To streamline maintenance efforts, we propose removing the implementation
of swap_free().  Instead, we can simply invoke swap_free_nr() with nr set
to 1.  swap_free_nr() is designed with a bitmap consisting of only one
long, resulting in overhead that can be ignored for cases where nr equals
1.

A prime candidate for leveraging swap_free_nr() lies within
kernel/power/swap.c.  Implementing this change facilitates the adoption of
batch processing for hibernation.

Link: https://lkml.kernel.org/r/20240529082824.150954-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Chris Li <chrisl@kernel.org>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull vfs fixes from Christian Brauner:

 - Fix io_uring based write-through after converting cifs to use the
   netfs library

 - Fix aio error handling when doing write-through via netfs library

 - Fix performance regression in iomap when used with non-large folio
   mappings

 - Fix signalfd error code

 - Remove obsolete comment in signalfd code

 - Fix async request indication in netfs_perform_write() by raising
   BDP_ASYNC when IOCB_NOWAIT is set

 - Yield swap device immediately to prevent spurious EBUSY errors

 - Don't cross a .backup mountpoint from backup volumes in afs to avoid
   infinite loops

 - Fix a race between umount and async request completion in 9p after 9p
   was converted to use the netfs library

* tag 'vfs-6.10-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  netfs, 9p: Fix race between umount and async request completion
  afs: Don't cross .backup mountpoint from backup volume
  swap: yield device immediately
  netfs: Fix setting of BDP_ASYNC from iocb flags
  signalfd: drop an obsolete comment
  signalfd: fix error return code
  iomap: fault in smaller chunks for non-large folio mappings
  filemap: add helper mapping_max_folio_size()
  netfs: Fix AIO error handling when doing write-through
  netfs: Fix io_uring based write-through

Otherwise we can cause spurious EBUSY issues when trying to mount the
rootfs later on.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=218845
Reported-by: Petri Kaukasoina <petri.kaukasoina@tuni.fi>
Signed-off-by: Christian Brauner <brauner@kernel.org>

same as with the swap...

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull power management updates from Rafael Wysocki:
 "From the functional perspective, the most significant change here is
  the addition of support for Energy Models that can be updated
  dynamically at run time.

  There is also the addition of LZ4 compression support for hibernation,
  the new preferred core support in amd-pstate, new platforms support in
  the Intel RAPL driver, new model-specific EPP handling in intel_pstate
  and more.

  Apart from that, the cpufreq default transition delay is reduced from
  10 ms to 2 ms (along with some related adjustments), the system
  suspend statistics code undergoes a significant rework and there is a
  usual bunch of fixes and code cleanups all over.

  Specifics:

   - Allow the Energy Model to be updated dynamically (Lukasz Luba)

   - Add support for LZ4 compression algorithm to the hibernation image
     creation and loading code (Nikhil V)

   - Fix and clean up system suspend statistics collection (Rafael
     Wysocki)

   - Simplify device suspend and resume handling in the power management
     core code (Rafael Wysocki)

   - Fix PCI hibernation support description (Yiwei Lin)

   - Make hibernation take set_memory_ro() return values into account as
     appropriate (Christophe Leroy)

   - Set mem_sleep_current during kernel command line setup to avoid an
     ordering issue with handling it (Maulik Shah)

   - Fix wake IRQs handling when pm_runtime_force_suspend() is used as a
     driver's system suspend callback (Qingliang Li)

   - Simplify pm_runtime_get_if_active() usage and add a replacement for
     pm_runtime_put_autosuspend() (Sakari Ailus)

   - Add a tracepoint for runtime_status changes tracking (Vilas Bhat)

   - Fix section title markdown in the runtime PM documentation (Yiwei
     Lin)

   - Enable preferred core support in the amd-pstate cpufreq driver
     (Meng Li)

   - Fix min_perf assignment in amd_pstate_adjust_perf() and make the
     min/max limit perf values in amd-pstate always stay within the
     (highest perf, lowest perf) range (Tor Vic, Meng Li)

   - Allow intel_pstate to assign model-specific values to strings used
     in the EPP sysfs interface and make it do so on Meteor Lake
     (Srinivas Pandruvada)

   - Drop long-unused cpudata::prev_cummulative_iowait from the
     intel_pstate cpufreq driver (Jiri Slaby)

   - Prevent scaling_cur_freq from exceeding scaling_max_freq when the
     latter is an inefficient frequency (Shivnandan Kumar)

