linux-toradex.git/kernel/kmod.c, branch v3.3.5

PM / Sleep: Mitigate race between the freezer and request_firmware()

2012-04-13T16:13:54+00:00

commit 247bc03742545fec2f79939a3b9f738392a0f7b4 upstream.

There is a race condition between the freezer and request_firmware()
such that if request_firmware() is run on one CPU and
freeze_processes() is run on another CPU and usermodehelper_disable()
called by it succeeds to grab umhelper_sem for writing before
usermodehelper_read_trylock() called from request_firmware()
acquires it for reading, the request_firmware() will fail and
trigger a WARN_ON() complaining that it was called at a wrong time.
However, in fact, it wasn't called at a wrong time and
freeze_processes() simply happened to be executed simultaneously.

To avoid this race, at least in some cases, modify
usermodehelper_read_trylock() so that it doesn't fail if the
freezing of tasks has just started and hasn't been completed yet.
Instead, during the freezing of tasks, it will try to freeze the
task that has called it so that it can wait until user space is
thawed without triggering the scary warning.

For this purpose, change usermodehelper_disabled so that it can
take three different values, UMH_ENABLED (0), UMH_FREEZING and
UMH_DISABLED.  The first one means that usermode helpers are
enabled, the last one means "hard disable" (i.e. the system is not
ready for usermode helpers to be used) and the second one
is reserved for the freezer.  Namely, when freeze_processes() is
started, it sets usermodehelper_disabled to UMH_FREEZING which
tells usermodehelper_read_trylock() that it shouldn't fail just
yet and should call try_to_freeze() if woken up and cannot
return immediately.  This way all freezable tasks that happen
to call request_firmware() right before freeze_processes() is
started and lose the race for umhelper_sem with it will be
frozen and will sleep until thaw_processes() unsets
usermodehelper_disabled.  [For the non-freezable callers of
request_firmware() the race for umhelper_sem against
freeze_processes() is unfortunately unavoidable.]

Reported-by: Stephen Boyd 
Signed-off-by: Rafael J. Wysocki 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

firmware_class: Do not warn that system is not ready from async loads

2012-04-13T16:13:53+00:00

commit 9b78c1da60b3c62ccdd1509f0902ad19ceaf776b upstream.

If firmware is requested asynchronously, by calling
request_firmware_nowait(), there is no reason to fail the request
(and warn the user) when the system is (presumably temporarily)
unready to handle it (because user space is not available yet or
frozen).  For this reason, introduce an alternative routine for
read-locking umhelper_sem, usermodehelper_read_lock_wait(), that
will wait for usermodehelper_disabled to be unset (possibly with
a timeout) and make request_firmware_work_func() use it instead of
usermodehelper_read_trylock().

Accordingly, modify request_firmware() so that it uses
usermodehelper_read_trylock() to acquire umhelper_sem and remove
the code related to that lock from _request_firmware().

Signed-off-by: Rafael J. Wysocki 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

firmware_class: Rework usermodehelper check

2012-04-13T16:13:53+00:00

commit fe2e39d8782d885755139304d8dba0b3e5bfa878 upstream.

Instead of two functions, read_lock_usermodehelper() and
usermodehelper_is_disabled(), used in combination, introduce
usermodehelper_read_trylock() that will only return with umhelper_sem
held if usermodehelper_disabled is unset (and will return -EAGAIN
otherwise) and make _request_firmware() use it.

Rename read_unlock_usermodehelper() to
usermodehelper_read_unlock() to follow the naming convention of the
new function.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Greg Kroah-Hartman 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'pm-sleep' into pm-for-linus

2011-12-25T22:42:20+00:00

* pm-sleep: (51 commits)
  PM: Drop generic_subsys_pm_ops
  PM / Sleep: Remove forward-only callbacks from AMBA bus type
  PM / Sleep: Remove forward-only callbacks from platform bus type
  PM: Run the driver callback directly if the subsystem one is not there
  PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
  PM / Sleep: Merge internal functions in generic_ops.c
  PM / Sleep: Simplify generic system suspend callbacks
  PM / Hibernate: Remove deprecated hibernation snapshot ioctls
  PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
  PM / Sleep: Recommend [un]lock_system_sleep() over using pm_mutex directly
  PM / Sleep: Replace mutex_[un]lock(&pm_mutex) with [un]lock_system_sleep()
  PM / Sleep: Make [un]lock_system_sleep() generic
  PM / Sleep: Use the freezer_count() functions in [un]lock_system_sleep() APIs
  PM / Freezer: Remove the "userspace only" constraint from freezer[_do_not]_count()
  PM / Hibernate: Replace unintuitive 'if' condition in kernel/power/user.c with 'else'
  Freezer / sunrpc / NFS: don't allow TASK_KILLABLE sleeps to block the freezer
  PM / Sleep: Unify diagnostic messages from device suspend/resume
  ACPI / PM: Do not save/restore NVS on Asus K54C/K54HR
  PM / Hibernate: Remove deprecated hibernation test modes
  PM / Hibernate: Thaw processes in SNAPSHOT_CREATE_IMAGE ioctl test path
  ...

