linux-toradex.git/kernel/resource.c, branch v2.6.25-rc2

[POWERPC] Add arch-specific walk_memory_remove() for 64-bit powerpc

2008-02-08T08:52:48+00:00

walk_memory_resource() verifies if there are holes in a given memory
range, by checking against /proc/iomem.  On x86/ia64 system memory is
represented in /proc/iomem.  On powerpc, we don't show system memory as
IO resource in /proc/iomem - instead it's maintained in
/proc/device-tree.

This provides a way for an architecture to provide its own
walk_memory_resource() function.  On powerpc, the memory region is
small (16MB), contiguous and non-overlapping.  So extra checking
against the device-tree is not needed.

Signed-off-by: Badari Pulavarty 
Acked-by: KAMEZAWA Hiroyuki 
Cc: Dave Hansen 
Cc: Benjamin Herrenschmidt 
Cc: Kumar Gala 
Signed-off-by: Andrew Morton 
Signed-off-by: Paul Mackerras

Add IORESOUCE_BUSY flag for System RAM

2007-11-15T02:45:39+00:00

i386 and x86-64 registers System RAM as IORESOURCE_MEM | IORESOURCE_BUSY.

But ia64 registers it as IORESOURCE_MEM only.
In addition, memory hotplug code registers new memory as IORESOURCE_MEM too.

This difference causes a failure of memory unplug of x86-64.  This patch
fixes it.

This patch adds IORESOURCE_BUSY to avoid potential overlap mapping by PCI
device.

Signed-off-by: Yasunori Goto 
Signed-off-by: Badari Pulavarty 
Cc: Luck, Tony" 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

memory unplug: memory hotplug cleanup

2007-10-16T16:43:01+00:00

A clean up patch for "scanning memory resource [start, end)" operation.

Now, find_next_system_ram() function is used in memory hotplug, but this
interface is not easy to use and codes are complicated.

This patch adds walk_memory_resouce(start,len,arg,func) function.
The function 'func' is called per valid memory resouce range in [start,pfn).

[pbadari@us.ibm.com: Error handling in walk_memory_resource()]
Signed-off-by: KAMEZAWA Hiroyuki 
Signed-off-by: Badari Pulavarty 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

libata/IDE: remove combined mode quirk

2007-04-28T18:15:59+00:00

Both old-IDE and libata should be able handle all controllers and
devices found using normal resource reservation methods.

This eliminates the awful, low-performing split-driver configuration
where old-IDE drove the PATA portion of a PCI device, in PIO-only mode,
and libata drove the SATA portion of the /same/ PCI device, in DMA mode.
Typically vendors would ship SATA hard drive / PATA optical
configuration, which would lend itself to slow (PIO-only) CD-ROM
performance.

For Intel users running in combined mode, it is now wholly dependent on
your driver choice (potentially link order, if you compile both drivers
in) whether old-IDE or libata will drive your hardware.

In either case, you will get full performance from both SATA and PATA
ports now, without having to pass a kernel command line parameter.

Signed-off-by: Jeff Garzik

[PATCH] remove many unneeded #includes of sched.h

2007-02-14T16:09:54+00:00

After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau 
Acked-by: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

devres: device resource management

2007-02-09T22:39:36+00:00

Implement device resource management, in short, devres.  A device
driver can allocate arbirary size of devres data which is associated
with a release function.  On driver detach, release function is
invoked on the devres data, then, devres data is freed.

devreses are typed by associated release functions.  Some devreses are
better represented by single instance of the type while others need
multiple instances sharing the same release function.  Both usages are
supported.

devreses can be grouped using devres group such that a device driver
can easily release acquired resources halfway through initialization
or selectively release resources (e.g. resources for port 1 out of 4
ports).

This patch adds devres core including documentation and the following
managed interfaces.

* alloc/free	: devm_kzalloc(), devm_kzfree()
* IO region	: devm_request_region(), devm_release_region()
* IRQ		: devm_request_irq(), devm_free_irq()
* DMA		: dmam_alloc_coherent(), dmam_free_coherent(),
		  dmam_declare_coherent_memory(), dmam_pool_create(),
		  dmam_pool_destroy()
* PCI		: pcim_enable_device(), pcim_pin_device(), pci_is_managed()
* iomap		: devm_ioport_map(), devm_ioport_unmap(), devm_ioremap(),
		  devm_ioremap_nocache(), devm_iounmap(), pcim_iomap_table(),
		  pcim_iomap(), pcim_iounmap()

Signed-off-by: Tejun Heo 
Signed-off-by: Jeff Garzik

[PATCH] struct seq_operations and struct file_operations constification

2006-12-07T16:39:46+00:00

 - move some file_operations structs into the .rodata section

 - move static strings from policy_types[] array into the .rodata section

 - fix generic seq_operations usages, so that those structs may be defined
   as "const" as well

[akpm@osdl.org: couple of fixes]
Signed-off-by: Helge Deller 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] kernel-doc for kernel/resource.c

2006-10-03T15:03:41+00:00

Add kernel-doc function headers in kernel/resource.c and use them in DocBook.

Signed-off-by: Randy Dunlap 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Resources: insert identical resources above existing resources

2006-09-27T00:43:52+00:00

If you have two resources which aree exactly the same size,
insert_resource() currently inserts the new one below the existing one. 
This is wrong because there's no way to insert a resource of the same size
above an existing one.

I took this opportunity to rewrite the initial loop to be a for-loop
instead of a goto-loop and fix the documentation.

Signed-off-by: Matthew Wilcox 
Cc: Ivan Kokshaysky 
Cc: Dominik Brodowski 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

[PATCH] memory hotadd fixes: find_next_system_ram catch range fix

2006-08-06T15:57:48+00:00

find_next_system_ram() is used to find available memory resource at onlining
newly added memory.  This patch fixes following problem.

find_next_system_ram() cannot catch this case.

Resource:      (start)-------------(end)
Section :                (start)-------------(end)

Signed-off-by: KAMEZAWA Hiroyuki 
Cc: Keith Mannthey 
Cc: Yasunori Goto 
Cc: Dave Hansen 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds