linux-toradex.git/kernel/power, branch v3.10.78 Linux kernel for Apalis and Colibri modules PM / QoS: remove duplicate call to pm_qos_update_target 2015-03-18T12:22:28+00:00 Michael Scott michael.scott@linaro.org 2015-03-10T20:15:02+00:00 8dbaea2b3d24e3a77e6a853ff76c19c5a6052f4e In 3.10.y backport patch 1dba303727f52ea062580b0a9b3f0c3b462769cf, the logic to call pm_qos_update_target was moved to __pm_qos_update_request. However, the original code was left in function pm_qos_update_request. Currently, if pm_qos_update_request is called where new_value != req->node.prio then pm_qos_update_target will be called twice in a row. Once in pm_qos_update_request and then again in the following call to _pm_qos_update_request. Removing the left over code from pm_qos_update_request stops this second call to pm_qos_update_target where the work of removing / re-adding the new_value in the constraints list would be duplicated. Signed-off-by: Michael Scott <michael.scott@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
In 3.10.y backport patch 1dba303727f52ea062580b0a9b3f0c3b462769cf,
the logic to call pm_qos_update_target was moved to __pm_qos_update_request.
However, the original code was left in function pm_qos_update_request.

Currently, if pm_qos_update_request is called where new_value !=
req->node.prio then pm_qos_update_target will be called twice in a row.
Once in pm_qos_update_request and then again in the following call to
_pm_qos_update_request.

Removing the left over code from pm_qos_update_request stops this second
call to pm_qos_update_target where the work of removing / re-adding the
new_value in the constraints list would be duplicated.

Signed-off-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM / Sleep: fix recovery during resuming from hibernation 2014-11-14T16:48:00+00:00 Imre Deak imre.deak@intel.com 2014-10-24T17:29:10+00:00 1eaaef74ada050d820e5dd2132a56fd3c66b1549 commit 94fb823fcb4892614f57e59601bb9d4920f24711 upstream. If a device's dev_pm_ops::freeze callback fails during the QUIESCE phase, we don't rollback things correctly calling the thaw and complete callbacks. This could leave some devices in a suspended state in case of an error during resuming from hibernation. Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 94fb823fcb4892614f57e59601bb9d4920f24711 upstream.

If a device's dev_pm_ops::freeze callback fails during the QUIESCE
phase, we don't rollback things correctly calling the thaw and complete
callbacks. This could leave some devices in a suspended state in case of
an error during resuming from hibernation.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OOM, PM: OOM killed task shouldn't escape PM suspend 2014-11-14T16:47:58+00:00 Michal Hocko mhocko@suse.cz 2014-10-20T16:12:32+00:00 e033782a2669ae60db31d28127974bac18c63e33 commit 5695be142e203167e3cb515ef86a88424f3524eb upstream. PM freezer relies on having all tasks frozen by the time devices are getting frozen so that no task will touch them while they are getting frozen. But OOM killer is allowed to kill an already frozen task in order to handle OOM situtation. In order to protect from late wake ups OOM killer is disabled after all tasks are frozen. This, however, still keeps a window open when a killed task didn't manage to die by the time freeze_processes finishes. Reduce the race window by checking all tasks after OOM killer has been disabled. This is still not race free completely unfortunately because oom_killer_disable cannot stop an already ongoing OOM killer so a task might still wake up from the fridge and get killed without freeze_processes noticing. Full synchronization of OOM and freezer is, however, too heavy weight for this highly unlikely case. Introduce and check oom_kills counter which gets incremented early when the allocator enters __alloc_pages_may_oom path and only check all the tasks if the counter changes during the freezing attempt. The counter is updated so early to reduce the race window since allocator checked oom_killer_disabled which is set by PM-freezing code. A false positive will push the PM-freezer into a slow path but that is not a big deal. Changes since v1 - push the re-check loop out of freeze_processes into check_frozen_processes and invert the condition to make the code more readable as per Rafael Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring) Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5695be142e203167e3cb515ef86a88424f3524eb upstream.

PM freezer relies on having all tasks frozen by the time devices are
getting frozen so that no task will touch them while they are getting
frozen. But OOM killer is allowed to kill an already frozen task in
order to handle OOM situtation. In order to protect from late wake ups
OOM killer is disabled after all tasks are frozen. This, however, still
keeps a window open when a killed task didn't manage to die by the time
freeze_processes finishes.

Reduce the race window by checking all tasks after OOM killer has been
disabled. This is still not race free completely unfortunately because
oom_killer_disable cannot stop an already ongoing OOM killer so a task
might still wake up from the fridge and get killed without
freeze_processes noticing. Full synchronization of OOM and freezer is,
however, too heavy weight for this highly unlikely case.

Introduce and check oom_kills counter which gets incremented early when
the allocator enters __alloc_pages_may_oom path and only check all the
tasks if the counter changes during the freezing attempt. The counter
is updated so early to reduce the race window since allocator checked
oom_killer_disabled which is set by PM-freezing code. A false positive
will push the PM-freezer into a slow path but that is not a big deal.

Changes since v1
- push the re-check loop out of freeze_processes into
  check_frozen_processes and invert the condition to make the code more
  readable as per Rafael

Fixes: f660daac474c6f (oom: thaw threads if oom killed thread is frozen before deferring)
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM / sleep: Use valid_state() for platform-dependent sleep states only 2014-10-05T21:54:15+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2014-05-26T11:40:53+00:00 5c95fef642043842d7168ee3ae662f80a84fb285 commit 43e8317b0bba1d6eb85f38a4a233d82d7c20d732 upstream. Use the observation that, for platform-dependent sleep states (PM_SUSPEND_STANDBY, PM_SUSPEND_MEM), a given state is either always supported or always unsupported and store that information in pm_states[] instead of calling valid_state() every time we need to check it. Also do not use valid_state() for PM_SUSPEND_FREEZE, which is always valid, and move the pm_test_level validity check for PM_SUSPEND_FREEZE directly into enter_state(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 43e8317b0bba1d6eb85f38a4a233d82d7c20d732 upstream.

Use the observation that, for platform-dependent sleep states
(PM_SUSPEND_STANDBY, PM_SUSPEND_MEM), a given state is either
always supported or always unsupported and store that information
in pm_states[] instead of calling valid_state() every time we
need to check it.

Also do not use valid_state() for PM_SUSPEND_FREEZE, which is always
valid, and move the pm_test_level validity check for PM_SUSPEND_FREEZE
directly into enter_state().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM / sleep: Add state field to pm_states[] entries 2014-10-05T21:54:15+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2014-05-26T11:40:47+00:00 e89547b87ae44b464fef54572d29c0cd32cb9caa commit 27ddcc6596e50cb8f03d2e83248897667811d8f6 upstream. To allow sleep states corresponding to the "mem", "standby" and "freeze" lables to be different from the pm_states[] indexes of those strings, introduce struct pm_sleep_state, consisting of a string label and a state number, and turn pm_states[] into an array of objects of that type. This modification should not lead to any functional changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 27ddcc6596e50cb8f03d2e83248897667811d8f6 upstream.

To allow sleep states corresponding to the "mem", "standby" and
"freeze" lables to be different from the pm_states[] indexes of
those strings, introduce struct pm_sleep_state, consisting of
a string label and a state number, and turn pm_states[] into an
array of objects of that type.

This modification should not lead to any functional changes.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM / sleep: Fix request_firmware() error at resume 2014-07-28T15:00:07+00:00 Takashi Iwai tiwai@suse.de 2014-07-15T06:51:27+00:00 804536e8e033d7917a1384b89d1e29a3457ec429 commit 4320f6b1d9db4ca912c5eb6ecb328b2e090e1586 upstream. The commit [247bc037: PM / Sleep: Mitigate race between the freezer and request_firmware()] introduced the finer state control, but it also leads to a new bug; for example, a bug report regarding the firmware loading of intel BT device at suspend/resume: https://bugzilla.novell.com/show_bug.cgi?id=873790 The root cause seems to be a small window between the process resume and the clear of usermodehelper lock. The request_firmware() function checks the UMH lock and gives up when it's in UMH_DISABLE state. This is for avoiding the invalid f/w loading during suspend/resume phase. The problem is, however, that usermodehelper_enable() is called at the end of thaw_processes(). Thus, a thawed process in between can kick off the f/w loader code path (in this case, via btusb_setup_intel()) even before the call of usermodehelper_enable(). Then usermodehelper_read_trylock() returns an error and request_firmware() spews WARN_ON() in the end. This oneliner patch fixes the issue just by setting to UMH_FREEZING state again before restarting tasks, so that the call of request_firmware() will be blocked until the end of this function instead of returning an error. Fixes: 247bc0374254 (PM / Sleep: Mitigate race between the freezer and request_firmware()) Link: https://bugzilla.novell.com/show_bug.cgi?id=873790 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4320f6b1d9db4ca912c5eb6ecb328b2e090e1586 upstream.

The commit [247bc037: PM / Sleep: Mitigate race between the freezer
and request_firmware()] introduced the finer state control, but it
also leads to a new bug; for example, a bug report regarding the
firmware loading of intel BT device at suspend/resume:
  https://bugzilla.novell.com/show_bug.cgi?id=873790

The root cause seems to be a small window between the process resume
and the clear of usermodehelper lock.  The request_firmware() function
checks the UMH lock and gives up when it's in UMH_DISABLE state.  This
is for avoiding the invalid  f/w loading during suspend/resume phase.
The problem is, however, that usermodehelper_enable() is called at the
end of thaw_processes().  Thus, a thawed process in between can kick
off the f/w loader code path (in this case, via btusb_setup_intel())
even before the call of usermodehelper_enable().  Then
usermodehelper_read_trylock() returns an error and request_firmware()
spews WARN_ON() in the end.

