This reverts commit 2bb2b7b57f81255c13f4395ea911d6bdc70c9fe2. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220623145157.21938-7-pmladek@suse.com
This reverts commit b87f02307d3cfbda768520f0687c51ca77e14fc3. The testing of 5.19 release candidates revealed missing synchronization between early and regular console functionality. It would be possible to start the console kthreads later as a workaround. But it is clear that console lock serialized console drivers between each other. It opens a big area of possible problems that were not considered by people involved in the development and review. printk() is crucial for debugging kernel issues and console output is very important part of it. The number of consoles is huge and a proper review would take some time. As a result it need to be reverted for 5.19. Link: https://lore.kernel.org/r/YrBdjVwBOVgLfHyb@alley Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220623145157.21938-2-pmladek@suse.com
There are reports that the console kthreads block the global console lock when the system is going down, for example, reboot, panic. First part of the solution was to block kthreads in these problematic system states so they stopped handling newly added messages. Second part of the solution is to wait when for the kthreads when they are actively printing. It solves the problem when a message was printed before the system entered the problematic state and the kthreads managed to step in. A busy waiting has to be used because panic() can be called in any context and in an unknown state of the scheduler. There must be a timeout because the kthread might get stuck or sleeping and never release the lock. The timeout 10s is an arbitrary value inspired by the softlockup timeout. Link: https://lore.kernel.org/r/20220610205038.GA3050413@paulmck-ThinkPad-P17-Gen-1 Link: https://lore.kernel.org/r/CAMdYzYpF4FNTBPZsEFeWRuEwSies36QM_As8osPWZSr2q-viEA@mail.gmail.com Signed-off-by: Petr Mladek <pmladek@suse.com> Tested-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/r/20220615162805.27962-3-pmladek@suse.com
Pull sysctl updates from Luis Chamberlain: "For two kernel releases now kernel/sysctl.c has been being cleaned up slowly, since the tables were grossly long, sprinkled with tons of #ifdefs and all this caused merge conflicts with one susbystem or another. This tree was put together to help try to avoid conflicts with these cleanups going on different trees at time. So nothing exciting on this pull request, just cleanups. Thanks a lot to the Uniontech and Huawei folks for doing some of this nasty work" * tag 'sysctl-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (28 commits) sched: Fix build warning without CONFIG_SYSCTL reboot: Fix build warning without CONFIG_SYSCTL kernel/kexec_core: move kexec_core sysctls into its own file sysctl: minor cleanup in new_dir() ftrace: fix building with SYSCTL=y but DYNAMIC_FTRACE=n fs/proc: Introduce list_for_each_table_entry for proc sysctl mm: fix unused variable kernel warning when SYSCTL=n latencytop: move sysctl to its own file ftrace: fix building with SYSCTL=n but DYNAMIC_FTRACE=y ftrace: Fix build warning ftrace: move sysctl_ftrace_enabled to ftrace.c kernel/do_mount_initrd: move real_root_dev sysctls to its own file kernel/delayacct: move delayacct sysctls to its own file kernel/acct: move acct sysctls to its own file kernel/panic: move panic sysctls to its own file kernel/lockdep: move lockdep sysctls to its own file mm: move page-writeback sysctls to their own file mm: move oom_kill sysctls to their own file kernel/reboot: move reboot sysctls to its own file sched: Move energy_aware sysctls to topology.c ...
Pull printk updates from Petr Mladek: - Offload writing printk() messages on consoles to per-console kthreads. It prevents soft-lockups when an extensive amount of messages is printed. It was observed, for example, during boot of large systems with a lot of peripherals like disks or network interfaces. It prevents live-lockups that were observed, for example, when messages about allocation failures were reported and a CPU handled consoles instead of reclaiming the memory. It was hard to solve even with rate limiting because it would need to take into account the amount of messages and the speed of all consoles. It is a must to have for real time. Otherwise, any printk() might break latency guarantees. The per-console kthreads allow to handle each console on its own speed. Slow consoles do not longer slow down faster ones. And printk() does not longer unpredictably slows down various code paths. There are situations when the kthreads are either not available or not reliable, for example, early boot, suspend, or panic. In these situations, printk() uses the legacy mode and tries to handle consoles immediately. - Add documentation for the printk index. * tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk, tracing: fix console tracepoint printk: remove @console_locked printk: extend console_lock for per-console locking printk: add kthread console printers printk: add functions to prefer direct printing printk: add pr_flush() printk: move buffer definitions into console_emit_next_record() caller printk: refactor and rework printing logic printk: add con_printk() macro for console details printk: call boot_delay_msec() in printk_delay() printk: get caller_id/timestamp after migration disable printk: wake waiters for safe and NMI contexts printk: wake up all waiters printk: add missing memory barrier to wake_up_klogd() printk: cpu sync always disable interrupts printk: rename cpulock functions printk/index: Printk index feature documentation MAINTAINERS: Add printk indexing maintainers on mention of printk_index
In preparation for Clang supporting randstruct, reorganize the Kconfigs, move the attribute macros, and generalize the feature to be named CONFIG_RANDSTRUCT for on/off, CONFIG_RANDSTRUCT_FULL for the full randomization mode, and CONFIG_RANDSTRUCT_PERFORMANCE for the cache-line sized mode. Cc: linux-hardening@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220503205503.3054173-4-keescook@chromium.org
Once kthread printing is available, console printing will no longer occur in the context of the printk caller. However, there are some special contexts where it is desirable for the printk caller to directly print out kernel messages. Using pr_flush() to wait for threaded printers is only possible if the caller is in a sleepable context and the kthreads are active. That is not always the case. Introduce printk_prefer_direct_enter() and printk_prefer_direct_exit() functions to explicitly (and globally) activate/deactivate preferred direct console printing. The term "direct console printing" refers to printing to all enabled consoles from the context of the printk caller. The term "prefer" is used because this type of printing is only best effort. If the console is currently locked or other printers are already actively printing, the printk caller will need to rely on the other contexts to handle the printing. This preferred direct printing is how all printing has been handled until now (unless it was explicitly deferred). When kthread printing is introduced, there may be some unanticipated problems due to kthreads being unable to flush important messages. In order to minimize such risks, preferred direct printing is activated for the primary important messages when the system experiences general types of major errors. These are: - emergency reboot/shutdown - cpu and rcu stalls - hard and soft lockups - hung tasks - warn - sysrq Note that since kthread printing does not yet exist, no behavior changes result from this commit. This is only implementing the counter and marking the various places where preferred direct printing is active. Signed-off-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220421212250.565456-13-john.ogness@linutronix.de
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty dishes, this makes it very difficult to maintain. To help with this maintenance let's start by moving sysctls to places where they actually belong. The proc sysctl maintainers do not want to know what sysctl knobs you wish to add for your own piece of code, we just care about the core logic. All filesystem syctls now get reviewed by fs folks. This commit follows the commit of fs, move the oops_all_cpu_backtrace sysctl to its own file, kernel/panic.c. Signed-off-by: tangmeng <tangmeng@uniontech.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>