linux-toradex.git/kernel/time/clocksource.c, branch Colibri_T30_LinuxImageV2.3Beta1_20140804

clocksource: Fix bug with max_deferment margin calculation

2011-12-09T16:55:55+00:00

commit b1f919664d04a8d0ba29cb76673c7ca3325a2006 upstream.

In order to leave a margin of 12.5% we should >> 3 not >> 5.

Signed-off-by: Yang Honggang (Joseph) 
[jstultz: Modified commit subject]
Signed-off-by: John Stultz 
Signed-off-by: Greg Kroah-Hartman

clocksource: Avoid selecting mult values that might overflow when adjusted

2011-12-09T16:54:24+00:00

commit d65670a78cdbfae94f20a9e05ec705871d7cdf2b upstream.

For some frequencies, the clocks_calc_mult_shift() function will
unfortunately select mult values very close to 0xffffffff.  This
has the potential to overflow when NTP adjusts the clock, adding
to the mult value.

This patch adds a clocksource.maxadj value, which provides
an approximation of an 11% adjustment(NTP limits adjustments to
500ppm and the tick adjustment is limited to 10%), which could
be made to the clocksource.mult value. This is then used to both
check that the current mult value won't overflow/underflow, as
well as warning us if the timekeeping_adjust() code pushes over
that 11% boundary.

v2: Fix max_adjustment calculation, and improve WARN_ONCE
messages.

v3: Don't warn before maxadj has actually been set

CC: Yong Zhang 
CC: David Daney 
CC: Thomas Gleixner 
CC: Chen Jie 
CC: zhangfx 
Reported-by: Chen Jie 
Reported-by: zhangfx 
Tested-by: Yong Zhang 
Signed-off-by: John Stultz 
Signed-off-by: Greg Kroah-Hartman

clocksource: Make watchdog robust vs. interruption

2011-06-16T17:30:53+00:00

The clocksource watchdog code is interruptible and it has been
observed that this can trigger false positives which disable the TSC.

The reason is that an interrupt storm or a long running interrupt
handler between the read of the watchdog source and the read of the
TSC brings the two far enough apart that the delta is larger than the
unstable treshold. Move both reads into a short interrupt disabled
region to avoid that.

Reported-and-tested-by: Vernon Mauery 
Signed-off-by: Thomas Gleixner 
Cc: stable@kernel.org

clockevents/source: Use u64 to make 32bit happy

2011-05-20T08:50:52+00:00

unsigned long is not 64bit on 32bit machine.

Signed-off-by: Thomas Gleixner

Merge branch 'timers-clockevents-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2011-05-20T00:44:40+00:00

* 'timers-clockevents-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: hpet: Cleanup the clockevents init and register code
  x86: Convert PIT to clockevents_config_and_register()
  clockevents: Provide interface to reconfigure an active clock event device
  clockevents: Provide combined configure and register function
  clockevents: Restructure clock_event_device members
  clocksource: Get rid of the hardcoded 5 seconds sleep time limit
  clocksource: Restructure clocksource struct members

clocksource: Get rid of the hardcoded 5 seconds sleep time limit

2011-05-19T12:24:15+00:00

Slow clocksources can have a way longer sleep time than 5 seconds and
even fast ones can easily cope with 600 seconds and still maintain
proper accuracy.

Signed-off-by: Thomas Gleixner 
Cc: John Stultz 
Reviewed-by: Ingo Molnar 
Link: http://lkml.kernel.org/r/%3C20110518210136.109811585%40linutronix.de%3E

clocksource: Install completely before selecting

2011-05-05T13:23:26+00:00

Christian Hoffmann reported that the command line clocksource override
with acpi_pm timer fails:

 Kernel command line:  clocksource=acpi_pm
 hpet clockevent registered
 Switching to clocksource hpet
 Override clocksource acpi_pm is not HRT compatible.
 Cannot switch while in HRT/NOHZ mode.

The watchdog code is what enables CLOCK_SOURCE_VALID_FOR_HRES, but we
actually end up selecting the clocksource before we enqueue it into
the watchdog list, so that's why we see the warning and fail to switch
to acpi_pm timer as requested. That's particularly bad when we want to
debug timekeeping related problems in early boot.

Put the selection call last.

Reported-by: Christian Hoffmann 
Signed-off-by: John Stultz 
Cc: stable@kernel.org # 32...
Link: http://lkml.kernel.org/r/%3C1304558210.2943.24.camel%40work-vm%3E
Signed-off-by: Thomas Gleixner

Merge branches 'core-fixes-for-linus', 'x86-fixes-for-linus', 'timers-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

2011-01-15T20:45:00+00:00

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: avoid pointless blocked-task warnings
  rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status
  rtmutex: Fix comment about why new_owner can be NULL in wake_futex_pi()

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, olpc: Add missing Kconfig dependencies
  x86, mrst: Set correct APB timer IRQ affinity for secondary cpu
  x86: tsc: Fix calibration refinement conditionals to avoid divide by zero
  x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timekeeping: Make local variables static
  time: Rename misnamed minsec argument of clocks_calc_mult_shift()

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Remove syscall_exit_fields
  tracing: Only process module tracepoints once
  perf record: Add "nodelay" mode, disabled by default
  perf sched: Fix list of events, dropping unsupported ':r' modifier
  Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return"
  perf top: Fix annotate segv
  perf evsel: Fix order of event list deletion

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2011-01-13T18:05:56+00:00

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.

time: Rename misnamed minsec argument of clocks_calc_mult_shift()

2011-01-12T11:23:12+00:00

The minsec argument to clocks_calc_mult_shift() is misnamed. It is used 
to clamp the magnitude of the mult factor so that a multiplication with 
any value in the given range won't overflow a 64 bit result.  Let's 
rename it to match the actual usage.

Signed-off-by: Nicolas Pitre 
Acked-by: John Stultz 
LKML-Reference: 
Signed-off-by: Thomas Gleixner