linux-toradex.git/kernel/power/swap.c, branch v3.5-rc2

PM / Hibernate: Hibernate/thaw fixes/improvements

2012-05-01T19:24:15+00:00

 1. Do not allocate memory for buffers from emergency pools, unless
    absolutely required. Do not warn about and do not retry non-essential
    failed allocations.

 2. Do not check the amount of free pages left on every single page
    write, but wait until one map is completely populated and then check.

 3. Set maximum number of pages for read buffering consistently, instead
    of inadvertently depending on the size of the sector type.

 4. Fix copyright line, which I missed when I submitted the hibernation
    threading patch.

 5. Dispense with bit shifting arithmetic to improve readability.

 6. Really recalculate the number of pages required to be free after all
    allocations have been done.

 7. Fix calculation of pages required for read buffering. Only count in
    pages that do not belong to high memory.

Signed-off-by: Bojan Smojver 
Signed-off-by: Rafael J. Wysocki

PM / Hibernate: fix the number of pages used for hibernate/thaw buffering

2012-04-24T21:53:28+00:00

Hibernation regression fix, since 3.2.

Calculate the number of required free pages based on non-high memory
pages only, because that is where the buffers will come from.

Commit 081a9d043c983f161b78fdc4671324d1342b86bc introduced a new buffer
page allocation logic during hibernation, in order to improve the
performance. The amount of pages allocated was calculated based on total
amount of pages available, although only non-high memory pages are
usable for this purpose. This caused hibernation code to attempt to over
allocate pages on platforms that have high memory, which led to hangs.

Signed-off-by: Bojan Smojver 
Signed-off-by: Rafael J. Wysocki

PM / Hibernate: Drop the check of swap space size for compressed image

2012-01-13T23:41:37+00:00

For compressed image, the space required is not known until
we finish compressing and writing all pages.
This patch drops the check, and if swap space is not enough
finally, system can still restore to normal after writing
swap fails for compressed images.

Signed-off-by: Barry Song 
Acked-by: Pavel Machek 
Signed-off-by: Rafael J. Wysocki

fs: move code out of buffer.c

2012-01-04T03:54:07+00:00

Move invalidate_bdev, block_sync_page into fs/block_dev.c.  Export
kill_bdev as well, so brd doesn't have to open code it.  Reduce
buffer_head.h requirement accordingly.

Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving.  The small comment replacing it says enough.

Signed-off-by: Nick Piggin 
Cc: Al Viro 
Cc: Christoph Hellwig 
Signed-off-by: Andrew Morton 
Signed-off-by: Al Viro

PM / Hibernate: Improve performance of LZO/plain hibernation, checksum image

2011-10-16T21:30:38+00:00

Use threads for LZO compression/decompression on hibernate/thaw.
Improve buffering on hibernate/thaw.
Calculate/verify CRC32 of the image pages on hibernate/thaw.

In my testing, this improved write/read speed by a factor of about two.

Signed-off-by: Bojan Smojver 
Signed-off-by: Rafael J. Wysocki

Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block

2011-01-13T18:45:01+00:00

* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...

Merge branch 'master' into for-next

2010-12-22T17:57:02+00:00

Conflicts:
	MAINTAINERS
	arch/arm/mach-omap2/pm24xx.c
	drivers/scsi/bfa/bfa_fcpim.c

Needed to update to apply fixes for which the old branch was too
outdated.

PM / Hibernate: Restore old swap signature to avoid user space breakage

2010-12-16T16:08:58+00:00

Commit 3624eb0 (PM / Hibernate: Modify signature used to mark swap)
attempted to modify hibernate signature used to mark swap partitions
containing hibernation images, so that old kernels don't try to
handle compressed images.  However, this change broke resume from
hibernation on Fedora 14 that apparently doesn't pass the resume=
argument to the kernel and tries to trigger resume from early user
space.  This doesn't work, because the signature is now different,
so the old signature has to be restored to avoid the problem.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22732 .

Reported-by: Dr. David Alan Gilbert 
Reported-by: Zhang Rui 
Reported-by: Pascal Chapperon 
Signed-off-by: Rafael J. Wysocki

PM / Hibernate: Use async I/O when reading compressed hibernation image

2010-12-06T22:38:29+00:00

This is a fix for reading LZO compressed image using async I/O.
Essentially, instead of having just one page into which we keep
reading blocks from swap, we allocate enough of them to cover the
largest compressed size and then let block I/O pick them all up. Once
we have them all (and here we wait), we decompress them, as usual.
Obviously, the very first block we still pick up synchronously,
because we need to know the size of the lot before we pick up the
rest.

Also fixed the copyright line, which I've forgotten before.

Signed-off-by: Bojan Smojver 
Signed-off-by: Rafael J. Wysocki

block: clean up blkdev_get() wrappers and their users

2010-11-13T10:55:18+00:00

After recent blkdev_get() modifications, open_by_devnum() and
open_bdev_exclusive() are simple wrappers around blkdev_get().
Replace them with blkdev_get_by_dev() and blkdev_get_by_path().

blkdev_get_by_dev() is identical to open_by_devnum().
blkdev_get_by_path() is slightly different in that it doesn't
automatically add %FMODE_EXCL to @mode.

All users are converted.  Most conversions are mechanical and don't
introduce any behavior difference.  There are several exceptions.

* btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no
  reason to OR it explicitly on blkdev_put().

* gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in
  sb->s_mode.

* With the above changes, sb->s_mode now always should contain
  FMODE_EXCL.  WARN_ON_ONCE() added to kill_block_super() to detect
  errors.

The new blkdev_get_*() functions are with proper docbook comments.
While at it, add function description to blkdev_get() too.

Signed-off-by: Tejun Heo 
Cc: Philipp Reisner 
Cc: Neil Brown 
Cc: Mike Snitzer 
Cc: Joern Engel 
Cc: Chris Mason 
Cc: Jan Kara 
Cc: "Theodore Ts'o" 
Cc: KONISHI Ryusuke 
Cc: reiserfs-devel@vger.kernel.org
Cc: xfs-masters@oss.sgi.com
Cc: Alexander Viro