linux-toradex.git/kernel/power/disk.c, branch v2.6.23.12

Fix ThinkPad T42 poweroff failure introduced by by "PM: Introduce pm_power_off_prepare"

2007-07-26T19:13:06+00:00

Commit bd804eba1c8597cbb7cd5a5f9fe886aae16a079a ("PM: Introduce
pm_power_off_prepare") caused problems in the poweroff path, as reported by
YOSHIFUJI Hideaki / 吉藤英明.

Generally, sysdev_shutdown() should be called after the ACPI preparation for
powering the system off.  To make it happen, we can separate sysdev_shutdown()
from device_shutdown() and call it directly wherever necessary.

Signed-off-by: Rafael J. Wysocki 
Tested-by: YOSHIFUJI Hideaki / 吉藤英明 
Signed-off-by: Linus Torvalds

PM: introduce hibernation and suspend notifiers

2007-07-19T17:04:42+00:00

Make it possible to register hibernation and suspend notifiers, so that
subsystems can perform hibernation-related or suspend-related operations that
should not be carried out by device drivers' .suspend() and .resume()
routines.

[akpm@linux-foundation.org: build fixes]
[akpm@linux-foundation.org: cleanups]
Signed-off-by: Rafael J. Wysocki 
Acked-by: Pavel Machek 
Cc: Nigel Cunningham 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Hibernation: prepare to enter the low power state

2007-07-19T17:04:42+00:00

During hibernation we call hibernation_ops->prepare() before creating the image,
but then, before saving it, we cancel the power transition by calling
hibernation_ops->finish().  Thus prior to calling hibernation_ops->enter() we
should let the platform firmware know that we're going to enter the low power
state after all.

Signed-off-by: Rafael J. Wysocki 
Cc: Gautham R Shenoy 
Cc: Pavel Machek 
Cc: Nigel Cunningham 
Cc: Oleg Nesterov 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

swsusp: fix hibernation code ordering

2007-07-19T17:04:42+00:00

Change the code ordering so that hibernation_ops->prepare() is called after
device_suspend().  This is needed so that we don't violate the ACPI
specification, which states that the _PTS and _GTS system-control methods,
executed from acpi_sleep_prepare(), ought to be called after devices have been
put in low power states.

The "Finish" label in hibernation_restore() is moved, because device_suspend()
resumes devices if the suspending of them fails and the restore code ordering
should reflect the hibernation code ordering.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Pavel Machek 
Cc: Nigel Cunningham 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

swsusp: introduce restore platform operations

2007-07-19T17:04:42+00:00

At least on some machines it is necessary to prepare the ACPI firmware for the
restoration of the system memory state from the hibernation image if the
"platform" mode of hibernation has been used.  Namely, in that cases we need
to disable the GPEs before replacing the "boot" kernel with the "frozen"
kernel (cf.  http://bugzilla.kernel.org/show_bug.cgi?id=7887).  After the
restore they will be re-enabled by hibernation_ops->finish(), but if the
restore fails, they have to be re-enabled by the restore code explicitly.

For this purpose we can introduce two additional hibernation operations,
called pre_restore() and restore_cleanup() and call them from the restore code
path.  Still, they should be called if the "platform" mode of hibernation has
been used, so we need to pass the information about the hibernation mode from
the "frozen" kernel to the "boot" kernel in the image header.

Apparently, we can't drop the disabling of GPEs before the restore because of
Bug #7887 .   We also can't do it unconditionally, because the GPEs wouldn't
have been enabled after a successful restore if the suspend had been done in
the 'shutdown' or 'reboot' mode.

In principle we could (and probably should) unconditionally disable the GPEs
before each snapshot creation *and* before the restore, but then we'd have to
unconditionally enable them after the snapshot creation as well as after the
restore (or restore failure)   Still, for this purpose we'd need to modify
acpi_enter_sleep_state_prep() and acpi_leave_sleep_state() and we'd have to
introduce some mechanism synchronizing the disablind/enabling of the GPEs with
the device drivers' .suspend()/.resume() routines and with
disable_/enable_nonboot_cpus().   However, this would have affected the
suspend (ie.  s2ram) code as well as the hibernation, which I'd like to avoid
in this patch series.

Signed-off-by: Rafael J. Wysocki 
Cc: Nigel Cunningham 
Cc: Pavel Machek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

swsusp: remove code duplication between disk.c and user.c

2007-07-19T17:04:42+00:00

Currently, much of the code in kernel/power/disk.c is duplicated in
kernel/power/user.c , mainly for historical reasons.  By eliminating this code
duplication we can reduce the size of user.c quite substantially and remove
the maintenance difficulty resulting from it.

[bunk@stusta.de: kernel/power/disk.c: make code static]
Signed-off-by: Rafael J. Wysocki 
Acked-by: Pavel Machek 
Cc: Nigel Cunningham 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

swsusp: fix sysfs interface

2007-05-17T12:23:05+00:00

The sysfs files /sys/power/disk and /sys/power/state do not work as
documented, since they allow the user to write only a few initial
characters of the input string to trigger the option (eg.  'echo pl >
/sys/power/disk' activates the platform mode of hibernation).  Fix it.

Special thanks to Peter Moulder  for
pointing out the problem.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Pavel Machek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

PM: Separate hibernation code from suspend code

2007-05-09T19:30:48+00:00

[ With Johannes Berg  ]

Separate the hibernation (aka suspend to disk code) from the other suspend
code.  In particular:

 * Remove the definitions related to hibernation from include/linux/pm.h
 * Introduce struct hibernation_ops and a new hibernate() function to hibernate
   the system, defined in include/linux/suspend.h
 * Separate suspend code in kernel/power/main.c from hibernation-related code
   in kernel/power/disk.c and kernel/power/user.c (with the help of
   hibernation_ops)
 * Switch ACPI (the only user of pm_ops.pm_disk_mode) to hibernation_ops

Signed-off-by: Rafael J. Wysocki 
Cc: Greg KH 
Cc: Pavel Machek 
Cc: Nigel Cunningham 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

power management: change /sys/power/disk display

2007-05-07T19:12:59+00:00

Change /sys/power/disk to display all valid modes as well as the currently
selected one in a fashion known from the LED subsystem.

This changes userspace API, but it is apparently not used much (we asked
some userspace developers)

Signed-off-by: Johannes Berg 
Acked-by: "Rafael J. Wysocki" 
Acked-by: Pavel Machek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

swsusp: use GFP_KERNEL for creating basic data structures

2007-05-07T19:12:59+00:00

Make swsusp call create_basic_memory_bitmaps() before processes are frozen, so
that GFP_KERNEL allocations can be made in it.  Additionally, ensure that the
swsusp's userland interface won't be used while either pm_suspend_disk() or
software_resume() is being executed.

Signed-off-by: Rafael J. Wysocki 
Acked-by: Pavel Machek 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds