linux-toradex.git/kernel/sched.c, branch v3.2.73 Linux kernel for Apalis and Colibri modules sched/core: Fix TASK_DEAD race in finish_task_switch() 2015-11-17T15:54:43+00:00 Peter Zijlstra peterz@infradead.org 2015-09-29T12:45:09+00:00 d4d8ceb528b8d241f8cfe95759ef6afb2e2e262f commit 95913d97914f44db2b81271c2e2ebd4d2ac2df83 upstream. So the problem this patch is trying to address is as follows: CPU0 CPU1 context_switch(A, B) ttwu(A) LOCK A->pi_lock A->on_cpu == 0 finish_task_switch(A) prev_state = A->state <-. WMB | A->on_cpu = 0; | UNLOCK rq0->lock | | context_switch(C, A) `-- A->state = TASK_DEAD prev_state == TASK_DEAD put_task_struct(A) context_switch(A, C) finish_task_switch(A) A->state == TASK_DEAD put_task_struct(A) The argument being that the WMB will allow the load of A->state on CPU0 to cross over and observe CPU1's store of A->state, which will then result in a double-drop and use-after-free. Now the comment states (and this was true once upon a long time ago) that we need to observe A->state while holding rq->lock because that will order us against the wakeup; however the wakeup will not in fact acquire (that) rq->lock; it takes A->pi_lock these days. We can obviously fix this by upgrading the WMB to an MB, but that is expensive, so we'd rather avoid that. The alternative this patch takes is: smp_store_release(&A->on_cpu, 0), which avoids the MB on some archs, but not important ones like ARM. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Cc: manfred@colorfullife.com Cc: will.deacon@arm.com Fixes: e4a52bcb9a18 ("sched: Remove rq->lock from the first half of ttwu()") Link: http://lkml.kernel.org/r/20150929124509.GG3816@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: - Adjust filename - As smp_store_release() is not defined, use smp_mb()] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 95913d97914f44db2b81271c2e2ebd4d2ac2df83 upstream.

So the problem this patch is trying to address is as follows:

        CPU0                            CPU1

        context_switch(A, B)
                                        ttwu(A)
                                          LOCK A->pi_lock
                                          A->on_cpu == 0
        finish_task_switch(A)
          prev_state = A->state  <-.
          WMB                      |
          A->on_cpu = 0;           |
          UNLOCK rq0->lock         |
                                   |    context_switch(C, A)
                                   `--  A->state = TASK_DEAD
          prev_state == TASK_DEAD
            put_task_struct(A)
                                        context_switch(A, C)
                                        finish_task_switch(A)
                                          A->state == TASK_DEAD
                                            put_task_struct(A)

The argument being that the WMB will allow the load of A->state on CPU0
to cross over and observe CPU1's store of A->state, which will then
result in a double-drop and use-after-free.

Now the comment states (and this was true once upon a long time ago)
that we need to observe A->state while holding rq->lock because that
will order us against the wakeup; however the wakeup will not in fact
acquire (that) rq->lock; it takes A->pi_lock these days.

We can obviously fix this by upgrading the WMB to an MB, but that is
expensive, so we'd rather avoid that.