Conflicts:
	kernel/kmod.c

PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()

2011-12-09T22:36:36+00:00

Commit a144c6a (PM: Print a warning if firmware is requested when tasks
are frozen) introduced usermodehelper_is_disabled() to warn and exit
immediately if firmware is requested when usermodehelpers are disabled.

However, it is racy. Consider the following scenario, currently used in
drivers/base/firmware_class.c:

...
if (usermodehelper_is_disabled())
        goto out;

/* Do actual work */
...

out:
        return err;

Nothing prevents someone from disabling usermodehelpers just after the check
in the 'if' condition, which means that it is quite possible to try doing the
"actual work" with usermodehelpers disabled, leading to undesirable
consequences.

In particular, this race condition in _request_firmware() causes task freezing
failures whenever suspend/hibernation is in progress because, it wrongly waits
to get the firmware/microcode image from userspace when actually the
usermodehelpers are disabled or userspace has been frozen.
Some of the example scenarios that cause freezing failures due to this race
are those that depend on userspace via request_firmware(), such as x86
microcode module initialization and microcode image reload.

Previous discussions about this issue can be found at:
http://thread.gmane.org/gmane.linux.kernel/1198291/focus=1200591

This patch adds proper synchronization to fix this issue.

It is to be noted that this patchset fixes the freezing failures but doesn't
remove the warnings. IOW, it does not attempt to add explicit synchronization
to x86 microcode driver to avoid requesting microcode image at inopportune
moments. Because, the warnings were introduced to highlight such cases, in the
first place. And we need not silence the warnings, since we take care of the
*real* problem (freezing failure) and hence, after that, the warnings are
pretty harmless anyway.

Signed-off-by: Srivatsa S. Bhat 
Signed-off-by: Rafael J. Wysocki

PM / Usermodehelper: Cleanup remnants of usermodehelper_pm_callback()

2011-11-23T20:15:09+00:00

usermodehelper_pm_callback() no longer exists in the kernel. There are 2
comments in kernel/kmod.c that still refer to it.

Also, the patch that introduced usermodehelper_pm_callback(), #included
two header files:  and . But these are
no longer necessary.

This patch updates the comments as appropriate and removes the unnecessary
header file inclusions.

Signed-off-by: Srivatsa S. Bhat 
Signed-off-by: Rafael J. Wysocki

kmod: prevent kmod_loop_msg overflow in __request_module()

2011-10-26T02:40:39+00:00

Due to post-increment in condition of kmod_loop_msg in __request_module(),
the system log can be spammed by much more than 5 instances of the 'runaway
loop' message if the number of events triggering it makes the kmod_loop_msg
to overflow.

Fix that by making sure we never increment it past the threshold.

Signed-off-by: Jiri Kosina 
Signed-off-by: Rusty Russell 
CC: stable@kernel.org

Boot up with usermodehelper disabled

2011-08-04T08:03:29+00:00

The core device layer sends tons of uevent notifications for each device
it finds, and if the kernel has been built with a non-empty
CONFIG_UEVENT_HELPER_PATH that will make us try to execute the usermode
helper binary for all these events very early in the boot.

Not only won't the root filesystem even be mounted at that point, we
literally won't have necessarily even initialized all the process
handling data structures at that point, which causes no end of silly
problems even when the usermode helper doesn't actually succeed in
executing.

So just use our existing infrastructure to disable the usermodehelpers
to make the kernel start out with them disabled.  We enable them when
we've at least initialized stuff a bit.

Problems related to an uninitialized

	init_ipc_ns.ids[IPC_SHM_IDS].rw_mutex

reported by various people.

Reported-by: Manuel Lauss 
Reported-by: Richard Weinberger 
Reported-by: Marc Zyngier 
Acked-by: Kay Sievers 
Cc: Andrew Morton 
Cc: Vasiliy Kulikov 
Cc: Greg KH 
Signed-off-by: Linus Torvalds

KEYS/DNS: Fix ____call_usermodehelper() to not lose the session keyring

2011-06-17T16:40:48+00:00

____call_usermodehelper() now erases any credentials set by the
subprocess_inf::init() function.  The problem is that commit
17f60a7da150 ("capabilites: allow the application of capability limits
to usermode helpers") creates and commits new credentials with
prepare_kernel_cred() after the call to the init() function.  This wipes
all keyrings after umh_keys_init() is called.

The best way to deal with this is to put the init() call just prior to
the commit_creds() call, and pass the cred pointer to init().  That
means that umh_keys_init() and suchlike can modify the credentials
_before_ they are published and potentially in use by the rest of the
system.

This prevents request_key() from working as it is prevented from passing
the session keyring it set up with the authorisation token to
/sbin/request-key, and so the latter can't assume the authority to
instantiate the key.  This causes the in-kernel DNS resolver to fail
with ENOKEY unconditionally.

Signed-off-by: David Howells 
Acked-by: Eric Paris 
Tested-by: Jeff Layton 
Signed-off-by: Linus Torvalds

Merge branch 'next' into for-linus

2011-05-24T12:55:24+00:00