linux-toradex.git/kernel/sched, branch v5.2-rc2

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have EXPORT_.*_SYMBOL_GPL inside which was used in the
   initial scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

kernel/sched/psi.c: expose pressure metrics on root cgroup

2019-05-15T02:52:48+00:00

Pressure metrics are already recorded and exposed in procfs for the
entire system, but any tool which monitors cgroup pressure has to
special case the root cgroup to read from procfs.  This patch exposes
the already recorded pressure metrics on the root cgroup.

Link: http://lkml.kernel.org/r/20190510174938.3361741-1-dschatzberg@fb.com
Signed-off-by: Dan Schatzberg 
Acked-by: Johannes Weiner 
Cc: Tejun Heo 
Cc: Li Zefan 
Cc: Ingo Molnar 
Cc: Peter Zijlstra 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

psi: introduce psi monitor

2019-05-15T02:52:48+00:00

Psi monitor aims to provide a low-latency short-term pressure detection
mechanism configurable by users.  It allows users to monitor psi metrics
growth and trigger events whenever a metric raises above user-defined
threshold within user-defined time window.

Time window and threshold are both expressed in usecs.  Multiple psi
resources with different thresholds and window sizes can be monitored
concurrently.

Psi monitors activate when system enters stall state for the monitored
psi metric and deactivate upon exit from the stall state.  While system
is in the stall state psi signal growth is monitored at a rate of 10
times per tracking window.  Min window size is 500ms, therefore the min
monitoring interval is 50ms.  Max window size is 10s with monitoring
interval of 1s.

When activated psi monitor stays active for at least the duration of one
tracking window to avoid repeated activations/deactivations when psi
signal is bouncing.

Notifications to the users are rate-limited to one per tracking window.

Link: http://lkml.kernel.org/r/20190319235619.260832-8-surenb@google.com
Signed-off-by: Suren Baghdasaryan 
Signed-off-by: Johannes Weiner 
Cc: Dennis Zhou 
Cc: Ingo Molnar 
Cc: Jens Axboe 
Cc: Li Zefan 
Cc: Peter Zijlstra 
Cc: Tejun Heo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

psi: track changed states

2019-05-15T02:52:48+00:00

Introduce changed_states parameter into collect_percpu_times to track
the states changed since the last update.

This will be needed to detect whether polled states activated in the
monitor patch.

Link: http://lkml.kernel.org/r/20190319235619.260832-6-surenb@google.com
Signed-off-by: Suren Baghdasaryan 
Acked-by: Johannes Weiner 
Cc: Dennis Zhou 
Cc: Ingo Molnar 
Cc: Jens Axboe 
Cc: Li Zefan 
Cc: Peter Zijlstra 
Cc: Tejun Heo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

psi: split update_stats into parts

2019-05-15T02:52:47+00:00

Split update_stats into collect_percpu_times and update_averages for
collect_percpu_times to be reused later inside psi monitor.

Link: http://lkml.kernel.org/r/20190319235619.260832-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan 
Acked-by: Johannes Weiner 
Cc: Dennis Zhou 
Cc: Ingo Molnar 
Cc: Jens Axboe 
Cc: Li Zefan 
Cc: Peter Zijlstra 
Cc: Tejun Heo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

psi: rename psi fields in preparation for psi trigger addition

2019-05-15T02:52:47+00:00

Rename psi_group structure member fields used for calculating psi totals
and averages for clear distinction between them and for trigger-related
fields that will be added by "psi: introduce psi monitor".

[surenb@google.com: v6]
  Link: http://lkml.kernel.org/r/20190319235619.260832-4-surenb@google.com
Link: http://lkml.kernel.org/r/20190124211518.244221-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan 
Acked-by: Johannes Weiner 
Cc: Dennis Zhou 
Cc: Ingo Molnar 
Cc: Jens Axboe 
Cc: Li Zefan 
Cc: Peter Zijlstra 
Cc: Tejun Heo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

psi: make psi_enable static

2019-05-15T02:52:47+00:00

psi_enable is not used outside of psi.c, make it static.

Link: http://lkml.kernel.org/r/20190319235619.260832-3-surenb@google.com
Signed-off-by: Suren Baghdasaryan 
Suggested-by: Andrew Morton 
Acked-by: Johannes Weiner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

psi: introduce state_mask to represent stalled psi states

2019-05-15T02:52:47+00:00

Patch series "psi: pressure stall monitors", v6.

This is a respin of:
  https://lwn.net/ml/linux-kernel/20190308184311.144521-1-surenb%40google.com/

Android is adopting psi to detect and remedy memory pressure that
results in stuttering and decreased responsiveness on mobile devices.

Psi gives us the stall information, but because we're dealing with
latencies in the millisecond range, periodically reading the pressure
files to detect stalls in a timely fashion is not feasible.  Psi also
doesn't aggregate its averages at a high-enough frequency right now.

This patch series extends the psi interface such that users can
configure sensitive latency thresholds and use poll() and friends to be
notified when these are breached.

As high-frequency aggregation is costly, it implements an aggregation
method that is optimized for fast, short-interval averaging, and makes
the aggregation frequency adaptive, such that high-frequency updates
only happen while monitored stall events are actively occurring.

With these patches applied, Android can monitor for, and ward off,
mounting memory shortages before they cause problems for the user.  For
example, using memory stall monitors in userspace low memory killer
daemon (lmkd) we can detect mounting pressure and kill less important
processes before device becomes visibly sluggish.  In our memory stress
testing psi memory monitors produce roughly 10x less false positives
compared to vmpressure signals.  Having ability to specify multiple
triggers for the same psi metric allows other parts of Android framework
to monitor memory state of the device and act accordingly.

The new interface is straight-forward.  The user opens one of the
pressure files for writing and writes a trigger description into the
file descriptor that defines the stall state - some or full, and the
maximum stall time over a given window of time.  E.g.:

        /* Signal when stall time exceeds 100ms of a 1s window */
        char trigger[] = "full 100000 1000000"
        fd = open("/proc/pressure/memory")
        write(fd, trigger, sizeof(trigger))
        while (poll() >= 0) {
                ...
        };
        close(fd);

When the monitored stall state is entered, psi adapts its aggregation
frequency according to what the configured time window requires in order
to emit event signals in a timely fashion.  Once the stalling subsides,
aggregation reverts back to normal.

The trigger is associated with the open file descriptor.  To stop
monitoring, the user only needs to close the file descriptor and the
trigger is discarded.

Patches 1-6 prepare the psi code for polling support.  Patch 7
implements the adaptive polling logic, the pressure growth detection
optimized for short intervals, and hooks up write() and poll() on the
pressure files.

The patches were developed in collaboration with Johannes Weiner.

This patch (of 7):

The psi monitoring patches will need to determine the same states as
record_times().  To avoid calculating them twice, maintain a state mask
that can be consulted cheaply.  Do this in a separate patch to keep the
churn in the main feature patch at a minimum.

This adds 4-byte state_mask member into psi_group_cpu struct which
results in its first cacheline-aligned part becoming 52 bytes long.  Add
explicit values to enumeration element counters that affect
psi_group_cpu struct size.

Link: http://lkml.kernel.org/r/20190124211518.244221-4-surenb@google.com
Signed-off-by: Suren Baghdasaryan 
Acked-by: Johannes Weiner 
Cc: Dennis Zhou 
Cc: Ingo Molnar 
Cc: Jens Axboe 
Cc: Li Zefan 
Cc: Peter Zijlstra 
Cc: Tejun Heo 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-05-07T20:01:40+00:00

Pull driver core/kobject updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.2-rc1

  There are a number of ACPI patches in here as well, as Rafael said
  they should go through this tree due to the driver core changes they
  required. They have all been acked by the ACPI developers.

  There are also a number of small subsystem-specific changes in here,
  due to some changes to the kobject core code. Those too have all been
  acked by the various subsystem maintainers.

  As for content, it's pretty boring outside of the ACPI changes:
   - spdx cleanups
   - kobject documentation updates
   - default attribute groups for kobjects
   - other minor kobject/driver core fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits)
  kobject: clean up the kobject add documentation a bit more
  kobject: Fix kernel-doc comment first line
  kobject: Remove docstring reference to kset
  firmware_loader: Fix a typo ("syfs" -> "sysfs")
  kobject: fix dereference before null check on kobj
  Revert "driver core: platform: Fix the usage of platform device name(pdev->name)"
  init/config: Do not select BUILD_BIN2C for IKCONFIG
  Provide in-kernel headers to make extending kernel easier
  kobject: Improve doc clarity kobject_init_and_add()
  kobject: Improve docs for kobject_add/del
  driver core: platform: Fix the usage of platform device name(pdev->name)
  livepatch: Replace klp_ktype_patch's default_attrs with groups
  cpufreq: schedutil: Replace default_attrs field with groups
  padata: Replace padata_attr_type default_attrs field with groups
  irqdesc: Replace irq_kobj_type's default_attrs field with groups
  net-sysfs: Replace ktype default_attrs field with groups
  block: Replace all ktype default_attrs with groups
  samples/kobject: Replace foo_ktype's default_attrs field with groups
  kobject: Add support for default attribute groups to kobj_type
  driver core: Postpone DMA tear-down until after devres release for probe failure
  ...

Merge tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2019-05-07T02:40:31+00:00

Pull power management updates from Rafael Wysocki:
 "These fix the (Intel-specific) Performance and Energy Bias Hint (EPB)
  handling and expose it to user space via sysfs, fix and clean up
  several cpufreq drivers, add support for two new chips to the qoriq
  cpufreq driver, fix, simplify and clean up the cpufreq core and the
  schedutil governor, add support for "CPU" domains to the generic power
  domains (genpd) framework and provide low-level PSCI firmware support
  for that feature, fix the exynos cpuidle driver and fix a couple of
  issues in the devfreq subsystem and clean it up.

  Specifics:

   - Fix the handling of Performance and Energy Bias Hint (EPB) on Intel
     processors and expose it to user space via sysfs to avoid having to
     access it through the generic MSR I/F (Rafael Wysocki).

   - Improve the handling of global turbo changes made by the platform
     firmware in the intel_pstate driver (Rafael Wysocki).

   - Convert some slow-path static_cpu_has() callers to boot_cpu_has()
     in cpufreq (Borislav Petkov).

   - Fix the frequency calculation loop in the armada-37xx cpufreq
     driver (Gregory CLEMENT).

   - Fix possible object reference leaks in multuple cpufreq drivers
     (Wen Yang).

   - Fix kerneldoc comment in the centrino cpufreq driver (dongjian).

   - Clean up the ACPI and maple cpufreq drivers (Viresh Kumar, Mohan
     Kumar).

   - Add support for lx2160a and ls1028a to the qoriq cpufreq driver
     (Vabhav Sharma, Yuantian Tang).

   - Fix kobject memory leak in the cpufreq core (Viresh Kumar).

   - Simplify the IOwait boosting in the schedutil cpufreq governor and
     rework the TSC cpufreq notifier on x86 (Rafael Wysocki).

   - Clean up the cpufreq core and statistics code (Yue Hu, Kyle Lin).

   - Improve the cpufreq documentation, add SPDX license tags to some PM
     documentation files and unify copyright notices in them (Rafael
     Wysocki).

   - Add support for "CPU" domains to the generic power domains (genpd)
     framework and provide low-level PSCI firmware support for that
     feature (Ulf Hansson).

   - Rearrange the PSCI firmware support code and add support for
     SYSTEM_RESET2 to it (Ulf Hansson, Sudeep Holla).

   - Improve genpd support for devices in multiple power domains (Ulf
     Hansson).

   - Unify target residency for the AFTR and coupled AFTR states in the
     exynos cpuidle driver (Marek Szyprowski).

   - Introduce new helper routine in the operating performance points
     (OPP) framework (Andrew-sh.Cheng).

   - Add support for passing on-die termination (ODT) and auto power
     down parameters from the kernel to Trusted Firmware-A (TF-A) to the
     rk3399_dmc devfreq driver (Enric Balletbo i Serra).

   - Add tracing to devfreq (Lukasz Luba).

   - Make the exynos-bus devfreq driver suspend all devices on system
     shutdown (Marek Szyprowski).

   - Fix a few minor issues in the devfreq subsystem and clean it up
     somewhat (Enric Balletbo i Serra, MyungJoo Ham, Rob Herring,
     Saravana Kannan, Yangtao Li).

   - Improve system wakeup diagnostics (Stephen Boyd).

   - Rework filesystem sync messages emitted during system suspend and
     hibernation (Harry Pan)"

* tag 'pm-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
  cpufreq: Fix kobject memleak
  cpufreq: armada-37xx: fix frequency calculation for opp
  cpufreq: centrino: Fix centrino_setpolicy() kerneldoc comment
  cpufreq: qoriq: add support for lx2160a
  x86: tsc: Rework time_cpufreq_notifier()
  PM / Domains: Allow to attach a CPU via genpd_dev_pm_attach_by_id|name()
  PM / Domains: Search for the CPU device outside the genpd lock
  PM / Domains: Drop unused in-parameter to some genpd functions
  PM / Domains: Use the base device for driver_deferred_probe_check_state()
  cpufreq: qoriq: Add ls1028a chip support
  PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain
  PM / Domains: Allow OF lookup for multi PM domain case from ->attach_dev()
  PM / Domains: Don't kfree() the virtual device in the error path
  cpufreq: Move ->get callback check outside of __cpufreq_get()
  PM / Domains: remove unnecessary unlikely()
  cpufreq: Remove needless bios_limit check in show_bios_limit()
  drivers/cpufreq/acpi-cpufreq.c: This fixes the following checkpatch warning
  firmware/psci: add support for SYSTEM_RESET2
  PM / devfreq: add tracing for scheduling work
  trace: events: add devfreq trace event file
  ...