The alternative this patch takes is: smp_store_release(&A->on_cpu, 0),
which avoids the MB on some archs, but not important ones like ARM.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: manfred@colorfullife.com
Cc: will.deacon@arm.com
Fixes: e4a52bcb9a18 ("sched: Remove rq->lock from the first half of ttwu()")
Link: http://lkml.kernel.org/r/20150929124509.GG3816@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2:
 - Adjust filename
 - As smp_store_release() is not defined, use smp_mb()]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
sched: Fix RLIMIT_RTTIME when PI-boosting to RT 2015-05-09T22:16:32+00:00 Brian Silverman brian@peloton-tech.com 2015-02-19T00:23:56+00:00 01e86182d2356449cca1398c8fa0360e5071fd82 commit 746db9443ea57fd9c059f62c4bfbf41cf224fe13 upstream. When non-realtime tasks get priority-inheritance boosted to a realtime scheduling class, RLIMIT_RTTIME starts to apply to them. However, the counter used for checking this (the same one used for SCHED_RR timeslices) was not getting reset. This meant that tasks running with a non-realtime scheduling class which are repeatedly boosted to a realtime one, but never block while they are running realtime, eventually hit the timeout without ever running for a time over the limit. This patch resets the realtime timeslice counter when un-PI-boosting from an RT to a non-RT scheduling class. I have some test code with two threads and a shared PTHREAD_PRIO_INHERIT mutex which induces priority boosting and spins while boosted that gets killed by a SIGXCPU on non-fixed kernels but doesn't with this patch applied. It happens much faster with a CONFIG_PREEMPT_RT kernel, and does happen eventually with PREEMPT_VOLUNTARY kernels. Signed-off-by: Brian Silverman <brian@peloton-tech.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: austin@peloton-tech.com Link: http://lkml.kernel.org/r/1424305436-6716-1-git-send-email-brian@peloton-tech.com Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: adjust filename, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 746db9443ea57fd9c059f62c4bfbf41cf224fe13 upstream.

When non-realtime tasks get priority-inheritance boosted to a realtime
scheduling class, RLIMIT_RTTIME starts to apply to them. However, the
counter used for checking this (the same one used for SCHED_RR
timeslices) was not getting reset. This meant that tasks running with a
non-realtime scheduling class which are repeatedly boosted to a realtime
one, but never block while they are running realtime, eventually hit the
timeout without ever running for a time over the limit. This patch
resets the realtime timeslice counter when un-PI-boosting from an RT to
a non-RT scheduling class.

I have some test code with two threads and a shared PTHREAD_PRIO_INHERIT
mutex which induces priority boosting and spins while boosted that gets
killed by a SIGXCPU on non-fixed kernels but doesn't with this patch
applied. It happens much faster with a CONFIG_PREEMPT_RT kernel, and
does happen eventually with PREEMPT_VOLUNTARY kernels.

Signed-off-by: Brian Silverman <brian@peloton-tech.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: austin@peloton-tech.com
Link: http://lkml.kernel.org/r/1424305436-6716-1-git-send-email-brian@peloton-tech.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: adjust filename, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
sched/autogroup: Fix failure to set cpu.rt_runtime_us 2015-05-09T22:16:18+00:00 Peter Zijlstra peterz@infradead.org 2015-02-09T10:53:18+00:00 59c51ae041f69c207ec77ff836be3b59f8a74472 commit 1fe89e1b6d270aa0d3452c60d38461ea589594e3 upstream. Because task_group() uses a cache of autogroup_task_group(), whose output depends on sched_class, switching classes can generate problems. In particular, when started as fair, the cache points to the autogroup, so when switching to RT the tg_rt_schedulable() test fails for every cpu.rt_{runtime,period}_us change because now the autogroup has tasks and no runtime. Furthermore, going back to the previous semantics of varying task_group() with sched_class has the down-side that the sched_debug output varies as well, even though the task really is in the autogroup. Therefore add an autogroup exception to tg_has_rt_tasks() -- such that both (all) task_group() usages in sched/core now have one. And remove all the remnants of the variable task_group() output. Reported-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Stefan Bader <stefan.bader@canonical.com> Fixes: 8323f26ce342 ("sched: Fix race in task_group()") Link: http://lkml.kernel.org/r/20150209112237.GR5029@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: adjust filenames, context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 1fe89e1b6d270aa0d3452c60d38461ea589594e3 upstream.

Because task_group() uses a cache of autogroup_task_group(), whose
output depends on sched_class, switching classes can generate
problems.

In particular, when started as fair, the cache points to the
autogroup, so when switching to RT the tg_rt_schedulable() test fails
for every cpu.rt_{runtime,period}_us change because now the autogroup
has tasks and no runtime.

Furthermore, going back to the previous semantics of varying
task_group() with sched_class has the down-side that the sched_debug
output varies as well, even though the task really is in the
autogroup.

Therefore add an autogroup exception to tg_has_rt_tasks() -- such that
both (all) task_group() usages in sched/core now have one. And remove
all the remnants of the variable task_group() output.

