriptor init on non-sparse IRQs

2011-06-03T12:53:16+00:00

The genirq changes are initializing descriptors for sparse IRQs quite
differently from how non-sparse (stacked?) IRQs are initialized, with
the effect that on my platform all IRQs are default-disabled on sparse
IRQs and default-enabled if non-sparse IRQs are used, crashing some
GPIO driver.

Fix this by refactoring the non-sparse IRQs to use the same descriptor
init function as the sparse IRQs.

Signed-off: Linus Walleij 
Link: http://lkml.kernel.org/r/1306858479-16622-1-git-send-email-linus.walleij@stericsson.com
Cc: stable@kernel.org # 2.6.39
Signed-off-by: Thomas Gleixner

irq: Handle spurios irq detection for threaded irqs

2011-06-03T12:53:15+00:00

The detection of spurios interrupts is currently limited to first level
handler. In force-threaded mode we never notice if the threaded irq does
not feel responsible.
This patch catches the return value of the threaded handler and forwards
it to the spurious detector. If the primary handler returns only
IRQ_WAKE_THREAD then the spourious detector ignores it because it gets
called again from the threaded handler.

[ tglx: Report the erroneous return value early and bail out ]

Signed-off-by: Sebastian Andrzej Siewior 
Link: http://lkml.kernel.org/r/1306824972-27067-2-git-send-email-sebastian@breakpoint.cc
Signed-off-by: Thomas Gleixner

genirq: Print threaded handler in spurious debug output

2011-06-03T12:53:15+00:00

In forced threaded mode (or with an explicit threaded handler) we only
see the primary handler, but not the threaded handler.

Signed-off-by: Sebastian Andrzej Siewior 
Link: http://lkml.kernel.org/r/1306824972-27067-1-git-send-email-sebastian@breakpoint.cc
Signed-off-by: Thomas Gleixner

irq: Remove smp_affinity_list when unregister irq proc

2011-05-26T11:15:28+00:00

commit 4b06042(bitmap, irq: add smp_affinity_list interface to
/proc/irq) causes the following warning:

[  274.239500] WARNING: at fs/proc/generic.c:850 remove_proc_entry+0x24c/0x27a()
[  274.251761] remove_proc_entry: removing non-empty directory 'irq/184',
    	       leaking at least 'smp_affinity_list'

Remove the new file in the exit path.

Signed-off-by: Yinghai Lu 
Cc: Mike Travis 
Link: http://lkml.kernel.org/r/4DDDE094.6050505@kernel.org
Signed-off-by: Thomas Gleixner

bitmap, irq: add smp_affinity_list interface to /proc/irq

2011-05-25T15:39:45+00:00

Manually adjusting the smp_affinity for IRQ's becomes unwieldy when the
cpu count is large.

Setting smp affinity to cpus 256 to 263 would be:

	echo 000000ff,00000000,00000000,00000000,00000000,00000000,00000000,00000000 > smp_affinity

instead of:

	echo 256-263 > smp_affinity_list

Think about what it looks like for cpus around say, 4088 to 4095.

We already have many alternate "list" interfaces:

/sys/devices/system/cpu/cpuX/indexY/shared_cpu_list
/sys/devices/system/cpu/cpuX/topology/thread_siblings_list
/sys/devices/system/cpu/cpuX/topology/core_siblings_list
/sys/devices/system/node/nodeX/cpulist
/sys/devices/pci***/***/local_cpulist

Add a companion interface, smp_affinity_list to use cpu lists instead of
cpu maps.  This conforms to other companion interfaces where both a map
and a list interface exists.

This required adding a bitmap_parselist_user() function in a manner
similar to the bitmap_parse_user() function.

[akpm@linux-foundation.org: make __bitmap_parselist() static]
Signed-off-by: Mike Travis 
Cc: Thomas Gleixner 
Cc: Jack Steiner 
Cc: Lee Schermerhorn 
Cc: Andy Shevchenko 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2011-05-20T00:30:15+00:00

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq: Export functions to allow modular irq drivers
  genirq: Uninline and sanity check generic_handle_irq()
  genirq: Remove pointless ifdefs
  genirq: Make generic irq chip depend on CONFIG_GENERIC_IRQ_CHIP
  genirq: Add chip suspend and resume callbacks
  genirq: Implement a generic interrupt chip
  genirq: Support per-IRQ thread disabling.
  genirq: irq_desc: Document preflow_handler and affinity_hint
  genirq: Update DocBook comments
  genirq: Forgotten updates/deletions after removal of compat code

irq: Export functions to allow modular irq drivers

2011-05-18T12:59:08+00:00

Export handle_simple_irq, irq_modify_status, irq_alloc_descs,
irq_free_descs and generic_handle_irq to allow their usage in
modules. First user is IIO, which wants to be built modular, but needs
to be able to create irq chips, allocate and configure interrupt
descriptors and handle demultiplexing interrupts.

[ tglx: Moved the uninlinig of generic_handle_irq to a separate patch ]

Signed-off-by: Jonathan Cameron 
Link: http://lkml.kernel.org/r/%3C1305711544-505-1-git-send-email-jic23%40cam.ac.uk%3E
Signed-off-by: Thomas Gleixner

genirq: Uninline and sanity check generic_handle_irq()

2011-05-18T12:59:08+00:00

generic_handle_irq() is missing a NULL pointer check for the result of
irq_to_desc. This was a not a big problem, but we want to expose it to
drivers, so we better have sanity checks in place. Add a return value
as well, which indicates that the irq number was valid and the handler
was invoked.

Based on the pure code move from Jonathan Cameron.

Signed-off-by: Thomas Gleixner 
Cc: Jonathan Cameron