linux-toradex.git/kernel/irq, branch v3.12.29

genirq: Sanitize spurious interrupt detection of threaded irqs

2014-07-02T10:06:34+00:00

commit 1e77d0a1ed7417d2a5a52a7b8d32aea1833faa6c upstream.

Till reported that the spurious interrupt detection of threaded
interrupts is broken in two ways:

- note_interrupt() is called for each action thread of a shared
  interrupt line. That's wrong as we are only interested whether none
  of the device drivers felt responsible for the interrupt, but by
  calling multiple times for a single interrupt line we account
  IRQ_NONE even if one of the drivers felt responsible.

- note_interrupt() when called from the thread handler is not
  serialized. That leaves the members of irq_desc which are used for
  the spurious detection unprotected.

To solve this we need to defer the spurious detection of a threaded
interrupt to the next hardware interrupt context where we have
implicit serialization.

If note_interrupt is called with action_ret == IRQ_WAKE_THREAD, we
check whether the previous interrupt requested a deferred check. If
not, we request a deferred check for the next hardware interrupt and
return.

If set, we check whether one of the interrupt threads signaled
success. Depending on this information we feed the result into the
spurious detector.

If one primary handler of a shared interrupt returns IRQ_HANDLED we
disable the deferred check of irq threads on the same line, as we have
found at least one device driver who cared.

Reported-by: Till Straumann 
Signed-off-by: Thomas Gleixner 
Tested-by: Austin Schuh 
Cc: Oliver Hartkopp 
Cc: Wolfgang Grandegger 
Cc: Pavel Pisa 
Cc: Marc Kleine-Budde 
Cc: linux-can@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1303071450130.22263@ionos
Signed-off-by: Jiri Slaby

genirq: Allow forcing cpu affinity of interrupts

2014-06-06T09:40:20+00:00

commit 01f8fa4f01d8362358eb90e412bd7ae18a3ec1ad upstream.

The current implementation of irq_set_affinity() refuses rightfully to
route an interrupt to an offline cpu.

But there is a special case, where this is actually desired. Some of
the ARM SoCs have per cpu timers which require setting the affinity
during cpu startup where the cpu is not yet in the online mask.

If we can't do that, then the local timer interrupt for the about to
become online cpu is routed to some random online cpu.

The developers of the affected machines tried to work around that
issue, but that results in a massive mess in that timer code.

We have a yet unused argument in the set_affinity callbacks of the irq
chips, which I added back then for a similar reason. It was never
required so it got not used. But I'm happy that I never removed it.

That allows us to implement a sane handling of the above scenario. So
the affected SoC drivers can add the required force handling to their
interrupt chip, switch the timer code to irq_force_affinity() and
things just work.

This does not affect any existing user of irq_set_affinity().

Tagged for stable to allow a simple fix of the affected SoC clock
event drivers.

Reported-and-tested-by: Krzysztof Kozlowski 
Signed-off-by: Thomas Gleixner 
Cc: Kyungmin Park 
Cc: Marek Szyprowski 
Cc: Bartlomiej Zolnierkiewicz 
Cc: Tomasz Figa ,
Cc: Daniel Lezcano ,
Cc: Kukjin Kim 
Cc: linux-arm-kernel@lists.infradead.org,
Link: http://lkml.kernel.org/r/20140416143315.717251504@linutronix.de
Signed-off-by: Thomas Gleixner 
Signed-off-by: Jiri Slaby

genirq: Remove racy waitqueue_active check

2014-03-22T21:01:55+00:00

commit c685689fd24d310343ac33942e9a54a974ae9c43 upstream.

We hit one rare case below:

T1 calling disable_irq(), but hanging at synchronize_irq()
always;
The corresponding irq thread is in sleeping state;
And all CPUs are in idle state;

After analysis, we found there is one possible scenerio which
causes T1 is waiting there forever:
CPU0                                       CPU1
 synchronize_irq()
  wait_event()
    spin_lock()
                                           atomic_dec_and_test(&threads_active)
      insert the __wait into queue
    spin_unlock()
                                           if(waitqueue_active)
    atomic_read(&threads_active)
                                             wake_up()

Here after inserted the __wait into queue on CPU0, and before
test if queue is empty on CPU1, there is no barrier, it maybe
cause it is not visible for CPU1 immediately, although CPU0 has
updated the queue list.
It is similar for CPU0 atomic_read() threads_active also.

So we'd need one smp_mb() before waitqueue_active.that, but removing
the waitqueue_active() check solves it as wel l and it makes
things simple and clear.

Signed-off-by: Chuansheng Liu 
Cc: Xiaoming Wang 
Link: http://lkml.kernel.org/r/1393212590-32543-1-git-send-email-chuansheng.liu@intel.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Jiri Slaby

genirq: Add missing irq_to_desc export for CONFIG_SPARSE_IRQ=n

2014-02-22T21:32:29+00:00

commit 2c45aada341121438affc4cb8d5b4cfaa2813d3d upstream.

In allmodconfig builds for sparc and any other arch which does
not set CONFIG_SPARSE_IRQ, the following will be seen at modpost:

  CC [M]  lib/cpu-notifier-error-inject.o
  CC [M]  lib/pm-notifier-error-inject.o
ERROR: "irq_to_desc" [drivers/gpio/gpio-mcp23s08.ko] undefined!
make[2]: *** [__modpost] Error 1

This happens because commit 3911ff30f5 ("genirq: export
handle_edge_irq() and irq_to_desc()") added one export for it, but
there were actually two instances of it, in an if/else clause for
CONFIG_SPARSE_IRQ.  Add the second one.

Signed-off-by: Paul Gortmaker 
Cc: Jiri Kosina 
Link: http://lkml.kernel.org/r/1392057610-11514-1-git-send-email-paul.gortmaker@windriver.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: Generic irq chip requires IRQ_DOMAIN

2014-02-20T19:08:02+00:00

commit 923fa4ea382f592dee2ba3b205befb90cbddf3af upstream.

The generic_chip.c uses interfaces from irq_domain.c which is
controlled by the IRQ_DOMAIN config option, but there is no Kconfig
dependency so the build can fail:

linux/kernel/irq/generic-chip.c:400:11: error:
'irq_domain_xlate_onetwocell' undeclared here (not in a function)

Select IRQ_DOMAIN when GENERIC_IRQ_CHIP is selected.

Signed-off-by: Nitin A Kamble 
Link: http://lkml.kernel.org/r/1391129410-54548-2-git-send-email-nitin.a.kamble@intel.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

irq: Enable all irqs unconditionally in irq_resume

2013-12-12T06:37:54+00:00

commit ac01810c9d2814238f08a227062e66a35a0e1ea2 upstream.

When the system enters suspend, it disables all interrupts in
suspend_device_irqs(), including the interrupts marked EARLY_RESUME.

On the resume side things are different. The EARLY_RESUME interrupts
are reenabled in sys_core_ops->resume and the non EARLY_RESUME
interrupts are reenabled in the normal system resume path.

When suspend_noirq() failed or suspend is aborted for any other
reason, we might omit the resume side call to sys_core_ops->resume()
and therefor the interrupts marked EARLY_RESUME are not reenabled and
stay disabled forever.

To solve this, enable all irqs unconditionally in irq_resume()
regardless whether interrupts marked EARLY_RESUMEhave been already
enabled or not.

This might try to reenable already enabled interrupts in the non
failure case, but the only affected platform is XEN and it has been
confirmed that it does not cause any side effects.

[ tglx: Massaged changelog. ]

Signed-off-by: Laxman Dewangan 
Acked-by-and-tested-by: Konrad Rzeszutek Wilk 
Acked-by: Heiko Stuebner 
Reviewed-by: Pavel Machek 
Cc: 
Cc: 
Cc: 
Cc: 
Link: http://lkml.kernel.org/r/1385388587-16442-1-git-send-email-ldewangan@nvidia.com
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

genirq: Set the irq thread policy without checking CAP_SYS_NICE

2013-12-04T19:05:09+00:00

commit bbfe65c219c638e19f1da5adab1005b2d68ca810 upstream.

In commit ee23871389 ("genirq: Set irq thread to RT priority on
creation") we moved the assigment of the thread's priority from the
thread's function into __setup_irq(). That function may run in user
context for instance if the user opens an UART node and then driver
calls requests in the ->open() callback. That user may not have
CAP_SYS_NICE and so the irq thread won't run with the SCHED_OTHER
policy.

This patch uses sched_setscheduler_nocheck() so we omit the CAP_SYS_NICE
check which is otherwise required for the SCHED_OTHER policy.

[bigeasy: Rewrite the changelog]

Signed-off-by: Thomas Pfaff 
Cc: Ivo Sieben 
Link: http://lkml.kernel.org/r/1381489240-29626-1-git-send-email-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

Remove GENERIC_HARDIRQ config option

2013-09-13T13:09:52+00:00

After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky

Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2013-07-13T22:37:30+00:00

Pull irq updates from Thomas Gleixner:
 - core fix for missing round up in the generic irq chip implementation
 - new irq chip for MOXA SoCs
 - a few fixes and cleanups in the irqchip drivers

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Add support for MOXA ART SoCs
  genirq: generic chip: Use DIV_ROUND_UP to calculate numchips
  irqchip: nvic: Fix wrong num_ct argument for irq_alloc_domain_generic_chips()
  irqchip: sun4i: Staticize sun4i_irq_ack()
  irqchip: vt8500: Staticize local symbols

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2013-07-13T21:52:21+00:00

Pull MIPS updates from Ralf Baechle:
 "MIPS updates:

   - All the things that didn't make 3.10.
   - Removes the Windriver PPMC platform.  Nobody will miss it.
   - Remove a workaround from kernel/irq/irqdomain.c which was there
     exclusivly for MIPS.  Patch by Grant Likely.
   - More small improvments for the SEAD 3 platform
   - Improvments on the BMIPS / SMP support for the BCM63xx series.
   - Various cleanups of dead leftovers.
   - Platform support for the Cavium Octeon-based EdgeRouter Lite.

  Two large KVM patchsets didn't make it for this pull request because
  their respective authors are vacationing"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits)
  MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER
  MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions
  MIPS: SEAD3: Disable L2 cache on SEAD-3.
  MIPS: BCM63xx: Enable second core SMP on BCM6328 if available
  MIPS: BCM63xx: Add SMP support to prom.c
  MIPS: define write{b,w,l,q}_relaxed
  MIPS: Expose missing pci_io{map,unmap} declarations
  MIPS: Malta: Update GCMP detection.
  Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"
  MIPS: APSP: Remove 
  SSB: Kconfig: Amend SSB_EMBEDDED dependencies
  MIPS: microMIPS: Fix improper definition of ISA exception bit.
  MIPS: Don't try to decode microMIPS branch instructions where they cannot exist.
  MIPS: Declare emulate_load_store_microMIPS as a static function.
  MIPS: Fix typos and cleanup comment
  MIPS: Cleanup indentation and whitespace
  MIPS: BMIPS: support booting from physical CPU other than 0
  MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS
  MIPS: GIC: Fix gic_set_affinity infinite loop
  MIPS: Don't save/restore OCTEON wide multiplier state on syscalls.
  ...