This oneliner patch fixes the issue just by setting to UMH_FREEZING
state again before restarting tasks, so that the call of
request_firmware() will be blocked until the end of this function
instead of returning an error.

Fixes: 247bc0374254 (PM / Sleep: Mitigate race between the freezer and request_firmware())
Link: https://bugzilla.novell.com/show_bug.cgi?id=873790
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM / hibernate: Avoid overflow in hibernate_preallocate_memory() 2013-12-04T18:56:58+00:00 Aaron Lu aaron.lu@intel.com 2013-11-06T00:41:31+00:00 67b51f87ef941607e1e891bf477bd18df53ce6f1 commit fd432b9f8c7c88428a4635b9f5a9c6e174df6e36 upstream. When system has a lot of highmem (e.g. 16GiB using a 32 bits kernel), the code to calculate how much memory we need to preallocate in normal zone may cause overflow. As Leon has analysed: It looks that during computing 'alloc' variable there is overflow: alloc = (3943404 - 1970542) - 1978280 = -5418 (signed) And this function goes to err_out. Fix this by avoiding that overflow. References: https://bugzilla.kernel.org/show_bug.cgi?id=60817 Reported-and-tested-by: Leon Drugi <eyak@wp.pl> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit fd432b9f8c7c88428a4635b9f5a9c6e174df6e36 upstream.

When system has a lot of highmem (e.g. 16GiB using a 32 bits kernel),
the code to calculate how much memory we need to preallocate in
normal zone may cause overflow. As Leon has analysed:

 It looks that during computing 'alloc' variable there is overflow:
 alloc = (3943404 - 1970542) - 1978280 = -5418 (signed)
 And this function goes to err_out.

Fix this by avoiding that overflow.

References: https://bugzilla.kernel.org/show_bug.cgi?id=60817
Reported-and-tested-by: Leon Drugi <eyak@wp.pl>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM / QoS: Fix workqueue deadlock when using pm_qos_update_request_timeout() 2013-08-20T15:43:05+00:00 Stephen Boyd sboyd@codeaurora.org 2013-08-13T21:12:40+00:00 1dba303727f52ea062580b0a9b3f0c3b462769cf commit 40fea92ffb5fa0ef26d10ae0fe5688bc8e61c791 upstream. pm_qos_update_request_timeout() updates a qos and then schedules a delayed work item to bring the qos back down to the default after the timeout. When the work item runs, pm_qos_work_fn() will call pm_qos_update_request() and deadlock because it tries to cancel itself via cancel_delayed_work_sync(). Future callers of that qos will also hang waiting to cancel the work that is canceling itself. Let's extract the little bit of code that does the real work of pm_qos_update_request() and call it from the work function so that we don't deadlock. Before ed1ac6e (PM: don't use [delayed_]work_pending()) this didn't happen because the work function wouldn't try to cancel itself. [backport to 3.10 - gregkh] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 40fea92ffb5fa0ef26d10ae0fe5688bc8e61c791 upstream.

pm_qos_update_request_timeout() updates a qos and then schedules
a delayed work item to bring the qos back down to the default
after the timeout. When the work item runs, pm_qos_work_fn() will
call pm_qos_update_request() and deadlock because it tries to
cancel itself via cancel_delayed_work_sync(). Future callers of
that qos will also hang waiting to cancel the work that is
canceling itself. Let's extract the little bit of code that does
the real work of pm_qos_update_request() and call it from the
work function so that we don't deadlock.

Before ed1ac6e (PM: don't use [delayed_]work_pending()) this didn't
happen because the work function wouldn't try to cancel itself.

[backport to 3.10 - gregkh]

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PM / Sleep: avoid 'autosleep' in shutdown progress 2013-07-28T23:30:21+00:00 Liu ShuoX shuox.liu@intel.com 2013-07-11T08:03:45+00:00 7b4fc5f531f64ce52e5f421c9bc285ccf30ccac8 commit e5248a111bf4048a9f3fab1a9c94c4630a10592a upstream. Prevent automatic system suspend from happening during system shutdown by making try_to_suspend() check system_state and return immediately if it is not SYSTEM_RUNNING. This prevents the following breakage from happening (scenario from Zhang Yanmin): Kernel starts shutdown and calls all device driver's shutdown callback. When a driver's shutdown is called, the last wakelock is released and suspend-to-ram starts. However, as some driver's shut down callbacks already shut down devices and disabled runtime pm, the suspend-to-ram calls driver's suspend callback without noticing that device is already off and causes crash. [rjw: Changelog] Signed-off-by: Liu ShuoX <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit e5248a111bf4048a9f3fab1a9c94c4630a10592a upstream.

