linux-toradex.git/kernel/signal.c, branch v5.5

cgroup: freezer: call cgroup_enter_frozen() with preemption disabled in ptrace_stop()

2019-10-11T15:39:57+00:00

ptrace_stop() does preempt_enable_no_resched() to avoid the preemption,
but after that cgroup_enter_frozen() does spin_lock/unlock and this adds
another preemption point.

Reported-and-tested-by: Bruce Ashfield 
Fixes: 76f969e8948d ("cgroup: cgroup v2 freezer")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Oleg Nesterov 
Acked-by: Roman Gushchin 
Signed-off-by: Tejun Heo

Merge tag 'core-process-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

2019-09-16T16:28:19+00:00

Pull pidfd/waitid updates from Christian Brauner:
 "This contains two features and various tests.

  First, it adds support for waiting on process through pidfds by adding
  the P_PIDFD type to the waitid() syscall. This completes the basic
  functionality of the pidfd api (cf. [1]). In the meantime we also have
  a new adition to the userspace projects that make use of the pidfd
  api. The qt project was nice enough to send a mail pointing out that
  they have a pr up to switch to the pidfd api (cf. [2]).

  Second, this tag contains an extension to the waitid() syscall to make
  it possible to wait on the current process group in a race free manner
  (even though the actual problem is very unlikely) by specifing 0
  together with the P_PGID type. This extension traces back to a
  discussion on the glibc development mailing list.

  There are also a range of tests for the features above. Additionally,
  the test-suite which detected the pidfd-polling race we fixed in [3]
  is included in this tag"

[1] https://lwn.net/Articles/794707/
[2] https://codereview.qt-project.org/c/qt/qtbase/+/108456
[3] commit b191d6491be6 ("pidfd: fix a poll race when setting exit_state")

* tag 'core-process-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  waitid: Add support for waiting for the current process group
  tests: add pidfd poll tests
  tests: move common definitions and functions into pidfd.h
  pidfd: add pidfd_wait tests
  pidfd: add P_PIDFD to waitid()

signal: Allow cifs and drbd to receive their terminating signals

2019-08-19T11:34:13+00:00

My recent to change to only use force_sig for a synchronous events
wound up breaking signal reception cifs and drbd.  I had overlooked
the fact that by default kthreads start out with all signals set to
SIG_IGN.  So a change I thought was safe turned out to have made it
impossible for those kernel thread to catch their signals.

Reverting the work on force_sig is a bad idea because what the code
was doing was very much a misuse of force_sig.  As the way force_sig
ultimately allowed the signal to happen was to change the signal
handler to SIG_DFL.  Which after the first signal will allow userspace
to send signals to these kernel threads.  At least for
wake_ack_receiver in drbd that does not appear actively wrong.

So correct this problem by adding allow_kernel_signal that will allow
signals whose siginfo reports they were sent by the kernel through,
but will not allow userspace generated signals, and update cifs and
drbd to call allow_kernel_signal in an appropriate place so that their
thread can receive this signal.

Fixing things this way ensures that userspace won't be able to send
signals and cause problems, that it is clear which signals the
threads are expecting to receive, and it guarantees that nothing
else in the system will be affected.

This change was partly inspired by similar cifs and drbd patches that
added allow_signal.

Reported-by: ronnie sahlberg 
Reported-by: Christoph Böhmwalder 
Tested-by: Christoph Böhmwalder 
Cc: Steve French 
Cc: Philipp Reisner 
Cc: David Laight 
Fixes: 247bc9470b1e ("cifs: fix rmmod regression in cifs.ko caused by force_sig changes")
Fixes: 72abe3bcf091 ("signal/cifs: Fix cifs_put_tcp_session to call send_sig instead of force_sig")
Fixes: fee109901f39 ("signal/drbd: Use send_sig not force_sig")
Fixes: 3cf5d076fb4d ("signal: Remove task parameter from force_sig")
Signed-off-by: "Eric W. Biederman"

kernel/signal.c: fix a kernel-doc markup

2019-08-03T14:02:00+00:00

The kernel-doc parser doesn't handle expressions with %foo*.  Instead,
when an asterisk should be part of a constant, it uses an alternative
notation: `foo*`.

