linux-toradex.git/kernel/locking/rwsem-xadd.c, branch v5.0

locking/rwsem: Fix (possible) missed wakeup

2019-01-21T10:15:39+00:00

Because wake_q_add() can imply an immediate wakeup (cmpxchg failure
case), we must not rely on the wakeup being delayed. However, commit:

  e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task")

relies on exactly that behaviour in that the wakeup must not happen
until after we clear waiter->task.

[ peterz: Added changelog. ]

Signed-off-by: Xie Yongji 
Signed-off-by: Zhang Yu 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Fixes: e38513905eea ("locking/rwsem: Rework zeroing reader waiter->task")
Link: https://lkml.kernel.org/r/1543495830-2644-1-git-send-email-xieyongji@baidu.com
Signed-off-by: Ingo Molnar

locking/rwsem: Make owner store task pointer of last owning reader

2018-09-10T10:04:07+00:00

Currently, when a reader acquires a lock, it only sets the
RWSEM_READER_OWNED bit in the owner field. The other bits are simply
not used. When debugging hanging cases involving rwsems and readers,
the owner value does not provide much useful information at all.

This patch modifies the current behavior to always store the task_struct
pointer of the last rwsem-acquiring reader in a reader-owned rwsem. This
may be useful in debugging rwsem hanging cases especially if only one
reader is involved. However, the task in the owner field may not the
real owner or one of the real owners at all when the owner value is
examined, for example, in a crash dump. So it is just an additional
hint about the past history.

If CONFIG_DEBUG_RWSEMS=y is enabled, the owner field will be checked at
unlock time too to make sure the task pointer value is valid. That does
have a slight performance cost and so is only enabled as part of that
debug option.

From the performance point of view, it is expected that the changes
shouldn't have any noticeable performance impact. A rwsem microbenchmark
(with 48 worker threads and 1:1 reader/writer ratio) was ran on a
2-socket 24-core 48-thread Haswell system.  The locking rates on a
4.19-rc1 based kernel were as follows:

  1) Unpatched kernel:				543.3 kops/s
  2) Patched kernel:				549.2 kops/s
  3) Patched kernel (CONFIG_DEBUG_RWSEMS on):	546.6 kops/s

There was actually a slight increase in performance (1.1%) in this
particular case. Maybe it was caused by the elimination of a branch or
just a testing noise. Turning on the CONFIG_DEBUG_RWSEMS option also
had less than the expected impact on performance.

The least significant 2 bits of the owner value are now used to designate
the rwsem is readers owned and the owners are anonymous.

Signed-off-by: Waiman Long 
Acked-by: Peter Zijlstra 
Cc: Davidlohr Bueso 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: Will Deacon 
Link: http://lkml.kernel.org/r/1536265114-10842-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar

locking/rwsem: Exit read lock slowpath if queue empty & no writer

2018-09-10T08:16:39+00:00

It was discovered that a constant stream of readers with occassional
writers pounding on a rwsem may cause many of the readers to enter the
slowpath unnecessarily thus increasing latency and lowering performance.

In the current code, a reader entering the slowpath critical section
will unconditionally set the WAITING_BIAS, if not set yet, and clear
its active count even if no one is in the wait queue and no writer
is present. This causes some incoming readers to observe the presence
of waiters in the wait queue and hence have to go into the slowpath
themselves.

With sufficient numbers of readers and a relatively short lock hold time,
the WAITING_BIAS may be repeatedly turned on and off and a substantial
portion of the readers will go into the slowpath sustaining a rather
long queue in the wait queue spinlock and repeated WAITING_BIAS on/off
cycle until the logjam is broken opportunistically.

To avoid this situation from happening, an additional check is added to
detect the special case that the reader in the critical section is the
only one in the wait queue and no writer is present. When that happens,
it can just exit the slowpath and return immediately as its active count
has already been set in the lock.  Other incoming readers won't observe
the presence of waiters and so will not be forced into the slowpath.

The issue was found in a customer site where they had an application
that pounded on the pread64 syscalls heavily on an XFS filesystem. The
application was run in a recent 4-socket boxes with a lot of CPUs. They
saw significant spinlock contention in the rwsem_down_read_failed() call.
With this patch applied, the system CPU usage went down from 85% to 57%,
and the spinlock contention in the pread64 syscalls was gone.

Signed-off-by: Waiman Long 
Signed-off-by: Peter Zijlstra (Intel) 
Reviewed-by: Davidlohr Bueso 
Acked-by: Will Deacon 
Cc: Joe Mario 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/1532459425-19204-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar

locking/rwsem: Simplify the is-owner-spinnable checks

2018-05-25T06:11:47+00:00

Add the trivial owner_on_cpu() helper for rwsem_can_spin_on_owner() and
rwsem_spin_on_owner(), it also allows to make rwsem_can_spin_on_owner()
a bit more clear.

Signed-off-by: Oleg Nesterov 
Signed-off-by: Peter Zijlstra (Intel) 
Acked-by: Waiman Long 
Cc: Amir Goldstein 
Cc: Davidlohr Bueso 
Cc: Jan Kara 
Cc: Linus Torvalds 
Cc: Matthew Wilcox 
Cc: Peter Zijlstra 
Cc: Theodore Y. Ts'o 
Cc: Thomas Gleixner 
Link: http://lkml.kernel.org/r/20180518165534.GA22348@redhat.com
Signed-off-by: Ingo Molnar

locking/percpu-rwsem: Annotate rwsem ownership transfer by setting RWSEM_OWNER_UNKNOWN

2018-05-16T09:45:16+00:00

The filesystem freezing code needs to transfer ownership of a rwsem
embedded in a percpu-rwsem from the task that does the freezing to
another one that does the thawing by calling percpu_rwsem_release()
after freezing and percpu_rwsem_acquire() before thawing.

However, the new rwsem debug code runs afoul with this scheme by warning
that the task that releases the rwsem isn't the one that acquires it,
as reported by Amir Goldstein:

  DEBUG_LOCKS_WARN_ON(sem->owner != get_current())
  WARNING: CPU: 1 PID: 1401 at /home/amir/build/src/linux/kernel/locking/rwsem.c:133 up_write+0x59/0x79

  Call Trace:
   percpu_up_write+0x1f/0x28
   thaw_super_locked+0xdf/0x120
   do_vfs_ioctl+0x270/0x5f1
   ksys_ioctl+0x52/0x71
   __x64_sys_ioctl+0x16/0x19
   do_syscall_64+0x5d/0x167
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

To work properly with the rwsem debug code, we need to annotate that the
rwsem ownership is unknown during the tranfer period until a brave soul
comes forward to acquire the ownership. During that period, optimistic
spinning will be disabled.

Reported-by: Amir Goldstein 
Tested-by: Amir Goldstein 
Signed-off-by: Waiman Long 
Acked-by: Peter Zijlstra 
Cc: Andrew Morton 
Cc: Davidlohr Bueso 
Cc: Jan Kara 
Cc: Linus Torvalds 
Cc: Matthew Wilcox 
Cc: Oleg Nesterov 
Cc: Paul E. McKenney 
Cc: Theodore Y. Ts'o 
Cc: Thomas Gleixner 
Cc: Will Deacon 
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-3-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar

locking/rwsem: Add a new RWSEM_ANONYMOUSLY_OWNED flag

2018-05-16T09:45:15+00:00

There are use cases where a rwsem can be acquired by one task, but
released by another task. In thess cases, optimistic spinning may need
to be disabled.  One example will be the filesystem freeze/thaw code
where the task that freezes the filesystem will acquire a write lock
on a rwsem and then un-owns it before returning to userspace. Later on,
another task will come along, acquire the ownership, thaw the filesystem
and release the rwsem.

Bit 0 of the owner field was used to designate that it is a reader
owned rwsem. It is now repurposed to mean that the owner of the rwsem
is not known. If only bit 0 is set, the rwsem is reader owned. If bit
0 and other bits are set, it is writer owned with an unknown owner.
One such value for the latter case is (-1L). So we can set owner to 1 for
reader-owned, -1 for writer-owned. The owner is unknown in both cases.