Prevent automatic system suspend from happening during system
shutdown by making try_to_suspend() check system_state and return
immediately if it is not SYSTEM_RUNNING.

This prevents the following breakage from happening (scenario from
Zhang Yanmin):

 Kernel starts shutdown and calls all device driver's shutdown
 callback.  When a driver's shutdown is called, the last wakelock is
 released and suspend-to-ram starts.  However, as some driver's shut
 down callbacks already shut down devices and disabled runtime pm,
 the suspend-to-ram calls driver's suspend callback without noticing
 that device is already off and causes crash.

[rjw: Changelog]
Signed-off-by: Liu ShuoX <shuox.liu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux 2013-05-03T02:40:34+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-05-03T02:40:34+00:00 20a2078ce7705a6e0722ef5184336eb8657a58d8 Pull drm updates from Dave Airlie: "This is the main drm pull request for 3.10. Wierd bits: - OMAP drm changes required OMAP dss changes, in drivers/video, so I took them in here. - one more fbcon fix for font handover - VT switch avoidance in pm code - scatterlist helpers for gpu drivers - have acks from akpm Highlights: - qxl kms driver - driver for the spice qxl virtual GPU Nouveau: - fermi/kepler VRAM compression - GK110/nvf0 modesetting support. Tegra: - host1x core merged with 2D engine support i915: - vt switchless resume - more valleyview support - vblank fixes - modesetting pipe config rework radeon: - UVD engine support - SI chip tiling support - GPU registers initialisation from golden values. exynos: - device tree changes - fimc block support Otherwise: - bunches of fixes all over the place." * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits) qxl: update to new idr interfaces. drm/nouveau: fix build with nv50->nvc0 drm/radeon: fix handling of v6 power tables drm/radeon: clarify family checks in pm table parsing drm/radeon: consolidate UVD clock programming drm/radeon: fix UPLL_REF_DIV_MASK definition radeon: add bo tracking debugfs drm/radeon: add new richland pci ids drm/radeon: add some new SI PCI ids drm/radeon: fix scratch reg handling for UVD fence drm/radeon: allocate SA bo in the requested domain drm/radeon: fix possible segfault when parsing pm tables drm/radeon: fix endian bugs in atom_allocate_fb_scratch() OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found OMAPDSS: VENC: Add error handling for venc_probe_pdata OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata OMAPDSS: DSI: Add error handling for dsi_probe_pdata OMAPDSS: SDI: Add error handling for sdi_probe_pdata OMAPDSS: DPI: Add error handling for dpi_probe_pdata ... 
Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 3.10.

  Wierd bits:
   - OMAP drm changes required OMAP dss changes, in drivers/video, so I
     took them in here.
   - one more fbcon fix for font handover
   - VT switch avoidance in pm code
   - scatterlist helpers for gpu drivers - have acks from akpm

  Highlights:
   - qxl kms driver - driver for the spice qxl virtual GPU

  Nouveau:
   - fermi/kepler VRAM compression
   - GK110/nvf0 modesetting support.

  Tegra:
   - host1x core merged with 2D engine support

  i915:
   - vt switchless resume
   - more valleyview support
   - vblank fixes
   - modesetting pipe config rework

  radeon:
   - UVD engine support
   - SI chip tiling support
   - GPU registers initialisation from golden values.

  exynos:
   - device tree changes
   - fimc block support

  Otherwise:
   - bunches of fixes all over the place."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits)
  qxl: update to new idr interfaces.
  drm/nouveau: fix build with nv50->nvc0
  drm/radeon: fix handling of v6 power tables
  drm/radeon: clarify family checks in pm table parsing
  drm/radeon: consolidate UVD clock programming
  drm/radeon: fix UPLL_REF_DIV_MASK definition
  radeon: add bo tracking debugfs
  drm/radeon: add new richland pci ids
  drm/radeon: add some new SI PCI ids
  drm/radeon: fix scratch reg handling for UVD fence
  drm/radeon: allocate SA bo in the requested domain
  drm/radeon: fix possible segfault when parsing pm tables
  drm/radeon: fix endian bugs in atom_allocate_fb_scratch()
  OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found
  OMAPDSS: VENC: Add error handling for venc_probe_pdata
  OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata
  OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata
  OMAPDSS: DSI: Add error handling for dsi_probe_pdata
  OMAPDSS: SDI: Add error handling for sdi_probe_pdata
  OMAPDSS: DPI: Add error handling for dpi_probe_pdata
  ...