linux-toradex.git/kernel/irq, branch v3.10.78

genirq: Sanitize spurious interrupt detection of threaded irqs

2014-07-01T03:09:45+00:00

commit 1e77d0a1ed7417d2a5a52a7b8d32aea1833faa6c upstream.

Till reported that the spurious interrupt detection of threaded
interrupts is broken in two ways:

- note_interrupt() is called for each action thread of a shared
  interrupt line. That's wrong as we are only interested whether none
  of the device drivers felt responsible for the interrupt, but by
  calling multiple times for a single interrupt line we account
  IRQ_NONE even if one of the drivers felt responsible.

- note_interrupt() when called from the thread handler is not
  serialized. That leaves the members of irq_desc which are used for
  the spurious detection unprotected.

To solve this we need to defer the spurious detection of a threaded
interrupt to the next hardware interrupt context where we have
implicit serialization.

If note_interrupt is called with action_ret == IRQ_WAKE_THREAD, we
check whether the previous interrupt requested a deferred check. If
not, we request a deferred check for the next hardware interrupt and
return.

If set, we check whether one of the interrupt threads signaled
success. Depending on this information we feed the result into the
spurious detector.

If one primary handler of a shared interrupt returns IRQ_HANDLED we
disable the deferred check of irq threads on the same line, as we have
found at least one device driver who cared.

Reported-by: Till Straumann 
Signed-off-by: Thomas Gleixner 
Tested-by: Austin Schuh 
Cc: Oliver Hartkopp 
Cc: Wolfgang Grandegger 
Cc: Pavel Pisa 
Cc: Marc Kleine-Budde 
Cc: linux-can@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1303071450130.22263@ionos
Signed-off-by: Greg Kroah-Hartman

genirq: Allow forcing cpu affinity of interrupts

2014-06-07T20:25:29+00:00

commit 01f8fa4f01d8362358eb90e412bd7ae18a3ec1ad upstream.

The current implementation of irq_set_affinity() refuses rightfully to
route an interrupt to an offline cpu.

But there is a special case, where this is actually desired. Some of
the ARM SoCs have per cpu timers which require setting the affinity
during cpu startup where the cpu is not yet in the online mask.

If we can't do that, then the local timer interrupt for the about to
become online cpu is routed to some random online cpu.

The developers of the affected machines tried to work around that
issue, but that results in a massive mess in that timer code.

We have a yet unused argument in the set_affinity callbacks of the irq
chips, which I added back then for a similar reason. It was never
required so it got not used. But I'm happy that I never removed it.

That allows us to implement a sane handling of the above scenario. So
the affected SoC drivers can add the required force handling to their
interrupt chip, switch the timer code to irq_force_affinity() and
things just work.

This does not affect any existing user of irq_set_affinity().

Tagged for stable to allow a simple fix of the affected SoC clock
event drivers.

Reported-and-tested-by: Krzysztof Kozlowski 
Signed-off-by: Thomas Gleixner 
Cc: Kyungmin Park 
Cc: Marek Szyprowski 
Cc: Bartlomiej Zolnierkiewicz 
Cc: Tomasz Figa ,
Cc: Daniel Lezcano ,
Cc: Kukjin Kim 
Cc: linux-arm-kernel@lists.infradead.org,
Link: http://lkml.kernel.org/r/20140416143315.717251504@linutronix.de
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: Remove racy waitqueue_active check

2014-03-24T04:38:15+00:00

commit c685689fd24d310343ac33942e9a54a974ae9c43 upstream.

We hit one rare case below:

T1 calling disable_irq(), but hanging at synchronize_irq()
always;
The corresponding irq thread is in sleeping state;
And all CPUs are in idle state;

After analysis, we found there is one possible scenerio which
causes T1 is waiting there forever:
CPU0                                       CPU1
 synchronize_irq()
  wait_event()
    spin_lock()
                                           atomic_dec_and_test(&threads_active)
      insert the __wait into queue
    spin_unlock()
                                           if(waitqueue_active)
    atomic_read(&threads_active)
                                             wake_up()

Here after inserted the __wait into queue on CPU0, and before
test if queue is empty on CPU1, there is no barrier, it maybe
cause it is not visible for CPU1 immediately, although CPU0 has
updated the queue list.
It is similar for CPU0 atomic_read() threads_active also.

So we'd need one smp_mb() before waitqueue_active.that, but removing
the waitqueue_active() check solves it as wel l and it makes
things simple and clear.

Signed-off-by: Chuansheng Liu 
Cc: Xiaoming Wang 
Link: http://lkml.kernel.org/r/1393212590-32543-1-git-send-email-chuansheng.liu@intel.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n

2014-02-22T20:41:29+00:00

commit 2c45aada341121438affc4cb8d5b4cfaa2813d3d upstream.

In allmodconfig builds for sparc and any other arch which does
not set CONFIG_SPARSE_IRQ, the following will be seen at modpost:

  CC [M]  lib/cpu-notifier-error-inject.o
  CC [M]  lib/pm-notifier-error-inject.o
ERROR: "irq_to_desc" [drivers/gpio/gpio-mcp23s08.ko] undefined!
make[2]: *** [__modpost] Error 1

This happens because commit 3911ff30f5 ("genirq: export
handle_edge_irq() and irq_to_desc()") added one export for it, but
there were actually two instances of it, in an if/else clause for
CONFIG_SPARSE_IRQ.  Add the second one.

Signed-off-by: Paul Gortmaker 
Cc: Jiri Kosina 
Link: http://lkml.kernel.org/r/1392057610-11514-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

irq: Enable all irqs unconditionally in irq_resume

2013-12-12T06:36:27+00:00

commit ac01810c9d2814238f08a227062e66a35a0e1ea2 upstream.

When the system enters suspend, it disables all interrupts in
suspend_device_irqs(), including the interrupts marked EARLY_RESUME.

On the resume side things are different. The EARLY_RESUME interrupts
are reenabled in sys_core_ops->resume and the non EARLY_RESUME
interrupts are reenabled in the normal system resume path.

When suspend_noirq() failed or suspend is aborted for any other
reason, we might omit the resume side call to sys_core_ops->resume()
and therefor the interrupts marked EARLY_RESUME are not reenabled and
stay disabled forever.

To solve this, enable all irqs unconditionally in irq_resume()
regardless whether interrupts marked EARLY_RESUMEhave been already
enabled or not.

This might try to reenable already enabled interrupts in the non
failure case, but the only affected platform is XEN and it has been
confirmed that it does not cause any side effects.

[ tglx: Massaged changelog. ]

Signed-off-by: Laxman Dewangan 
Acked-by-and-tested-by: Konrad Rzeszutek Wilk 
Acked-by: Heiko Stuebner 
Reviewed-by: Pavel Machek 
Cc: 
Cc: 
Cc: 
Cc: 
Link: http://lkml.kernel.org/r/1385388587-16442-1-git-send-email-ldewangan@nvidia.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: Fix can_request_irq() for IRQs without an action

2013-07-22T01:21:27+00:00

commit 2779db8d37d4b542d9ca2575f5f178dbeaca6c86 upstream.

Commit 02725e7471b8 ('genirq: Use irq_get/put functions'),
inadvertently changed can_request_irq() to return 0 for IRQs that have
no action.  This causes pcibios_lookup_irq() to select only IRQs that
already have an action with IRQF_SHARED set, or to fail if there are
none.  Change can_request_irq() to return 1 for IRQs that have no
action (if the first two conditions are met).

Reported-by: Bjarni Ingi Gislason 
Tested-by: Bjarni Ingi Gislason  (against 3.2)
Signed-off-by: Ben Hutchings 
Cc: 709647@bugs.debian.org
Link: http://bugs.debian.org/709647
Link: http://lkml.kernel.org/r/1372383630.23847.40.camel@deadeye.wl.decadent.org.uk
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

irqdomain: document the simple domain first_irq

2013-06-08T20:15:09+00:00

The first_irq needs to be zero to get a linear domain and that
comes with special semantics. We want to simplify this going
forward but some documentation never hurts.

Signed-off-by: Linus Walleij 
Signed-off-by: Grant Likely

kernel/irq/irqdomain.c: before use 'irq_data', need check it whether valid.

2013-06-08T20:15:09+00:00

Since irq_data may be NULL, if so, we WARN_ON(), and continue, 'hwirq'
which related with 'irq_data' has to initialize later, or it will cause
issue.

Signed-off-by: Chen Gang 
Signed-off-by: Grant Likely

irqdomain: export irq_domain_add_simple

2013-06-08T20:15:08+00:00

All other irq_domain_add_* functions are exported already, and apparently
this one got left out by mistake, which causes build errors for ARM
allmodconfig kernels:

ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-rcar.ko] undefined!
ERROR: "irq_domain_add_simple" [drivers/gpio/gpio-em.ko] undefined!

Signed-off-by: Arnd Bergmann 
Acked-by: Simon Horman 
Signed-off-by: Grant Likely

irqdomain: Allow quiet failure mode

2013-05-06T01:37:43+00:00

Some interrupt controllers refuse to map interrupts marked as
"protected" by firwmare. Since we try to map everyting in the
device-tree on some platforms, we end up with a lot of nasty
WARN's in the boot log for what is a normal situation on those
machines.

This defines a specific return code (-EPERM) from the host map()
callback which cause irqdomain to fail silently.

MPIC is updated to return this when hitting a protected source
printing only a single line message for diagnostic purposes.

Signed-off-by: Benjamin Herrenschmidt