To handle transfer of rwsem ownership, the higher level code should
set the owner field to -1 to indicate a write-locked rwsem with unknown
owner.  Optimistic spinning will be disabled in this case.

Once the higher level code figures who the new owner is, it can then
set the owner field accordingly.

Tested-by: Amir Goldstein 
Signed-off-by: Waiman Long 
Acked-by: Peter Zijlstra 
Cc: Andrew Morton 
Cc: Davidlohr Bueso 
Cc: Jan Kara 
Cc: Linus Torvalds 
Cc: Matthew Wilcox 
Cc: Oleg Nesterov 
Cc: Paul E. McKenney 
Cc: Theodore Y. Ts'o 
Cc: Thomas Gleixner 
Cc: Will Deacon 
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

locking/rwsem-xadd: Fix missed wakeup due to reordering of load

2017-09-29T08:10:20+00:00

If a spinner is present, there is a chance that the load of
rwsem_has_spinner() in rwsem_wake() can be reordered with
respect to decrement of rwsem count in __up_write() leading
to wakeup being missed:

 spinning writer                  up_write caller
 ---------------                  -----------------------
 [S] osq_unlock()                 [L] osq
  spin_lock(wait_lock)
  sem->count=0xFFFFFFFF00000001
            +0xFFFFFFFF00000000
  count=sem->count
  MB
                                   sem->count=0xFFFFFFFE00000001
                                             -0xFFFFFFFF00000001
                                   spin_trylock(wait_lock)
                                   return
 rwsem_try_write_lock(count)
 spin_unlock(wait_lock)
 schedule()

Reordering of atomic_long_sub_return_release() in __up_write()
and rwsem_has_spinner() in rwsem_wake() can cause missing of
wakeup in up_write() context. In spinning writer, sem->count
and local variable count is 0XFFFFFFFE00000001. It would result
in rwsem_try_write_lock() failing to acquire rwsem and spinning
writer going to sleep in rwsem_down_write_failed().

The smp_rmb() will make sure that the spinner state is
consulted after sem->count is updated in up_write context.

Signed-off-by: Prateek Sood 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: dave@stgolabs.net
Cc: longman@redhat.com
Cc: parri.andrea@gmail.com
Cc: sramana@codeaurora.org
Link: http://lkml.kernel.org/r/1504794658-15397-1-git-send-email-prsood@codeaurora.org
Signed-off-by: Ingo Molnar

locking/rwsem-xadd: Add killable versions of rwsem_down_read_failed()

2017-08-10T10:28:55+00:00

Rename rwsem_down_read_failed() in __rwsem_down_read_failed_common()
and teach it to abort waiting in case of pending signals and killable
state argument passed.

Note, that we shouldn't wake anybody up in EINTR path, as:

We check for (waiter.task) under spinlock before we go to out_nolock
path. Current task wasn't able to be woken up, so there are
a writer, owning the sem, or a writer, which is the first waiter.
In the both cases we shouldn't wake anybody. If there is a writer,
owning the sem, and we were the only waiter, remove RWSEM_WAITING_BIAS,
as there are no waiters anymore.

Signed-off-by: Kirill Tkhai 
Signed-off-by: Peter Zijlstra (Intel) 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: arnd@arndb.de
Cc: avagin@virtuozzo.com
Cc: davem@davemloft.net
Cc: fenghua.yu@intel.com
Cc: gorcunov@virtuozzo.com
Cc: heiko.carstens@de.ibm.com
Cc: hpa@zytor.com
Cc: ink@jurassic.park.msu.ru
Cc: mattst88@gmail.com
Cc: rth@twiddle.net
Cc: schwidefsky@de.ibm.com
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/149789534632.9059.2901382369609922565.stgit@localhost.localdomain
Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:34+00:00

We are going to split  out of , which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder  file that just
maps to  to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds 
Cc: Mike Galbraith 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar