linux-toradex.git/kernel/irq, branch v6.17-rc6 Linux kernel for Apalis and Colibri modules genirq/test: Resolve irq lock inversion warnings 2025-08-06T08:29:48+00:00 Brian Norris briannorris@chromium.org 2025-08-05T18:32:20+00:00 5b65258229117995eb6c4bd74995e15fb5f2cfe3 irq_shutdown_and_deactivate() is normally called with the descriptor lock held, and interrupts disabled. Nested a few levels down, it grabs the global irq_resend_lock. Lockdep rightfully complains when interrupts are not disabled: CPU0 CPU1 ---- ---- lock(irq_resend_lock); local_irq_disable(); lock(&irq_desc_lock_class); lock(irq_resend_lock); <Interrupt> lock(&irq_desc_lock_class); ... _raw_spin_lock+0x2b/0x40 clear_irq_resend+0x14/0x70 irq_shutdown_and_deactivate+0x29/0x80 irq_shutdown_depth_test+0x1ce/0x600 kunit_try_run_case+0x90/0x120 Grab the descriptor lock and disable interrupts, to resolve the problem. Fixes: 66067c3c8a1e ("genirq: Add kunit tests for depth counts") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/all/aJJONEIoIiTSDMqc@google.com Closes: https://lore.kernel.org/lkml/31a761e4-8f81-40cf-aaf5-d220ba11911c@roeck-us.net/ 
irq_shutdown_and_deactivate() is normally called with the descriptor lock
held, and interrupts disabled. Nested a few levels down, it grabs the
global irq_resend_lock. Lockdep rightfully complains when interrupts are
not disabled:

       CPU0                    CPU1
       ----                    ----
  lock(irq_resend_lock);
                               local_irq_disable();
                               lock(&irq_desc_lock_class);
                               lock(irq_resend_lock);
  <Interrupt>
    lock(&irq_desc_lock_class);

...
   _raw_spin_lock+0x2b/0x40
   clear_irq_resend+0x14/0x70
   irq_shutdown_and_deactivate+0x29/0x80
   irq_shutdown_depth_test+0x1ce/0x600
   kunit_try_run_case+0x90/0x120

Grab the descriptor lock and disable interrupts, to resolve the
problem.

Fixes: 66067c3c8a1e ("genirq: Add kunit tests for depth counts")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/all/aJJONEIoIiTSDMqc@google.com
Closes: https://lore.kernel.org/lkml/31a761e4-8f81-40cf-aaf5-d220ba11911c@roeck-us.net/
Merge tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci 2025-08-01T20:59:07+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-08-01T20:59:07+00:00 0bd0a41a5120f78685a132834865b0a631b9026a Pull PCI updates from Bjorn Helgaas: "Enumeration: - Allow built-in drivers, not just modular drivers, to use async initial probing (Lukas Wunner) - Support Immediate Readiness even on devices with no PM Capability (Sean Christopherson) - Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the required delay between a reset and sending config requests to a device (Niklas Cassel) - Add pci_is_display() to check for "Display" base class and use it in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello) - Allow 'isolated PCI functions' (multi-function devices without a function 0) for LoongArch, similar to s390 and jailhouse (Huacai Chen) Power control: - Add ability to enable optional slot clock for cases where the PCIe host controller and the slot are supplied by different clocks (Marek Vasut) PCIe native device hotplug: - Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by misinterpreting a config read failure after a device has been removed (Lukas Wunner) - Avoid creating a useless PCIe port service device for pciehp if the slot is handled by the ACPI hotplug driver (Lukas Wunner) - Ignore ACPI hotplug slots when calculating depth of pciehp hotplug ports (Lukas Wunner) Virtualization: - Save VF resizable BAR state and restore it after reset (Michał Winiarski) - Allow IOV resources (VF BARs) to be resized (Michał Winiarski) - Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size (Michał Winiarski) Endpoint framework: - Add RC-to-EP doorbell support using platform MSI controller, including a test case (Frank Li) - Allow BAR assignment via configfs so platforms have flexibility in determining BAR usage (Jerome Brunet) Native PCIe controller drivers: - Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie, axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to DT schema format (Rob Herring) - Use dev_fwnode() instead of of_fwnode_handle() to remove OF dependency in altera (fixes an unused variable), designware-host, mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma, xilinx-nwl (Jiri Slaby, Arnd Bergmann) - Convert aardvark, altera, brcmstb, designware-host, iproc, mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx, xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to using msi_create_parent_irq_domain() instead; this makes the interrupt controller per-PCI device, allows dynamic allocation of vectors after initialization, and allows support of IMS (Nam Cao) APM X-Gene PCIe controller driver: - Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug bits, use device-managed memory allocations, and clean things up (Marc Zyngier) - Probe xgene-msi as a standard platform driver rather than a subsys_initcall (Marc Zyngier) Broadcom STB PCIe controller driver: - Add optional DT 'num-lanes' property and if present, use it to override the Maximum Link Width advertised in Link Capabilities (Jim Quinlan) Cadence PCIe controller driver: - Use PCIe Message routing types from the PCI core rather than defining private ones (Hans Zhang) Freescale i.MX6 PCIe controller driver: - Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu) - Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features (Richard Zhu) - Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can trigger doorbel on Endpoint (Frank Li) - Remove apps_reset (LTSSM_EN) from imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug regression on i.MX8MM (Richard Zhu) - Delay Endpoint link start until configfs 'start' written (Richard Zhu) Intel VMD host bridge driver: - Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo) Qualcomm PCIe controller driver: - Add DT binding and driver support for SA8255p, which supports ECAM for Configuration Space access (Mayank Rana) - Update DT binding and driver to describe PHYs and per-Root Port resets in a Root Port stanza and deprecate describing them in the host bridge; this makes it possible to support multiple Root Ports in the future (Krishna Chaitanya Chundru) - Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang) - Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang) - Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT bindings (Konrad Dybcio) - Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue Zhang) - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ (Niklas Cassel) Rockchip PCIe controller driver: - Drop unused PCIe Message routing and code definitions (Hans Zhang) - Remove several unused header includes (Hans Zhang) - Use standard PCIe config register definitions instead of rockchip-specific redefinitions (Geraldo Nascimento) - Set Target Link Speed to 5.0 GT/s before retraining so we have a chance to train at a higher speed (Geraldo Nascimento) Rockchip DesignWare PCIe controller driver: - Prevent race between link training and register update via DBI by inhibiting link training after hot reset and link down (Wilfred Mallawa) - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ (Niklas Cassel) Sophgo PCIe controller driver: - Add DT binding and driver for Sophgo SG2044 PCIe controller driver in Root Complex mode (Inochi Amaoto) Synopsys DesignWare PCIe controller driver: - Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on Ports that support > 5.0 GT/s. Slower Ports still rely on the not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while waiting for the Link (Niklas Cassel)" * tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits) dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset dt-bindings: PCI: Remove 83xx-512x-pci.txt dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema dt-bindings: PCI: Convert apm,xgene-pcie to DT schema dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema dt-bindings: PCI: Convert st,spear1340-pcie to DT schema PCI: Move is_pciehp check out of pciehp_is_native() PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports selftests: pci_endpoint: Add doorbell test case misc: pci_endpoint_test: Add doorbell test case PCI: endpoint: pci-epf-test: Add doorbell test support PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode PCI: vmd: Switch to msi_create_parent_irq_domain() PCI: vmd: Convert to lock guards ... 
Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Allow built-in drivers, not just modular drivers, to use async
     initial probing (Lukas Wunner)

   - Support Immediate Readiness even on devices with no PM Capability
     (Sean Christopherson)

   - Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
     required delay between a reset and sending config requests to a
     device (Niklas Cassel)

   - Add pci_is_display() to check for "Display" base class and use it
     in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)

   - Allow 'isolated PCI functions' (multi-function devices without a
     function 0) for LoongArch, similar to s390 and jailhouse (Huacai
     Chen)

  Power control:

   - Add ability to enable optional slot clock for cases where the PCIe
     host controller and the slot are supplied by different clocks
     (Marek Vasut)

  PCIe native device hotplug:

   - Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
     misinterpreting a config read failure after a device has been
     removed (Lukas Wunner)

   - Avoid creating a useless PCIe port service device for pciehp if the
     slot is handled by the ACPI hotplug driver (Lukas Wunner)

   - Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
     ports (Lukas Wunner)

  Virtualization:

   - Save VF resizable BAR state and restore it after reset (Michał
     Winiarski)

   - Allow IOV resources (VF BARs) to be resized (Michał Winiarski)

   - Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
     (Michał Winiarski)

  Endpoint framework:

   - Add RC-to-EP doorbell support using platform MSI controller,
     including a test case (Frank Li)

   - Allow BAR assignment via configfs so platforms have flexibility in
     determining BAR usage (Jerome Brunet)

  Native PCIe controller drivers:

   - Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
     axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
     DT schema format (Rob Herring)

   - Use dev_fwnode() instead of of_fwnode_handle() to remove OF
     dependency in altera (fixes an unused variable), designware-host,
     mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
     xilinx-nwl (Jiri Slaby, Arnd Bergmann)

   - Convert aardvark, altera, brcmstb, designware-host, iproc,
     mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
     xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
     using msi_create_parent_irq_domain() instead; this makes the
     interrupt controller per-PCI device, allows dynamic allocation of
     vectors after initialization, and allows support of IMS (Nam Cao)

  APM X-Gene PCIe controller driver:

   - Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
     bits, use device-managed memory allocations, and clean things up
     (Marc Zyngier)

   - Probe xgene-msi as a standard platform driver rather than a
     subsys_initcall (Marc Zyngier)

  Broadcom STB PCIe controller driver:

   - Add optional DT 'num-lanes' property and if present, use it to
     override the Maximum Link Width advertised in Link Capabilities
     (Jim Quinlan)

  Cadence PCIe controller driver:

   - Use PCIe Message routing types from the PCI core rather than
     defining private ones (Hans Zhang)

  Freescale i.MX6 PCIe controller driver:

   - Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)

   - Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
     (Richard Zhu)

   - Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
     trigger doorbel on Endpoint (Frank Li)

   - Remove apps_reset (LTSSM_EN) from
     imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
     regression on i.MX8MM (Richard Zhu)

   - Delay Endpoint link start until configfs 'start' written (Richard
     Zhu)

  Intel VMD host bridge driver:

   - Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)

  Qualcomm PCIe controller driver:

   - Add DT binding and driver support for SA8255p, which supports ECAM
     for Configuration Space access (Mayank Rana)

   - Update DT binding and driver to describe PHYs and per-Root Port
     resets in a Root Port stanza and deprecate describing them in the
     host bridge; this makes it possible to support multiple Root Ports
     in the future (Krishna Chaitanya Chundru)

   - Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)

   - Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)

   - Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
     bindings (Konrad Dybcio)

   - Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
     Zhang)

   - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
     (Niklas Cassel)

  Rockchip PCIe controller driver:

   - Drop unused PCIe Message routing and code definitions (Hans Zhang)

   - Remove several unused header includes (Hans Zhang)

   - Use standard PCIe config register definitions instead of
     rockchip-specific redefinitions (Geraldo Nascimento)

   - Set Target Link Speed to 5.0 GT/s before retraining so we have a
     chance to train at a higher speed (Geraldo Nascimento)

  Rockchip DesignWare PCIe controller driver:

   - Prevent race between link training and register update via DBI by
     inhibiting link training after hot reset and link down (Wilfred
     Mallawa)

   - Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
     (Niklas Cassel)

  Sophgo PCIe controller driver:

   - Add DT binding and driver for Sophgo SG2044 PCIe controller driver
     in Root Complex mode (Inochi Amaoto)

  Synopsys DesignWare PCIe controller driver:

   - Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
     Ports that support > 5.0 GT/s. Slower Ports still rely on the
     not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
     waiting for the Link (Niklas Cassel)"

* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
  dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
  dt-bindings: PCI: Remove 83xx-512x-pci.txt
  dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
  dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
  dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
  dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
  dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
  PCI: Move is_pciehp check out of pciehp_is_native()
  PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
  PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
  PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
  selftests: pci_endpoint: Add doorbell test case
  misc: pci_endpoint_test: Add doorbell test case
  PCI: endpoint: pci-epf-test: Add doorbell test support
  PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
  PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
  PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
  PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
  PCI: vmd: Switch to msi_create_parent_irq_domain()
  PCI: vmd: Convert to lock guards
  ...
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next 2025-07-30T15:58:55+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-30T15:58:55+00:00 8be4d31cb8aaeea27bde4b7ddb26e28a89062ebf Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ... 
Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...
Merge tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2025-07-29T20:26:05+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-29T20:26:05+00:00 0b29600a304c0c5da17ce1a7fab7cafb0eaf71f5 Pull interrupt chip driver updates from Thomas Gleixner: - Add support of forced affinity setting to yet offline CPUs for the MIPS-GIC to ensure that the affinity of per CPU interrupts can be set during the early bringup phase of a secondary CPU in the hotplug code before the CPU is set online and interrupts are enabled - Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI interrupt chip - Make the interrupt routing to RISV-V harts specification compliant so it supports arbitrary hart indices - Add a command line parameter and related handling to disable the generic RISCV IMSIC mechanism on platforms which use a trap-emulated IMSIC. Unfortunatly this is required because there is no mechanism available to discover this programatically. - Enable wakeup sources on the Renesas RZV2H driver - Convert interrupt chip drivers, which use a open coded variant of msi_create_parent_irq_domain() to use the new functionality - Convert interrupt chip drivers, which use the old style two level implementation of MSI support over to the MSI parent mechanism to prepare for removing at least one of the three PCI/MSI backend variants. - The usual cleanups and improvements all over the place * tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) irqchip/renesas-irqc: Convert to DEFINE_SIMPLE_DEV_PM_OPS() irqchip/renesas-intc-irqpin: Convert to DEFINE_SIMPLE_DEV_PM_OPS() irqchip/riscv-imsic: Add kernel parameter to disable IPIs irqchip/gic-v3: Fix GICD_CTLR register naming irqchip/ls-scfg-msi: Fix NULL dereference in error handling irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain() irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain() irqchip/alpine-msi: Switch to msi_create_parent_irq_domain() irqchip/alpine-msi: Convert to __free irqchip/alpine-msi: Convert to lock guards irqchip/alpine-msi: Clean up whitespace style irqchip/sg2042-msi: Switch to msi_create_parent_irq_domain() irqchip/loongson-pch-msi.c: Switch to msi_create_parent_irq_domain() irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper irqchip/bcm2712-mip: Switch to msi_create_parent_irq_domain() irqdomain: Add device pointer to irq_domain_info and msi_domain_info irqchip/renesas-rzv2h: Remove unneeded includes irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND irqchip/aslint-sswi: Resolve hart index ... 
Pull interrupt chip driver updates from Thomas Gleixner:

 - Add support of forced affinity setting to yet offline CPUs for the
   MIPS-GIC to ensure that the affinity of per CPU interrupts can be set
   during the early bringup phase of a secondary CPU in the hotplug code
   before the CPU is set online and interrupts are enabled

 - Add support for the MIPS (RISC-V !?!?) P8700 SoC in the ACLINT_SSWI
   interrupt chip

 - Make the interrupt routing to RISV-V harts specification compliant so
   it supports arbitrary hart indices

 - Add a command line parameter and related handling to disable the
   generic RISCV IMSIC mechanism on platforms which use a trap-emulated
   IMSIC. Unfortunatly this is required because there is no mechanism
   available to discover this programatically.

 - Enable wakeup sources on the Renesas RZV2H driver

 - Convert interrupt chip drivers, which use a open coded variant of
   msi_create_parent_irq_domain() to use the new functionality

 - Convert interrupt chip drivers, which use the old style two level
   implementation of MSI support over to the MSI parent mechanism to
   prepare for removing at least one of the three PCI/MSI backend
   variants.

 - The usual cleanups and improvements all over the place

* tag 'irq-drivers-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  irqchip/renesas-irqc: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
  irqchip/renesas-intc-irqpin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
  irqchip/riscv-imsic: Add kernel parameter to disable IPIs
  irqchip/gic-v3: Fix GICD_CTLR register naming
  irqchip/ls-scfg-msi: Fix NULL dereference in error handling
  irqchip/ls-scfg-msi: Switch to use msi_create_parent_irq_domain()
  irqchip/armada-370-xp: Switch to msi_create_parent_irq_domain()
  irqchip/alpine-msi: Switch to msi_create_parent_irq_domain()
  irqchip/alpine-msi: Convert to __free
  irqchip/alpine-msi: Convert to lock guards
  irqchip/alpine-msi: Clean up whitespace style
  irqchip/sg2042-msi: Switch to msi_create_parent_irq_domain()
  irqchip/loongson-pch-msi.c: Switch to msi_create_parent_irq_domain()
  irqchip/imx-mu-msi: Convert to msi_create_parent_irq_domain() helper
  irqchip/riscv-imsic: Convert to msi_create_parent_irq_domain() helper
  irqchip/bcm2712-mip: Switch to msi_create_parent_irq_domain()
  irqdomain: Add device pointer to irq_domain_info and msi_domain_info
  irqchip/renesas-rzv2h: Remove unneeded includes
  irqchip/renesas-rzv2h: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
  irqchip/aslint-sswi: Resolve hart index
  ...
Merge tag 'irq-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2025-07-29T19:55:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-07-29T19:55:12+00:00 dba3ec9f2ad085f05528ccd36d6835b06b5370cd Pull irq updates from Thomas Gleixner: - Prevent a interrupt migration related live lock in handle_edge_irq() If the interrupt affinity is moved to a new target CPU and the interrupt is currently handled on the previous target CPU for edge type interrupts the handler might get stuck on the previous target for a long time, which causes both involved CPUs to waste cycles and eventually run into a soft-lockup situation. Solve this by checking whether the interrupt is redirected to a new target CPU and if the interrupt is handled on that new target CPU, busy wait for completion instead of masking it and sending the pending but which would cause the old CPU to re-run the handler and in the worst case repeating this excercise for a long time. This only works on architectures which use single CPU interrupt targets, but that's so far the only ones where this behaviour has been observed. - Add a kunit test for interrupt disable depth counts The nested interrupt disable depth has been an issue in the past especially vs. free_irq(), interrupt shutdown and CPU hotplug and their interactions. The test exercises the combinations of these scenarios and checks for correctness. * tag 'irq-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Prevent migration live lock in handle_edge_irq() genirq: Split up irq_pm_check_wakeup() genirq: Move irq_wait_for_poll() to call site genirq: Remove pointless local variable genirq: Add kunit tests for depth counts 
Pull irq updates from Thomas Gleixner:

 - Prevent a interrupt migration related live lock in handle_edge_irq()

   If the interrupt affinity is moved to a new target CPU and the
   interrupt is currently handled on the previous target CPU for edge
   type interrupts the handler might get stuck on the previous target
   for a long time, which causes both involved CPUs to waste cycles and
   eventually run into a soft-lockup situation.

   Solve this by checking whether the interrupt is redirected to a new
   target CPU and if the interrupt is handled on that new target CPU,
   busy wait for completion instead of masking it and sending the
   pending but which would cause the old CPU to re-run the handler and
   in the worst case repeating this excercise for a long time.

   This only works on architectures which use single CPU interrupt
   targets, but that's so far the only ones where this behaviour has
   been observed.

 - Add a kunit test for interrupt disable depth counts

   The nested interrupt disable depth has been an issue in the past
   especially vs. free_irq(), interrupt shutdown and CPU hotplug and
   their interactions. The test exercises the combinations of these
   scenarios and checks for correctness.

* tag 'irq-core-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Prevent migration live lock in handle_edge_irq()
  genirq: Split up irq_pm_check_wakeup()
  genirq: Move irq_wait_for_poll() to call site
  genirq: Remove pointless local variable
  genirq: Add kunit tests for depth counts
genirq: Teach handle_simple_irq() to resend an in-progress interrupt 2025-07-22T20:33:00+00:00 Marc Zyngier maz@kernel.org 2025-07-08T17:33:52+00:00 2c9e7f857400ffecf16c49bc6d98ac43d4129fef It appears that the defect outlined in 9c15eeb5362c4 ("genirq: Allow fasteoi handler to resend interrupts on concurrent handling") also affects some other less stellar MSI controllers, this time using the handle_simple_irq() flow. Teach this flow about irqd_needs_resend_when_in_progress(). Given the invasive nature of this workaround, only this flow is updated. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20250708173404.1278635-2-maz@kernel.org 
It appears that the defect outlined in 9c15eeb5362c4 ("genirq: Allow
fasteoi handler to resend interrupts on concurrent handling") also
affects some other less stellar MSI controllers, this time using
the handle_simple_irq() flow.

Teach this flow about irqd_needs_resend_when_in_progress(). Given
the invasive nature of this workaround, only this flow is updated.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20250708173404.1278635-2-maz@kernel.org
genirq: Prevent migration live lock in handle_edge_irq() 2025-07-22T12:30:42+00:00 Thomas Gleixner tglx@linutronix.de 2025-07-18T18:54:12+00:00 8d39d6ec4db5da9899993092227584a97c203fd3 Yicon reported and Liangyan debugged a live lock in handle_edge_irq() related to interrupt migration. If the interrupt affinity is moved to a new target CPU and the interrupt is currently handled on the previous target CPU for edge type interrupts the handler might get stuck on the previous target: CPU 0 (previous target) CPU 1 (new target) handle_edge_irq() repeat: handle_event() handle_edge_irq() if (INPROGESS) { set(PENDING); mask(); return; } if (PENDING) { clear(PENDING); unmask(); goto repeat; } The migration in software never completes and CPU0 continues to handle the pending events forever. This happens when the device raises interrupts with a high rate and always before handle_event() completes and before the CPU0 handler can clear INPROGRESS so that CPU1 sets the PENDING flag over and over. This has been observed in virtual machines. Prevent this by checking whether the CPU which observes the INPROGRESS flag is the new affinity target. If that's the case, do not set the PENDING flag and wait for the INPROGRESS flag to be cleared instead, so that the new interrupt is handled on the new target CPU and the previous CPU is released from the action. This is restricted to the edge type handler and only utilized on systems, which use single CPU targets for interrupt affinity. Reported-by: Yicong Shen <shenyicong.1023@bytedance.com> Reported-by: Liangyan <liangyan.peng@bytedance.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Liangyan <liangyan.peng@bytedance.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/all/20250701163558.2588435-1-liangyan.peng@bytedance.com Link: https://lore.kernel.org/all/20250718185312.076515034@linutronix.de 
Yicon reported and Liangyan debugged a live lock in handle_edge_irq()
related to interrupt migration.