Reported-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Stefan Bader <stefan.bader@canonical.com>
Fixes: 8323f26ce342 ("sched: Fix race in task_group()")
Link: http://lkml.kernel.org/r/20150209112237.GR5029@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: adjust filenames, context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
sched: Unthrottle rt runqueues in __disable_runtime() 2014-02-15T19:20:18+00:00 Peter Boonstoppel pboonstoppel@nvidia.com 2012-08-09T22:34:47+00:00 4553dab7f3e57b70fee61739325b6ff7bb56ac9b commit a4c96ae319b8047f62dedbe1eac79e321c185749 upstream. migrate_tasks() uses _pick_next_task_rt() to get tasks from the real-time runqueues to be migrated. When rt_rq is throttled _pick_next_task_rt() won't return anything, in which case migrate_tasks() can't move all threads over and gets stuck in an infinite loop. Instead unthrottle rt runqueues before migrating tasks. Additionally: move unthrottle_offline_cfs_rqs() to rq_offline_fair() Signed-off-by: Peter Boonstoppel <pboonstoppel@nvidia.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/5FBF8E85CA34454794F0F7ECBA79798F379D3648B7@HQMAIL04.nvidia.com Signed-off-by: Ingo Molnar <mingo@kernel.org> [ lizf: backported to 3.4: adjust context ] Signed-off-by: Li Zefan <lizefan@huawei.com> [bwh: Backported to 3.2: - Adjust filenames - unthrottle_offline_cfs_rqs() is already static, but defined in sched.c after including sched_fair.c, so add forward declaration - unthrottle_offline_cfs_rqs() also needs to be defined for all CONFIG_SMP configurations now] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit a4c96ae319b8047f62dedbe1eac79e321c185749 upstream.

migrate_tasks() uses _pick_next_task_rt() to get tasks from the
real-time runqueues to be migrated. When rt_rq is throttled
_pick_next_task_rt() won't return anything, in which case
migrate_tasks() can't move all threads over and gets stuck in an
infinite loop.

Instead unthrottle rt runqueues before migrating tasks.

Additionally: move unthrottle_offline_cfs_rqs() to rq_offline_fair()

Signed-off-by: Peter Boonstoppel <pboonstoppel@nvidia.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Turner <pjt@google.com>
Link: http://lkml.kernel.org/r/5FBF8E85CA34454794F0F7ECBA79798F379D3648B7@HQMAIL04.nvidia.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[ lizf: backported to 3.4: adjust context ]
Signed-off-by: Li Zefan <lizefan@huawei.com>
[bwh: Backported to 3.2:
 - Adjust filenames
 - unthrottle_offline_cfs_rqs() is already static, but defined in sched.c
   after including sched_fair.c, so add forward declaration
 - unthrottle_offline_cfs_rqs() also needs to be defined for all CONFIG_SMP
   configurations now]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
sched/debug: Fix sd->*_idx limit range avoiding overflow 2013-05-30T13:35:09+00:00 libin huawei.libin@huawei.com 2013-04-08T06:39:12+00:00 ac93bc6a8ab8b760423ca0c4d42311f0d1f5cfcd commit fd9b86d37a600488dbd80fe60cca46b822bff1cd upstream. Commit 201c373e8e ("sched/debug: Limit sd->*_idx range on sysctl") was an incomplete bug fix. This patch fixes sd->*_idx limit range to [0 ~ CPU_LOAD_IDX_MAX-1] avoiding array overflow caused by setting sd->*_idx to CPU_LOAD_IDX_MAX on sysctl. Signed-off-by: Libin <huawei.libin@huawei.com> Cc: <jiang.liu@huawei.com> Cc: <guohanjun@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/51626610.2040607@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit fd9b86d37a600488dbd80fe60cca46b822bff1cd upstream.

Commit 201c373e8e ("sched/debug: Limit sd->*_idx range on
sysctl") was an incomplete bug fix.

This patch fixes sd->*_idx limit range to [0 ~ CPU_LOAD_IDX_MAX-1]
avoiding array overflow caused by setting sd->*_idx to CPU_LOAD_IDX_MAX
on sysctl.

Signed-off-by: Libin <huawei.libin@huawei.com>
Cc: <jiang.liu@huawei.com>
Cc: <guohanjun@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/51626610.2040607@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
sched/debug: Limit sd->*_idx range on sysctl 2013-05-30T13:35:09+00:00 Namhyung Kim namhyung.kim@lge.com 2012-08-16T08:03:24+00:00 077c9f651e2d46f374ed2103b95ed492c4f4b52b commit 201c373e8e4823700d3160d5c28e1ab18fd1193e upstream. Various sd->*_idx's are used for refering the rq's load average table when selecting a cpu to run. However they can be set to any number with sysctl knobs so that it can crash the kernel if something bad is given. Fix it by limiting them into the actual range. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1345104204-8317-1-git-send-email-namhyung@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: - Adjust filename - s/umode_t/mode_t/] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 201c373e8e4823700d3160d5c28e1ab18fd1193e upstream.

Various sd->*_idx's are used for refering the rq's load average table
when selecting a cpu to run.  However they can be set to any number
with sysctl knobs so that it can crash the kernel if something bad is
given. Fix it by limiting them into the actual range.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1345104204-8317-1-git-send-email-namhyung@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2:
 - Adjust filename
 - s/umode_t/mode_t/]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s 2013-04-25T19:25:51+00:00 Tejun Heo tj@kernel.org 2013-03-18T19:22:34+00:00 a2fdf1676265df57ca25b9aa7981d458a045f44d commit 383efcd00053ec40023010ce5034bd702e7ab373 upstream. try_to_wake_up_local() should only be invoked to wake up another task in the same runqueue and BUG_ON()s are used to enforce the rule. Missing try_to_wake_up_local() can stall workqueue execution but such stalls are likely to be finite either by another work item being queued or the one blocked getting unblocked. There's no reason to trigger BUG while holding rq lock crashing the whole system. Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20130318192234.GD3042@htj.dyndns.org Signed-off-by: Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 383efcd00053ec40023010ce5034bd702e7ab373 upstream.

try_to_wake_up_local() should only be invoked to wake up another
task in the same runqueue and BUG_ON()s are used to enforce the
rule. Missing try_to_wake_up_local() can stall workqueue
execution but such stalls are likely to be finite either by
another work item being queued or the one blocked getting
unblocked.  There's no reason to trigger BUG while holding rq
lock crashing the whole system.

Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130318192234.GD3042@htj.dyndns.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
wake_up_process() should be never used to wakeup a TASK_STOPPED/TRACED task 2013-02-20T03:15:30+00:00 Oleg Nesterov oleg@redhat.com 2013-01-21T19:48:17+00:00 8957028bd89221048c784d524ee42513356fc822 commit 9067ac85d533651b98c2ff903182a20cbb361fcb upstream. wake_up_process() should never wakeup a TASK_STOPPED/TRACED task. Change it to use TASK_NORMAL and add the WARN_ON(). TASK_ALL has no other users, probably can be killed. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit 9067ac85d533651b98c2ff903182a20cbb361fcb upstream.

wake_up_process() should never wakeup a TASK_STOPPED/TRACED task.
Change it to use TASK_NORMAL and add the WARN_ON().

TASK_ALL has no other users, probably can be killed.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
CPU hotplug, cpusets, suspend: Don't modify cpusets during suspend/resume 2012-10-10T02:31:14+00:00 Srivatsa S. Bhat srivatsa.bhat@linux.vnet.ibm.com 2012-05-24T14:16:26+00:00 93034429eba1b31cc4c017c28c9677e199931dcf commit d35be8bab9b0ce44bed4b9453f86ebf64062721e upstream. In the event of CPU hotplug, the kernel modifies the cpusets' cpus_allowed masks as and when necessary to ensure that the tasks belonging to the cpusets have some place (online CPUs) to run on. And regular CPU hotplug is destructive in the sense that the kernel doesn't remember the original cpuset configurations set by the user, across hotplug operations. However, suspend/resume (which uses CPU hotplug) is a special case in which the kernel has the responsibility to restore the system (during resume), to exactly the same state it was in before suspend. In order to achieve that, do the following: 1. Don't modify cpusets during suspend/resume. At all. In particular, don't move the tasks from one cpuset to another, and don't modify any cpuset's cpus_allowed mask. So, simply ignore cpusets during the CPU hotplug operations that are carried out in the suspend/resume path. 2. However, cpusets and sched domains are related. We just want to avoid altering cpusets alone. So, to keep the sched domains updated, build a single sched domain (containing all active cpus) during each of the CPU hotplug operations carried out in s/r path, effectively ignoring the cpusets' cpus_allowed masks. (Since userspace is frozen while doing all this, it will go unnoticed.) 3. During the last CPU online operation during resume, build the sched domains by looking up the (unaltered) cpusets' cpus_allowed masks. That will bring back the system to the same original state as it was in before suspend. Ultimately, this will not only solve the cpuset problem related to suspend resume (ie., restores the cpusets to exactly what it was before suspend, by not touching it at all) but also speeds up suspend/resume because we avoid running cpuset update code for every CPU being offlined/onlined. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20120524141611.3692.20155.stgit@srivatsabhat.in.ibm.com [Preeti U Murthy: Please apply this patch to the stable tree 3.0.y] Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit d35be8bab9b0ce44bed4b9453f86ebf64062721e upstream.

In the event of CPU hotplug, the kernel modifies the cpusets' cpus_allowed
masks as and when necessary to ensure that the tasks belonging to the cpusets
have some place (online CPUs) to run on. And regular CPU hotplug is
destructive in the sense that the kernel doesn't remember the original cpuset
configurations set by the user, across hotplug operations.

However, suspend/resume (which uses CPU hotplug) is a special case in which
the kernel has the responsibility to restore the system (during resume), to
exactly the same state it was in before suspend.

In order to achieve that, do the following:

1. Don't modify cpusets during suspend/resume. At all.
   In particular, don't move the tasks from one cpuset to another, and
   don't modify any cpuset's cpus_allowed mask. So, simply ignore cpusets
   during the CPU hotplug operations that are carried out in the
   suspend/resume path.

2. However, cpusets and sched domains are related. We just want to avoid
   altering cpusets alone. So, to keep the sched domains updated, build
   a single sched domain (containing all active cpus) during each of the
   CPU hotplug operations carried out in s/r path, effectively ignoring
   the cpusets' cpus_allowed masks.

   (Since userspace is frozen while doing all this, it will go unnoticed.)

3. During the last CPU online operation during resume, build the sched
   domains by looking up the (unaltered) cpusets' cpus_allowed masks.
   That will bring back the system to the same original state as it was in
   before suspend.

Ultimately, this will not only solve the cpuset problem related to suspend
resume (ie., restores the cpusets to exactly what it was before suspend, by
not touching it at all) but also speeds up suspend/resume because we avoid
running cpuset update code for every CPU being offlined/onlined.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20120524141611.3692.20155.stgit@srivatsabhat.in.ibm.com
[Preeti U Murthy: Please apply this patch to the stable tree 3.0.y]
Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
sched: fix divide by zero at {thread_group,task}_times 2012-09-12T02:36:59+00:00 Stanislaw Gruszka sgruszka@redhat.com 2012-08-08T09:27:15+00:00 097e2f40cbca70422ade38ea61d72c3b8566f14d commit bea6832cc8c4a0a9a65dd17da6aaa657fe27bc3e upstream. On architectures where cputime_t is 64 bit type, is possible to trigger divide by zero on do_div(temp, (__force u32) total) line, if total is a non zero number but has lower 32 bit's zeroed. Removing casting is not a good solution since some do_div() implementations do cast to u32 internally. This problem can be triggered in practice on very long lived processes: PID: 2331 TASK: ffff880472814b00 CPU: 2 COMMAND: "oraagent.bin" #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2 #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00 #3 [ffff880472a51cd0] die at ffffffff8100f26b #4 [ffff880472a51d00] do_trap at ffffffff814f03f4 #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff #6 [ffff880472a51e00] divide_error at ffffffff8100be7b [exception RIP: thread_group_times+0x56] RIP: ffffffff81056a16 RSP: ffff880472a51eb8 RFLAGS: 00010046 RAX: bc3572c9fe12d194 RBX: ffff880874150800 RCX: 0000000110266fad RDX: 0000000000000000 RSI: ffff880472a51eb8 RDI: 001038ae7d9633dc RBP: ffff880472a51ef8 R8: 00000000b10a3a64 R9: ffff880874150800 R10: 00007fcba27ab680 R11: 0000000000000202 R12: ffff880472a51f08 R13: ffff880472a51f10 R14: 0000000000000000 R15: 0000000000000007 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d #8 [ffff880472a51f40] sys_times at ffffffff81088524 #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2 RIP: 0000003808caac3a RSP: 00007fcba27ab6d8 RFLAGS: 00000202 RAX: 0000000000000064 RBX: ffffffff8100b0f2 RCX: 0000000000000000 RDX: 00007fcba27ab6e0 RSI: 000000000076d58e RDI: 00007fcba27ab6e0 RBP: 00007fcba27ab700 R8: 0000000000000020 R9: 000000000000091b R10: 00007fcba27ab680 R11: 0000000000000202 R12: 00007fff9ca41940 R13: 0000000000000000 R14: 00007fcba27ac9c0 R15: 00007fff9ca41940 ORIG_RAX: 0000000000000064 CS: 0033 SS: 002b Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: - Adjust filename - Most conversions in the original code are implicit] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 
commit bea6832cc8c4a0a9a65dd17da6aaa657fe27bc3e upstream.

On architectures where cputime_t is 64 bit type, is possible to trigger
divide by zero on do_div(temp, (__force u32) total) line, if total is a
non zero number but has lower 32 bit's zeroed. Removing casting is not
a good solution since some do_div() implementations do cast to u32
internally.

This problem can be triggered in practice on very long lived processes:

  PID: 2331   TASK: ffff880472814b00  CPU: 2   COMMAND: "oraagent.bin"
   #0 [ffff880472a51b70] machine_kexec at ffffffff8103214b
   #1 [ffff880472a51bd0] crash_kexec at ffffffff810b91c2
   #2 [ffff880472a51ca0] oops_end at ffffffff814f0b00
   #3 [ffff880472a51cd0] die at ffffffff8100f26b
   #4 [ffff880472a51d00] do_trap at ffffffff814f03f4
   #5 [ffff880472a51d60] do_divide_error at ffffffff8100cfff
   #6 [ffff880472a51e00] divide_error at ffffffff8100be7b
      [exception RIP: thread_group_times+0x56]
      RIP: ffffffff81056a16  RSP: ffff880472a51eb8  RFLAGS: 00010046
      RAX: bc3572c9fe12d194  RBX: ffff880874150800  RCX: 0000000110266fad
      RDX: 0000000000000000  RSI: ffff880472a51eb8  RDI: 001038ae7d9633dc
      RBP: ffff880472a51ef8   R8: 00000000b10a3a64   R9: ffff880874150800
      R10: 00007fcba27ab680  R11: 0000000000000202  R12: ffff880472a51f08
      R13: ffff880472a51f10  R14: 0000000000000000  R15: 0000000000000007
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
   #7 [ffff880472a51f00] do_sys_times at ffffffff8108845d
   #8 [ffff880472a51f40] sys_times at ffffffff81088524
   #9 [ffff880472a51f80] system_call_fastpath at ffffffff8100b0f2
      RIP: 0000003808caac3a  RSP: 00007fcba27ab6d8  RFLAGS: 00000202
      RAX: 0000000000000064  RBX: ffffffff8100b0f2  RCX: 0000000000000000
      RDX: 00007fcba27ab6e0  RSI: 000000000076d58e  RDI: 00007fcba27ab6e0
      RBP: 00007fcba27ab700   R8: 0000000000000020   R9: 000000000000091b
      R10: 00007fcba27ab680  R11: 0000000000000202  R12: 00007fff9ca41940
      R13: 0000000000000000  R14: 00007fcba27ac9c0  R15: 00007fff9ca41940
      ORIG_RAX: 0000000000000064  CS: 0033  SS: 002b

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20120808092714.GA3580@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[bwh: Backported to 3.2:
 - Adjust filename
 - Most conversions in the original code are implicit]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>