   - Change default transition delay in cpufreq to 2ms (Qais Yousef)

   - Remove references to 10ms minimum sampling rate from comments in
     the cpufreq code (Pierre Gondois)

   - Honour transition_latency over transition_delay_us in cpufreq (Qais
     Yousef)

   - Stop unregistering cpufreq cooling on CPU hot-remove (Viresh Kumar)

   - General enhancements / cleanups to ARM cpufreq drivers (tianyu2,
     Nícolas F. R. A. Prado, Erick Archer, Arnd Bergmann, Anastasia
     Belova)

   - Update cpufreq-dt-platdev to block/approve devices (Richard Acayan)

   - Make the SCMI cpufreq driver get a transition delay value from
     firmware (Pierre Gondois)

   - Prevent the haltpoll cpuidle governor from shrinking guest
     poll_limit_ns below grow_start (Parshuram Sangle)

   - Avoid potential overflow in integer multiplication when computing
     cpuidle state parameters (C Cheng)

   - Adjust MWAIT hint target C-state computation in the ACPI cpuidle
     driver and in intel_idle to return a correct value for C0 (He
     Rongguang)

   - Address multiple issues in the TPMI RAPL driver and add support for
     new platforms (Lunar Lake-M, Arrow Lake) to Intel RAPL (Zhang Rui)

   - Fix freq_qos_add_request() return value check in dtpm_cpu (Daniel
     Lezcano)

   - Fix kernel-doc for dtpm_create_hierarchy() (Yang Li)

   - Fix file leak in get_pkg_num() in x86_energy_perf_policy (Samasth
     Norway Ananda)

   - Fix cpupower-frequency-info.1 man page typo (Jan Kratochvil)

   - Fix a couple of warnings in the OPP core code related to W=1 builds
     (Viresh Kumar)

   - Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h (Viresh
     Kumar)

   - Extend dev_pm_opp_data with turbo support (Sibi Sankar)

   - dt-bindings: drop maxItems from inner items (David Heidelberg)"

* tag 'pm-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (95 commits)
  dt-bindings: opp: drop maxItems from inner items
  OPP: debugfs: Fix warning around icc_get_name()
  OPP: debugfs: Fix warning with W=1 builds
  cpufreq: Move dev_pm_opp_{init|free}_cpufreq_table() to pm_opp.h
  OPP: Extend dev_pm_opp_data with turbo support
  Fix cpupower-frequency-info.1 man page typo
  cpufreq: scmi: Set transition_delay_us
  firmware: arm_scmi: Populate fast channel rate_limit
  firmware: arm_scmi: Populate perf commands rate_limit
  cpuidle: ACPI/intel: fix MWAIT hint target C-state computation
  PM: sleep: wakeirq: fix wake irq warning in system suspend
  powercap: dtpm: Fix kernel-doc for dtpm_create_hierarchy() function
  cpufreq: Don't unregister cpufreq cooling on CPU hotplug
  PM: suspend: Set mem_sleep_current during kernel command line setup
  cpufreq: Honour transition_latency over transition_delay_us
  cpufreq: Limit resolving a frequency to policy min/max
  Documentation: PM: Fix runtime_pm.rst markdown syntax
  cpufreq: amd-pstate: adjust min/max limit perf
  cpufreq: Remove references to 10ms min sampling rate
  cpufreq: intel_pstate: Update default EPPs for Meteor Lake
  ...

Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-6-adbd023e19cc@kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>

set_memory_ro() and set_memory_rw() can fail, leaving memory
unprotected.

Take the returned value into account and abort in case of
failure.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently for hibernation, LZO is the only compression algorithm
available and uses the existing LZO library calls. However, there
is no flexibility to switch to other algorithms which provides better
results. The main idea is that different compression algorithms have
different characteristics and hibernation may benefit when it uses
alternate algorithms.

By moving to crypto based APIs, it lays a foundation to use other
compression algorithms for hibernation. There are no functional changes
introduced by this approach.

Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Renaming lzo* to generic names, except for lzo_xxx() APIs. This is
used in the next patch where we move to crypto based APIs for
compression. There are no functional changes introduced by this
approach.

Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Function swsusp_close() does not have any parameters, so remove the
description of parameter @exclusive to prevent this warning.

swap.c:1573: warning: Excess function parameter 'exclusive' description in 'swsusp_close'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>