linux-toradex.git/kernel/irq, branch v3.0.16

genirq: Fix race condition when stopping the irq thread

2011-12-09T16:52:46+00:00

commit 550acb19269d65f32e9ac4ddb26c2b2070e37f1c upstream.

In irq_wait_for_interrupt(), the should_stop member is verified before
setting the task's state to TASK_INTERRUPTIBLE and calling schedule().
In case kthread_stop sets should_stop and wakes up the process after
should_stop is checked by the irq thread but before the task's state
is changed, the irq thread might never exit:

kthread_stop                    irq_wait_for_interrupt
------------                    ----------------------

                                 ...
...                              while (!kthread_should_stop()) {
kthread->should_stop = 1;
wake_up_process(k);
wait_for_completion(&kthread->exited);
...
                                     set_current_state(TASK_INTERRUPTIBLE);

                                     ...

                                     schedule();
                                 }

Fix this by checking if the thread should stop after modifying the
task's state.

[ tglx: Simplified it a bit ]

Signed-off-by: Ido Yariv 
Link: http://lkml.kernel.org/r/1322740508-22640-1-git-send-email-ido@wizery.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: fix regression in irqfixup, irqpoll

2011-12-09T16:52:27+00:00

commit 52553ddffad76ccf192d4dd9ce88d5818f57f62a upstream.

Commit fa27271bc8d2("genirq: Fixup poll handling") introduced a
regression that broke irqfixup/irqpoll for some hardware configurations.

Amidst reorganizing 'try_one_irq', that patch removed a test that
checked for 'action->handler' returning IRQ_HANDLED, before acting on
the interrupt.  Restoring this test back returns the functionality lost
since 2.6.39.  In the current set of tests, after 'action' is set, it
must precede '!action->next' to take effect.

With this and my previous patch to irq/spurious.c, c75d720fca8a, all
IRQ regressions that I have encountered are fixed.

Signed-off-by: Edward Donovan 
Reported-and-tested-by: Rogério Brito 
Cc: Thomas Gleixner 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

genirq: Fix irqfixup, irqpoll regression

2011-11-26T17:09:51+00:00

commit c75d720fca8a91ce99196d33adea383621027bf2 upstream.

commit d05c65fff0 ("genirq: spurious: Run only one poller at a time")
introduced a regression, leaving the boot options 'irqfixup' and
'irqpoll' non-functional. The patch placed tests in each function, to
exit if the function is already running. The test in 'misrouted_irq'
exited when it should have proceeded, effectively disabling
'misrouted_irq' and 'poll_spurious_irqs'.

The check for an already running poller needs to be "!= 1" not "== 1"
as "1" is the value when the first poller starts running.

Signed-off-by: Edward Donovan 
Cc: maciej.rutecki@gmail.com
Link: http://lkml.kernel.org/r/1320175784-6745-1-git-send-email-edward.donovan@numble.net
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier

2011-11-11T17:35:54+00:00

commit 9bab0b7fbaceec47d32db51cd9e59c82fb071f5a upstream.

This adds a mechanism to resume selected IRQs during syscore_resume
instead of dpm_resume_noirq.

Under Xen we need to resume IRQs associated with IPIs early enough
that the resched IPI is unmasked and we can therefore schedule
ourselves out of the stop_machine where the suspend/resume takes
place.

This issue was introduced by 676dc3cf5bc3 "xen: Use IRQF_FORCE_RESUME".

Signed-off-by: Ian Campbell 
Cc: Rafael J. Wysocki 
Cc: Jeremy Fitzhardinge 
Cc: xen-devel 
Cc: Konrad Rzeszutek Wilk 
Link: http://lkml.kernel.org/r/1318713254.11016.52.camel@dagon.hellion.org.uk
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: Make irq_shutdown() symmetric vs. irq_startup again

2011-10-03T18:40:27+00:00

commit ed585a651681e822089087b426e6ebfb6d3d9873 upstream.

If an irq_chip provides .irq_shutdown(), but neither of .irq_disable() or
.irq_mask(), free_irq() crashes when jumping to NULL.
Fix this by only trying .irq_disable() and .irq_mask() if there's no
.irq_shutdown() provided.

This revives the symmetry with irq_startup(), which tries .irq_startup(),
.irq_enable(), and irq_unmask(), and makes it consistent with the comment for
irq_chip.irq_shutdown() in , which says:

 * @irq_shutdown:	shut down the interrupt (defaults to ->disable if NULL)

This is also how __free_irq() behaved before the big overhaul, cfr. e.g.
3b56f0585fd4c02d047dc406668cb40159b2d340 ("genirq: Remove bogus conditional"),
where the core interrupt code always overrode .irq_shutdown() to
.irq_disable() if .irq_shutdown() was NULL.

Signed-off-by: Geert Uytterhoeven 
Cc: linux-m68k@lists.linux-m68k.org
Link: http://lkml.kernel.org/r/1315742394-16036-2-git-send-email-geert@linux-m68k.org
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: Fix wrong bit operation

2011-08-29T20:29:06+00:00

commit 1dd75f91ae713049eb6baaa640078f3a6549e522 upstream.

(!msk & 0x01) should be !(msk & 0x01)

Signed-off-by: Jonghwan Choi 
Link: http://lkml.kernel.org/r/1311229754-6003-1-git-send-email-jhbird.choi@samsung.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: replace irq_gc_ack() with {set,clr}_bit variants (fwd)

2011-07-07T16:02:26+00:00

This fixes a regression introduced by e59347a "arm: orion:
Use generic irq chip".

Depending on the device, interrupts acknowledgement is done by setting
or by clearing a dedicated register. Replace irq_gc_ack() with some
{set,clr}_bit variants allows to handle both cases.

Note that this patch affects the following SoCs: Davinci, Samsung and
Orion. Except for this last, the change is minor: irq_gc_ack() is just
renamed into irq_gc_ack_set_bit().

For the Orion SoCs, the edge GPIO interrupts support is currently
broken. irq_gc_ack() try to acknowledge a such interrupt by setting
the corresponding cause register bit. The Orion GPIO device expect the
opposite. To fix this issue, the irq_gc_ack_clr_bit() variant is used.

Tested on Network Space v2.

Reported-by: Joey Oravec 
Signed-off-by: Simon Guinot 
Signed-off-by: Arnd Bergmann

genirq: Prevent potential NULL dereference in irq_set_irq_wake()

2011-06-10T08:53:42+00:00

In kernel/irq/manage.c::irq_set_irq_wake() we call
irq_get_desc_buslock() which may return NULL, but the code
dereferences the result unconditionally.

irq_set_irq_wake() has lots of callers - I checked a few and I couldn't
find anything that guarantees that they won't call it with some input that
will cause irq_get_desc_buslock() to return NULL, so I think it's a good
thing to test and -EINVAL was the most sane error code in this situation
that I could think of.

Not all callers test the return value of irq_set_irq_wake(), but those
that do take != 0 to mean error as far as I can see, so they should be
fine. I guess those that don't test actually should, but that's a
different issue.

Signed-off-by: Jesper Juhl 
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1106092300360.17868@swampdragon.chaosbits.net
Signed-off-by: Thomas Gleixner

genirq: Ensure we locate the passed IRQ in irq_alloc_descs()

2011-06-03T12:53:16+00:00

When irq_alloc_descs() is called with no base IRQ specified then it will
search for a range of IRQs starting from a specified base address. In the
case where an IRQ is specified it still does this search in order to ensure
that none of the requested range is already allocated and it still uses the
from parameter to specify the base for the search. This means that in the
case where a base is specified but from is zero (which is reasonable as
any IRQ number is in the range specified by a zero from) the function will
get confused and try to allocate the first suitably sized block of free IRQs
it finds.

Instead use a specified IRQ as the base address for the search, and insist
that any from that is specified can support that IRQ.

Signed-off-by: Mark Brown 
Link: http://lkml.kernel.org/r/1307037313-15733-1-git-send-email-broonie@opensource.wolfsonmicro.com
Signed-off-by: Thomas Gleixner

genirq: Fix descriptor init on non-sparse IRQs

2011-06-03T12:53:16+00:00

The genirq changes are initializing descriptors for sparse IRQs quite
differently from how non-sparse (stacked?) IRQs are initialized, with
the effect that on my platform all IRQs are default-disabled on sparse
IRQs and default-enabled if non-sparse IRQs are used, crashing some
GPIO driver.

Fix this by refactoring the non-sparse IRQs to use the same descriptor
init function as the sparse IRQs.

Signed-off: Linus Walleij 
Link: http://lkml.kernel.org/r/1306858479-16622-1-git-send-email-linus.walleij@stericsson.com
Cc: stable@kernel.org # 2.6.39
Signed-off-by: Thomas Gleixner