Link: http://lkml.kernel.org/r/7f18c2e0b5e39e6b7eb55ddeb043b8b260b49f2d.1563361575.git.mchehab+samsung@kernel.org
Signed-off-by: Mauro Carvalho Chehab 
Cc: Deepa Dinamani 
Cc: Jonathan Corbet 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

pidfd: add P_PIDFD to waitid()

2019-08-01T19:49:46+00:00

This adds the P_PIDFD type to waitid().
One of the last remaining bits for the pidfd api is to make it possible
to wait on pidfds. With P_PIDFD added to waitid() the parts of userspace
that want to use the pidfd api to exclusively manage processes can do so
now.

One of the things this will unblock in the future is the ability to make
it possible to retrieve the exit status via waitid(P_PIDFD) for
non-parent processes if handed a _suitable_ pidfd that has this feature
set. This is similar to what you can do on FreeBSD with kqueue(). It
might even end up being possible to wait on a process as a non-parent if
an appropriate property is enabled on the pidfd.

With P_PIDFD no scoping of the process identified by the pidfd is
possible, i.e. it explicitly blocks things such as wait4(-1), wait4(0),
waitid(P_ALL), waitid(P_PGID) etc. It only allows for semantics
equivalent to wait4(pid), waitid(P_PID). Users that need scoping should
rely on pid-based wait*() syscalls for now.

Signed-off-by: Christian Brauner 
Reviewed-by: Kees Cook 
Reviewed-by: Oleg Nesterov 
Cc: Arnd Bergmann 
Cc: "Eric W. Biederman" 
Cc: Joel Fernandes (Google) 
Cc: Thomas Gleixner 
Cc: David Howells 
Cc: Jann Horn 
Cc: Andy Lutomirsky 
Cc: Andrew Morton 
Cc: Aleksa Sarai 
Cc: Linus Torvalds 
Cc: Al Viro 
Link: https://lore.kernel.org/r/20190727222229.6516-2-christian@brauner.io

pidfd: Add warning if exit_state is 0 during notification

2019-07-29T15:20:19+00:00

Previously a condition got missed where the pidfd waiters are awakened
before the exit_state gets set. This can result in a missed notification
[1] and the polling thread waiting forever.

It is fixed now, however it would be nice to avoid this kind of issue
going unnoticed in the future. So just add a warning to catch it in the
future.

/* References */
[1]: https://lore.kernel.org/lkml/20190717172100.261204-1-joel@joelfernandes.org/

Signed-off-by: Joel Fernandes (Google) 
Link: https://lore.kernel.org/r/20190724164816.201099-1-joel@joelfernandes.org
Signed-off-by: Christian Brauner

signal: simplify set_user_sigmask/restore_user_sigmask

2019-07-17T02:23:24+00:00

task->saved_sigmask and ->restore_sigmask are only used in the ret-from-
syscall paths.  This means that set_user_sigmask() can save ->blocked in
->saved_sigmask and do set_restore_sigmask() to indicate that ->blocked
was modified.

This way the callers do not need 2 sigset_t's passed to set/restore and
restore_user_sigmask() renamed to restore_saved_sigmask_unless() turns
into the trivial helper which just calls restore_saved_sigmask().

Link: http://lkml.kernel.org/r/20190606113206.GA9464@redhat.com
Signed-off-by: Oleg Nesterov 
Cc: Deepa Dinamani 
Cc: Arnd Bergmann 
Cc: Jens Axboe 
Cc: Davidlohr Bueso 
Cc: Eric Wong 
Cc: Jason Baron 
Cc: Thomas Gleixner 
Cc: Al Viro 
Cc: Eric W. Biederman 
Cc: David Laight 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Merge tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

2019-07-11T05:17:21+00:00

Pull pidfd updates from Christian Brauner:
"This adds two main features.

- First, it adds polling support for pidfds. This allows process
managers to know when a (non-parent) process dies in a race-free
way.

The notification mechanism used follows the same logic that is
currently used when the parent of a task is notified of a child's
death. With this patchset it is possible to put pidfds in an
{e}poll loop and get reliable notifications for process (i.e.
thread-group) exit.

- The second feature compliments the first one by making it possible
to retrieve pollable pidfds for processes that were not created
using CLONE_PIDFD.

A lot of processes get created with traditional PID-based calls
such as fork() or clone() (without CLONE_PIDFD). For these
processes a caller can currently not create a pollable pidfd. This
is a problem for Android's low memory killer (LMK) and service
managers such as systemd.

Both patchsets are accompanied by selftests.

It's perhaps worth noting that the work done so far and the work done
in this branch for pidfd_open() and polling support do already see
some adoption:

- Android is in the process of backporting this work to all their LTS
kernels [1]

- Service managers make use of pidfd_send_signal but will need to
wait until we enable waiting on pidfds for full adoption.

- And projects I maintain make use of both pidfd_send_signal and
CLONE_PIDFD [2] and will use polling support and pidfd_open() too"

[1] https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.9+backport%22
https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.14+backport%22
https://android-review.googlesource.com/q/topic:%22pidfd+polling+support+4.19+backport%22

[2] https://github.com/lxc/lxc/blob/aab6e3eb73c343231cdde775db938994fc6f2803/src/lxc/start.c#L1753

* tag 'pidfd-updates-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: add pidfd_open() tests
arch: wire-up pidfd_open()
pid: add pidfd_open()
pidfd: add polling selftests
pidfd: add polling support

Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2019-07-09T04:48:15+00:00

Pull force_sig() argument change from Eric Biederman:
 "A source of error over the years has been that force_sig has taken a
  task parameter when it is only safe to use force_sig with the current
  task.

  The force_sig function is built for delivering synchronous signals
  such as SIGSEGV where the userspace application caused a synchronous
  fault (such as a page fault) and the kernel responded with a signal.

  Because the name force_sig does not make this clear, and because the
  force_sig takes a task parameter the function force_sig has been
  abused for sending other kinds of signals over the years. Slowly those
  have been fixed when the oopses have been tracked down.

  This set of changes fixes the remaining abusers of force_sig and
  carefully rips out the task parameter from force_sig and friends
  making this kind of error almost impossible in the future"

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
  signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
  signal: Remove the signal number and task parameters from force_sig_info
  signal: Factor force_sig_info_to_task out of force_sig_info
  signal: Generate the siginfo in force_sig
  signal: Move the computation of force into send_signal and correct it.
  signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
  signal: Remove the task parameter from force_sig_fault
  signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
  signal: Explicitly call force_sig_fault on current
  signal/unicore32: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from __do_user_fault
  signal/arm: Remove tsk parameter from ptrace_break
  signal/nds32: Remove tsk parameter from send_sigtrap
  signal/riscv: Remove tsk parameter from do_trap
  signal/sh: Remove tsk parameter from force_sig_info_fault
  signal/um: Remove task parameter from send_sigtrap
  signal/x86: Remove task parameter from send_sigtrap
  signal: Remove task parameter from force_sig_mceerr
  signal: Remove task parameter from force_sig
  signal: Remove task parameter from force_sigsegv
  ...

Merge tag 'audit-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit

2019-07-09T01:55:42+00:00

Pull audit updates from Paul Moore:
 "This pull request is a bit early, but with some vacation time coming
  up I wanted to send this out now just in case the remote Internet Gods
  decide not to smile on me once the merge window opens. The patchset
  for v5.3 is pretty minor this time, the highlights include:

   - When the audit daemon is sent a signal, ensure we deliver
     information about the sender even when syscall auditing is not
     enabled/supported.

   - Add the ability to filter audit records based on network address
     family.

   - Tighten the audit field filtering restrictions on string based
     fields.

   - Cleanup the audit field filtering verification code.

   - Remove a few BUG() calls from the audit code"

* tag 'audit-pr-20190702' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: remove the BUG() calls in the audit rule comparison functions
  audit: enforce op for string fields
  audit: add saddr_fam filter field
  audit: re-structure audit field valid checks
  audit: deliver signal_info regarless of syscall