linux-toradex.git/kernel/time.c, branch v2.6.27.10

Make constants in kernel/timeconst.h fixed 64 bits

2008-05-02T23:18:42+00:00

Force constants in kernel/timeconst.h (except shift counts) to be 64 bits,
using U64_C() constructor macros, and eliminate constants that cannot
be represented at all in 64 bits.  This avoids warnings with some gcc
versions.

Drop generating 64-bit constants, since we have no real hope of
getting a full set (operation on 64-bit values requires a 128-bit
intermediate result, which gcc only supports on 64-bit platforms, and
only with libgcc support on some.)  Note that the use of these
constants does not depend on if we are on a 32- or 64-bit architecture.

This resolves Bugzilla 10153.

Signed-off-by: H. Peter Anvin

remove div_long_long_rem

2008-05-01T15:03:58+00:00

x86 is the only arch right now, which provides an optimized for
div_long_long_rem and it has the downside that one has to be very careful that
the divide doesn't overflow.

The API is a little akward, as the arguments for the unsigned divide are
signed.  The signed version also doesn't handle a negative divisor and
produces worse code on 64bit archs.

There is little incentive to keep this API alive, so this converts the few
users to the new API.

Signed-off-by: Roman Zippel 
Cc: Ralf Baechle 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: john stultz 
Cc: Christoph Lameter 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

convert a few do_div users

2008-05-01T15:03:58+00:00

This converts a few users of do_div to div_[su]64 and this demonstrates nicely
how it can reduce some expressions to one-liners.

Signed-off-by: Roman Zippel 
Cc: john stultz 
Cc: Thomas Gleixner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

kernel: explicitly include required header files under kernel/

2008-04-29T15:06:04+00:00

Following an experimental deletion of the unnecessary directive

 #include 

from the header file , these files under kernel/ were exposed
as needing to include one of  or , so explicit
includes were added where necessary.

Signed-off-by: Robert P. J. Day 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

time: Export set_normalized_timespec.

2008-04-22T02:45:12+00:00

Sorry I have just realized set_normalized_timespec() (used in
timespec_sub()) is not exported, and link will fail because of it...

Signed-off-by: YOSHIFUJI Hideaki 
Signed-off-by: David S. Miller

avoid overflows in kernel/time.c

2008-02-08T17:22:39+00:00

When the conversion factor between jiffies and milli- or microseconds is
not a single multiply or divide, as for the case of HZ == 300, we currently
do a multiply followed by a divide.  The intervening result, however, is
subject to overflows, especially since the fraction is not simplified (for
HZ == 300, we multiply by 300 and divide by 1000).

This is exposed to the user when passing a large timeout to poll(), for
example.

This patch replaces the multiply-divide with a reciprocal multiplication on
32-bit platforms.  When the input is an unsigned long, there is no portable
way to do this on 64-bit platforms there is no portable way to do this
since it requires a 128-bit intermediate result (which gcc does support on
64-bit platforms but may generate libgcc calls, e.g.  on 64-bit s390), but
since the output is a 32-bit integer in the cases affected, just simplify
the multiply-divide (*3/10 instead of *300/1000).

The reciprocal multiply used can have off-by-one errors in the upper half
of the valid output range.  This could be avoided at the expense of having
to deal with a potential 65-bit intermediate result.  Since the intent is
to avoid overflow problems and most of the other time conversions are only
semiexact, the off-by-one errors were considered an acceptable tradeoff.

At Ralf Baechle's suggestion, this version uses a Perl script to compute
the necessary constants.  We already have dependencies on Perl for kernel
compiles.  This does, however, require the Perl module Math::BigInt, which
is included in the standard Perl distribution starting with version 5.8.0.
In order to support older versions of Perl, include a table of canned
constants in the script itself, and structure the script so that
Math::BigInt isn't required if pulling values from said table.

Running the script requires that the HZ value is available from the
Makefile.  Thus, this patch also adds the Kconfig variable CONFIG_HZ to the
architectures which didn't already have it (alpha, cris, frv, h8300, m32r,
m68k, m68knommu, sparc, v850, and xtensa.) It does *not* touch the sh or
sh64 architectures, since Paul Mundt has dealt with those separately in the
sh tree.

Signed-off-by: H. Peter Anvin 
Cc: Ralf Baechle ,
Cc: Sam Ravnborg ,
Cc: Paul Mundt ,
Cc: Richard Henderson ,
Cc: Michael Starvik ,
Cc: David Howells ,
Cc: Yoshinori Sato ,
Cc: Hirokazu Takata ,
Cc: Geert Uytterhoeven ,
Cc: Roman Zippel ,
Cc: William L. Irwin ,
Cc: Chris Zankel ,
Cc: H. Peter Anvin ,
Cc: Jan Engelhardt 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

time: fix typo in comments

2008-02-08T17:22:29+00:00

Fix typo in comments.

BTW: I have to fix coding style in arch/ia64/kernel/time.c also, otherwise
checkpatch.pl will be complaining.

Signed-off-by: Li Zefan 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: john stultz 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

speed up jiffies conversion functions if HZ==USER_HZ

2008-02-06T18:41:10+00:00

Avoid calling do_div(x, 1) in this case.

Cc: David Fries 
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

system timer: fix crash in <100Hz system timer

2008-02-06T18:41:10+00:00

The kernel has a divide by zero crash when trying to run the system timer
less than 100Hz.  The problem is x/(HZ/USER_HZ) and related.  Now
x*(USER_HZ/HZ) will be used if HZ
Cc: "H. Peter Anvin" 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

timekeeping: update xtime_cache when time(zone) changes

2008-02-01T16:45:13+00:00

xtime_cache needs to be updated whenever xtime and or wall_to_monotic
are changed. Otherwise users of xtime_cache might see a stale (and in
the case of timezone changes utterly wrong) value until the next
update happens.

Fixup the obvious places, which miss this update.

Signed-off-by: Thomas Gleixner 
Acked-by: John Stultz 
Tested-by: Dhaval Giani 
Signed-off-by: Ingo Molnar