If the interrupt affinity is moved to a new target CPU and the interrupt is
currently handled on the previous target CPU for edge type interrupts the
handler might get stuck on the previous target:

CPU 0 (previous target)		CPU 1 (new target)

  handle_edge_irq()
   repeat:
	handle_event()		handle_edge_irq()
			        if (INPROGESS) {
				  set(PENDING);
				  mask();
				  return;
				}
	if (PENDING) {
	  clear(PENDING);
	  unmask();
	  goto repeat;
	}

The migration in software never completes and CPU0 continues to handle the
pending events forever. This happens when the device raises interrupts with
a high rate and always before handle_event() completes and before the CPU0
handler can clear INPROGRESS so that CPU1 sets the PENDING flag over and
over. This has been observed in virtual machines.

Prevent this by checking whether the CPU which observes the INPROGRESS flag
is the new affinity target. If that's the case, do not set the PENDING flag
and wait for the INPROGRESS flag to be cleared instead, so that the new
interrupt is handled on the new target CPU and the previous CPU is released
from the action.

This is restricted to the edge type handler and only utilized on systems,
which use single CPU targets for interrupt affinity.

Reported-by: Yicong Shen <shenyicong.1023@bytedance.com>
Reported-by: Liangyan <liangyan.peng@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liangyan <liangyan.peng@bytedance.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20250701163558.2588435-1-liangyan.peng@bytedance.com
Link: https://lore.kernel.org/all/20250718185312.076515034@linutronix.de
genirq: Split up irq_pm_check_wakeup() 2025-07-22T12:30:42+00:00 Thomas Gleixner tglx@linutronix.de 2025-07-18T18:54:10+00:00 c609045abc778689ce42e8f5827a84179ace52c5 Let the calling code check for the IRQD_WAKEUP_ARMED flag to prepare for a live lock mitigation in the edge type handler. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Liangyan <liangyan.peng@bytedance.com> Link: https://lore.kernel.org/all/20250718185312.012392426@linutronix.de 
Let the calling code check for the IRQD_WAKEUP_ARMED flag to prepare for a
live lock mitigation in the edge type handler.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liangyan <liangyan.peng@bytedance.com>
Link: https://lore.kernel.org/all/20250718185312.012392426@linutronix.de
genirq: Move irq_wait_for_poll() to call site 2025-07-22T12:30:42+00:00 Thomas Gleixner tglx@linutronix.de 2025-07-18T18:54:08+00:00 4e879dedd571128ed5aa4d5989ec0a1938804d20 Move it to the call site so that the waiting for the INPROGRESS flag can be reused by an upcoming mitigation for a potential live lock in the edge type handler. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Liangyan <liangyan.peng@bytedance.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/all/20250718185311.948555026@linutronix.de 
Move it to the call site so that the waiting for the INPROGRESS flag can be
reused by an upcoming mitigation for a potential live lock in the edge type
handler.

No functional change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liangyan <liangyan.peng@bytedance.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20250718185311.948555026@linutronix.de
genirq: Remove pointless local variable 2025-07-22T12:30:42+00:00 Thomas Gleixner tglx@linutronix.de 2025-07-18T18:54:06+00:00 46958a7bac2d32fda43fd7cd1858aa414640fbd1 The variable is only used at one place, which can simply take the constant as function argument. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Liangyan <liangyan.peng@bytedance.com> Link: https://lore.kernel.org/all/20250718185311.884314473@linutronix.de 
The variable is only used at one place, which can simply take the constant
as function argument.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liangyan <liangyan.peng@bytedance.com>
Link: https://lore.kernel.org/all/20250718185311.884314473@linutronix.de