linux-toradex.git/kernel/time/Makefile, branch v5.17-rc5

time: Improve performance of time64_to_tm()

2021-06-24T09:51:59+00:00

The current implementation of time64_to_tm() contains unnecessary loops,
branches and look-up tables. The new one uses an arithmetic-based algorithm
appeared in [1] and is approximately 3x faster (YMMV).

The drawback is that the new code isn't intuitive and contains many 'magic
numbers' (not unusual for this type of algorithm). However, [1] justifies
all those numbers and, given this function's history, the code is unlikely
to need much maintenance, if any at all.

Add a KUnit test for it which checks every day in a 160,000 years interval
centered at 1970-01-01 against the expected result.

[1] Neri, Schneider, "Euclidean Affine Functions and Applications to
Calendar Algorithms". https://arxiv.org/abs/2102.06959

Signed-off-by: Cassio Neri 
Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/r/20210622213616.313046-1-cassio.neri@gmail.com

clocksource: Provide kernel module to test clocksource watchdog

2021-06-22T14:53:17+00:00

When the clocksource watchdog marks a clock as unstable, this might
be due to that clock being unstable or it might be due to delays that
happen to occur between the reads of the two clocks.  It would be good
to have a way of testing the clocksource watchdog's ability to
distinguish between these two causes of clock skew and instability.

Therefore, provide a new clocksource-wdtest module selected by a new
TEST_CLOCKSOURCE_WATCHDOG Kconfig option.  This module has a single module
parameter named "holdoff" that provides the number of seconds of delay
before testing should start, which defaults to zero when built as a module
and to 10 seconds when built directly into the kernel.  Very large systems
that boot slowly may need to increase the value of this module parameter.

This module uses hand-crafted clocksource structures to do its testing,
thus avoiding messing up timing for the rest of the kernel and for user
applications.  This module first verifies that the ->uncertainty_margin
field of the clocksource structures are set sanely.  It then tests the
delay-detection capability of the clocksource watchdog, increasing the
number of consecutive delays injected, first provoking console messages
complaining about the delays and finally forcing a clock-skew event.
Unexpected test results cause at least one WARN_ON_ONCE() console splat.
If there are no splats, the test has passed.  Finally, it fuzzes the
value returned from a clocksource to test the clocksource watchdog's
ability to detect time skew.

This module checks the state of its clocksource after each test, and
uses WARN_ON_ONCE() to emit a console splat if there are any failures.
This should enable all types of test frameworks to detect any such
failures.

This facility is intended for diagnostic use only, and should be avoided
on production systems.

Reported-by: Chris Mason 
Suggested-by: Thomas Gleixner 
Signed-off-by: Paul E. McKenney 
Signed-off-by: Thomas Gleixner 
Tested-by: Feng Tang 
Link: https://lore.kernel.org/r/20210527190124.440372-5-paulmck@kernel.org

timekeeping: add CONFIG_LEGACY_TIMER_TICK

2020-10-30T20:57:04+00:00

All platforms that currently do not use generic clockevents roughly call
the same set of functions in their timer interrupts: xtime_update(),
update_process_times() and profile_tick(), sometimes in a different
sequence.

Add a helper function that performs all three of them, to make the
callers more uniform and simplify the interface.

Reviewed-by: Geert Uytterhoeven 
Reviewed-by: Linus Walleij 
Signed-off-by: Arnd Bergmann

ns: Introduce Time Namespace

2020-01-14T11:20:48+00:00

Time Namespace isolates clock values.

The kernel provides access to several clocks CLOCK_REALTIME,
CLOCK_MONOTONIC, CLOCK_BOOTTIME, etc.

CLOCK_REALTIME
      System-wide clock that measures real (i.e., wall-clock) time.

CLOCK_MONOTONIC
      Clock that cannot be set and represents monotonic time since
      some unspecified starting point.

CLOCK_BOOTTIME
      Identical to CLOCK_MONOTONIC, except it also includes any time
      that the system is suspended.

For many users, the time namespace means the ability to changes date and
time in a container (CLOCK_REALTIME). Providing per namespace notions of
CLOCK_REALTIME would be complex with a massive overhead, but has a dubious
value.

But in the context of checkpoint/restore functionality, monotonic and
boottime clocks become interesting. Both clocks are monotonic with
unspecified starting points. These clocks are widely used to measure time
slices and set timers. After restoring or migrating processes, it has to be
guaranteed that they never go backward. In an ideal case, the behavior of
these clocks should be the same as for a case when a whole system is
suspended. All this means that it is required to set CLOCK_MONOTONIC and
CLOCK_BOOTTIME clocks, which can be achieved by adding per-namespace
offsets for clocks.

A time namespace is similar to a pid namespace in the way how it is
created: unshare(CLONE_NEWTIME) system call creates a new time namespace,
but doesn't set it to the current process. Then all children of the process
will be born in the new time namespace, or a process can use the setns()
system call to join a namespace.

This scheme allows setting clock offsets for a namespace, before any
processes appear in it.

All available clone flags have been used, so CLONE_NEWTIME uses the highest
bit of CSIGNAL. It means that it can be used only with the unshare() and
the clone3() system calls.

[ tglx: Adjusted paragraph about clone3() to reality and massaged the
  	changelog a bit. ]

Co-developed-by: Dmitry Safonov 
Signed-off-by: Andrei Vagin 
Signed-off-by: Dmitry Safonov 
Signed-off-by: Thomas Gleixner 
Link: https://criu.org/Time_namespace
Link: https://lists.openvz.org/pipermail/criu/2018-June/041504.html
Link: https://lore.kernel.org/r/20191112012724.250792-4-dima@arista.com

timekeeping: Provide a generic update_vsyscall() implementation

2019-06-22T19:21:06+00:00

The new generic VDSO library allows to unify the update_vsyscall[_tz]()
implementations.

Provide a generic implementation based on the x86 code and the bindings
which need to be implemented in architecture specific code.

[ tglx: Moved it into kernel/time where it belongs. Removed the pointless
  	line breaks in the stub functions. Massaged changelog ]

Signed-off-by: Vincenzo Frascino 
Signed-off-by: Thomas Gleixner 
Tested-by: Shijith Thotton 
Tested-by: Andre Przywara 
Cc: linux-arch@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@vger.kernel.org
Cc: linux-kselftest@vger.kernel.org
Cc: Catalin Marinas 
Cc: Will Deacon 
Cc: Arnd Bergmann 
Cc: Russell King 
Cc: Ralf Baechle 
Cc: Paul Burton 
Cc: Daniel Lezcano 
Cc: Mark Salyzyn 
Cc: Peter Collingbourne 
Cc: Shuah Khan 
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Rasmus Villemoes 
Cc: Huw Davies 
Link: https://lkml.kernel.org/r/20190621095252.32307-4-vincenzo.frascino@arm.com

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

time: Remove CONFIG_TIMER_STATS

2017-02-10T10:15:08+00:00

Currently CONFIG_TIMER_STATS exposes process information across namespaces:

kernel/time/timer_list.c print_timer():

        SEQ_printf(m, ", %s/%d", tmp, timer->start_pid);

/proc/timer_list:

 #11: <0000000000000000>, hrtimer_wakeup, S:01, do_nanosleep, cron/2570

Given that the tracer can give the same information, this patch entirely
removes CONFIG_TIMER_STATS.

Suggested-by: Thomas Gleixner 
Signed-off-by: Kees Cook 
Acked-by: John Stultz 
Cc: Nicolas Pitre 
Cc: linux-doc@vger.kernel.org
Cc: Lai Jiangshan 
Cc: Shuah Khan 
Cc: Xing Gao 
Cc: Jonathan Corbet 
Cc: Jessica Frazelle 
Cc: kernel-hardening@lists.openwall.com
Cc: Nicolas Iooss 
Cc: "Paul E. McKenney" 
Cc: Petr Mladek 
Cc: Richard Cochran 
Cc: Tejun Heo 
Cc: Michal Marek 
Cc: Josh Poimboeuf 
Cc: Dmitry Vyukov 
Cc: Oleg Nesterov 
Cc: "Eric W. Biederman" 
Cc: Olof Johansson 
Cc: Andrew Morton 
Cc: linux-api@vger.kernel.org
Cc: Arjan van de Ven 
Link: http://lkml.kernel.org/r/20170208192659.GA32582@beast
Signed-off-by: Thomas Gleixner

posix-timers: Make them configurable

2016-11-16T08:26:35+00:00

Some embedded systems have no use for them.  This removes about
25KB from the kernel binary size when configured out.

Corresponding syscalls are routed to a stub logging the attempt to
use those syscalls which should be enough of a clue if they were
disabled without proper consideration. They are: timer_create,
timer_gettime: timer_getoverrun, timer_settime, timer_delete,
clock_adjtime, setitimer, getitimer, alarm.

The clock_settime, clock_gettime, clock_getres and clock_nanosleep
syscalls are replaced by simple wrappers compatible with CLOCK_REALTIME,
CLOCK_MONOTONIC and CLOCK_BOOTTIME only which should cover the vast
majority of use cases with very little code.

Signed-off-by: Nicolas Pitre 
Acked-by: Richard Cochran 
Acked-by: Thomas Gleixner 
Acked-by: John Stultz 
Reviewed-by: Josh Triplett 
Cc: Paul Bolle 
Cc: linux-kbuild@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Michal Marek 
Cc: Edward Cree 
Link: http://lkml.kernel.org/r/1478841010-28605-7-git-send-email-nicolas.pitre@linaro.org
Signed-off-by: Thomas Gleixner

time: Remove development rules from Kbuild/Makefile

2015-07-01T07:57:35+00:00

time.o gets rebuilt unconditionally due to a leftover Makefile rule
which was placed there for development purposes.

Remove it along with the commented out always rule in the toplevel
Kbuild file.

Fixes: 0a227985d4a9 'time: Move timeconst.h into include/generated'
Reported-by; Stephen Boyd 
Signed-off-by: Thomas Gleixner 
Cc: Nicholas Mc Guire

time: Move timeconst.h into include/generated

2015-05-19T13:13:45+00:00

kernel/time/timeconst.h is moved to include/generated/ and generated 
by the top level Kbuild. This allows using timeconst.h in an earlier
build stage.

Signed-off-by: Nicholas Mc Guire 
Cc: Masahiro Yamada 
Cc: Sam Ravnborg 
Cc: Joe Perches 
Cc: John Stultz 
Cc: Andrew Hunter 
Cc: Paul Turner 
Cc: Michal Marek 
Link: http://lkml.kernel.org/r/1431951554-5563-1-git-send-email-hofrat@osadl.org
Signed-off-by: Thomas Gleixner